ZD racing pirates 3 9021 swapping stock for 6s 150amp 2000kv motor

[@rcaddictgarage]

Ya crazy!! In a good way👍

[@brothersRC01]

Cheers buddy 💪

[@adopancia7445]

Did a very similar mod (same esc, same wheels, Savage Flux Tork 2200kv motor), with these smaller wheels you need to use at least a 18 or 19T pinion otherwise the original gearing is too small. I also compressed about half inch the front shocks (just use a couple of nylon ties) and something less on rear shocks. On 6S I had 106kmh on first 5 minutes test today. Hoping for 110kmh with some more testing and adjustments. P.s. use medium loctite on the pinion and motor assembling ring, otherwise pinion keeps going easily out). On tarmac of course you can easily gain some 5 or 6kmh. Anyway nice video bros.

[@brothersRC01]

Thanks buddy for the advice will try all that next Speedrun

[@deanopud69]

Love the content.this channels gonna get big

[@brothersRC01]

Thanks heaps I really do hope we go big it would be so nice 😊 if we did ☺️

[@chadcooper6364]

That was so much fun bro .

[@OnTheEDge2011]

that was FUN!!!!!!!!!!!!!

[@FAJETTO1]

Hi you used two 5000mah batteries for the zd racing 9021, it worked or gave problems, but the esc works at 6s or 4s, to make it work at 4s which batteries should I use? i would not run it at 6s risk of burning the esc and the motor

[@tahayt6142]

Yo where did u get the wheel bar from?

[@FAJETTO1]

Hi where did you buy the 150 amp plus esc motor kit

[@brothersRC01]

Yes it was a combo I put link to item in description