Zebra ZP450 network set up

[@edwinalmengor4656]

Thank you very much for taking the time to post this video. It was very helpful and used it to setup the ZP450 network printer and was able to configure to UPS and ShipStation. Great job and appreciate the excellent video.

[@coolandmellow]

Can you set up the zp450 with a wireless router using the USB port on the router .I tried one time couldn't see it on the router settings with a netfear x6 wifi router

[@nickvlach3015]

I am having a hard time getting my zebra zp450 setup. I can't get to the page to turn the printer port to "permanent". Is there another way to do that?

[@inachu]

THe manual from ZB for factory reset by letting the light flash 4 times then release button does not work

[@lucero777torres]

wheres the link to set up printer

[@craigmiller7889]

You didn't configure the Static IP correctly. After you submitted your changes 2:48 you received "Changes were successfully saved (TEMPORARILY).

[@onlytwothings]

Excellent video thank you for taking the time to make this.

[@vivasaopaulodicas]

Hello! Thanks for your videos, but I've got one doubt to configure this printer on a DHCP network... how do I configure the same printer but using a DHCP printer server on the network? Thanks in advance for any help you can drop me... best regards!

[@solutionsgem]

Hi, By default these printers are set up as DHCP network. That means that as soon as you connect it to the network, your router will automatically assign an IP address for you. If your printer has a permanent IP address on the memory, the printer will not allow the router to assign the IP address. If that is the case, you need to reset the printer network connection. Watch this video to help you doing it manually from the printer. kzbin.info/www/bejne/iKjSdaZvisqWerc After you do that, the printer will let the router assign the IP automatically. Hope that helps.

[@ja_dor58]

It prints the test label but won’t print out the actual label. Please help

[@solutionsgem]

What test label are you printing? test label from computer or from the printer? The test label from the printer does not mean it will work with your computer. Have you tried connecting the printer to your computer via USB cord to test the printer first? Where did you buy the printer from? They might offer tech support. We offer tech support for a small fee via remote computer connection.

[@appleintosh]

When I connect the printer to my network, I’m not able to communicate with it over the network. I can print the configuration page, and the printer has an IP, but when I try to create the port it’s unable to connect to the printer. I also can’t get to the printer’s web interface by entering the IP in a browser. It just loads for a minute and then times out. The Ethernet cable I’m using is good, I’ve tested it, and when I plug the cable in, the link light on my switch turns on.

[@solutionsgem]

Hi, That sounds like your printer has a permanent IP address saved on the printer memory. Is likely that IP address is not compatible with your router or network. You need to reset the printers network system. You can watch this video that will show you how to do it: kzbin.info/www/bejne/iKjSdaZvisqWerc Try getting the IP address and go to the configuration page. If that works, your printer is ready to be configured on the network. We offer technical support to our customers free of charge. If you did not buy the printer from us, you can call us, we can offer you tech support for a fee. Good luck.

[@RBTGames]

I did all this and everything worked properly up until I tried to print a test page. It refuses to actually print anything.

[@solutionsgem]

These printers are tricky. If the IP address is not set up correctly it will not work. We offer tech support via phone and computer connection for a fee. If we are not able to make it work, we will not charge you anything. We will even buy your printer and or sell you one of our tested printer included tech support.

[@RBTGames]

@@solutionsgem Turns out it was a driver issue. the version i downloaded wasn't compatible with the version of my printer. I deleted everything and started fresh with a new driver and the printer started working flawlessly.

[@coreywilliams2440]

Does zebra 450 work with Lenovo laptop the zebra 450 does not have the ethernet connection I'm trying to get it back online what do I do?

[@solutionsgem]

Hi, Yes the ZP450 printer works with your Lenovo laptop assuming you have windows or linux OS installed and an open USB 2 port on your computer. Then you need to search for the Zebra ZP450 driver. We recommend this driver: www.seagullscientific.com/support/downloads/drivers/zebra/download/ This driver is from a third party company called Seagull Scientific that offers a barcoding program called Bartender. That is by far the easiest driver to install. Before you install the printer, make sure the printer is on and connected to your computer via USB. Make sure it has labels and the status light is solid green. Then download the driver and install it. We offer free tech support to the customers that buy the printer from us. We also offer tech support to people that did not buy the printer from us for a fee. I hope this helps.

[@Bondhio]

i installed drivers and setup printer correctly yet everytime i print a test label or try to print a shipping label the printer prints out a random barcode that says dws id label

[@solutionsgem]

Hi, That means your printer was programed to print that label every time you send a job to it. You have to format its memory so it does not that again. You can do that with the driver called Seagull Scientific Did you buy this printer from Solutionsgem? If you did not, you can ship the printer to us and we will reprogram it for you. It will cost $59 with return shipping included.

[@kassimsalleh5753]

Great tutorial. Can gk 420 work with window xp 32 computer

[@solutionsgem]

Thank you. Yes GK420d printers works with XP computers

[@asifdurrani1636]

any idea about macbook?

[@solutionsgem]

I you have the Zp450 with ethernet or any other ethernet connected G series Zebra printer, you can make it work with your Mac. Just need to go to your Settings, Printers and Scanners, Add a printer. Click on the IP icon on upper left hand corner. The address will your printer's IP address. Example 010.000.001.010 IP type 10.0.1.10 Protocol will be Line Printer Daemon- LPD. Leave Queue blank. You can name the printer anything you want. You can leave location blank or describe the location if you need it. Click "Use" drop down menu, choose select software. Choose the last driver on the list called Zebra ZPL Label printer. Click Add. Then test your printer by printing a label. Do not forget to change the label size before you print the label. If you are printing a 4 x 6 label, make sure to change the paper size to 4 x 6. Let us know if that works for you. We offer technical support via phone and remote computer for a small fee. Have a great day!

[@ronvonbon]

Wireless setup please. I purchased a ZP450 from you, I need it for wireless ?????

[@solutionsgem]

Hi, Thank you for your business! Unfortunately the ZP450 is not a wireless printer. There are a few Zebra printer versions like the GX420d with an intention wireless printer server that can connect to you WiFi network. The ZP450 only have a USB and two versions have Ethernet connection. The ethernet connected printer needs to connect to your rougher via Ethernet cable. After is all configured with your router and you have your printer IP address, then you can print wirelessly to it. Is that what you mean? Do you have an ethernet connected ZP450? We offer free tech support to all our customers.

[@ronvonbon]

@@solutionsgem you sold it to me as a wireless printer last year, you were on the phone with my girlfriend and had it set up wireless. we moved and forgot how to set it up. plus you sold us the airport express.

[@solutionsgem]

Hi, Please give is a call at 888 407 6757. We will look up your order and help you via remote computer connection. Have a great day!

[@rpmk2000]

@@ronvonbon did you set up wireless with this? I’m looking for a solution now as well.

[@ronvonbon]

@@rpmk2000 i did about 2 years ago, everything was great. new pc and now i do not remember how, sorry.

[@mariolorenzo563]

Can I print out the configuration on a 2x3 paper?

[@solutionsgem]

Hi, It should work, however the default label size on these printer 4 x 6. The smaller label might not have all the information. It would be easier to install the driver, change the labels size in the driver. Then you can get the configuration label. That way it will know up have a smaller label and will fit all the configuration info.

[@breenmt09]

Dont u think the IP setup with dedicated pseudo ports and printer queues was/is a bit overkill to just set this machine up for printing labels for ebay or USPS???? I mean sure - if you are putting this in on the shop floor of a large shipping facility (u got the wrong Zebra) or in an IP network like Procter & Gamble go for it. Simple USB or serial or even a null Ethernet cable would be so so so much easier. For CCNA purposes, this instruction is appropriate.

[@solutionsgem]

Hi, Thank you for your your comments. Most of our customers get the printer with the USB connection. That is by far the easiest way to print labels. We have a few of our Zebra ZP printers with the Ethernet Connection Built in. These printers are not as common but we usually have a few in stock. Customers that need to share their printer on the network, find the ethernet connected printer much easier to use.

[@ma93256]

I’m just getting all zeros on IP address and it’s connected Ethernet

[@solutionsgem]

Hi, That usually means the cable or the router is not working correctly. Can you try another cable or another port in the router?

[@markabrams855]

hello, i have zp505 and i am having issues seting it up

[@solutionsgem]

You have to make sure the port setting is right when installing the printer. Most of the people choose the LPT1 port. You have to choose the USB port. That should help you. We can help you a remote computer connection for a small fee. You can call us at 888 407 6757 and ask for Al. Good luck.

[@lanahakundy6625]

So when I print the test config page I do not get an IP address

[@solutionsgem]

Hi, If you do not get an IP address, your printer does not have the Ethernet Card Built In. ZP450 printer with built in ethernet are rare and more expensive. We have external Ethernet Cards that connect to the Parallel Port available. They cost $69 with shipping and technical support included.

[@main1411]

@@solutionsgem Hey how do i set zp450 usb with wireless network print server from startech?

[@RBTGames]

any idea why, every time after i set it to permanent and click save, it resets my ip to 0.0.0.0 and doesnt let me connect until i reset the print server?

[@solutionsgem]

Hi, Unfortunately we have never encounter that issue in the past. Try restarting your router. It might not be allowing you to do that. Do you have another router you can try the printer with?

[@RBTGames]

@@solutionsgem I actually figured it out. something about the zebranet print server didn't like setting a permanenet ip. I had to reset the actual zebranet card by using the small button to the side of the ethernet port on the back of the printer. Once i reset the zebranet card, it was able to reassign an IP address. The instructions weren't in the printer manual unfortunately. I didnt see them until i looked at the zebranet help document,

[@rayannamarie7932]

question!!

[@solutionsgem]

How can we help you?

[@rayannamarie7932]

solutionsgem whenever i set it up it never goes all the way through and i don’t have no ip address when the receipt prints

[@solutionsgem]

@@rayannamarie7932 When you print the configuration label, you should have an additional paper with the IP address. If the address is 000.000.00 means your router is not assigning an IP address to your printer or your printer has a permanent IP programed in to its memory. You might want to reset the printer server by watching this video for a similar printer here. kzbin.info/www/bejne/iKjSdaZvisqWerc. That might fix your issue.

[@amiruldarwish]

do zebra support bartender driver? no right, better uses zebra driver

[@solutionsgem]

Hi, The driver we recommend on your website is the Bartender Driver. Yes it works perfectly with the Bartender Driver. It works better than the original Zebra driver.

[@GimmeSomeMo]

I didn't get a configuration

[@solutionsgem]

Hi, You have to hold the feed button and release it when the lift flashes once. That will give you the configuration label along with the Network Configuration network. Please make sure the printer is turned on and the green light is solid. You need to make sure the ZP450 has an Ethernet connection on the back. If your printer does not have an Ethernet connection on the printer, it will not work. ZP450 with Ethernet connection as not very common.

[@Omiu247]

what ip address am I supposed to enter?

[@solutionsgem]

Hi, You are not supposed to enter the IP address. Your router needs to assign the IP address automatically. When you connect the printer to your router, if the printer is set up correctly, your router will assign an open IP address. Then you hold the feed button and let it flash once. That will print your configuration label and the IP assigned to your printer. Then you can follow the instructions on the video to set up your printer on your computer. We offer technical support via phone and remote computer connection in case you need additional help.

[@solutionsgem]

By the way, we charge a fee for the remote computer connection. Let us know if you need help.

[@EvermontKing]

I'm not getting an up address its just a printer configuration print out

[@solutionsgem]

Hi, That usually means you do not have a Zebra ZP450 with a built-in​ network adapter. Do you know if you have an ethernet connected Zebra Printer? Most of the ZP450 printers are USB connected printers.

[@johncrowcc]

@@solutionsgem yo if we have a usb connected one and we still get a 127.0.0.1 loopback on ups how do we fix it?

[@solutionsgem]

Hi, That usually means you are not using the right browser or the java program is not working correctly. We recommend using Google Chrome browser and download and install the Applet from UPS website. You can also use google chrome and do not use the zebra format. Use the Laser or Inkjet format. When you go to print, choose your Zebra printer, change the orientation to landscape and set the margins to none. That way do you not have to worry about Java not working or installing the Applet. We can help you a remote computer connection for a small fee. You can call us at 888 407 6757 and ask for Al. Good luck.

[@frenkyb123]

Big thanks :)

[@roblox-vlogwilliamman8417]

I'm disappointed it doesn't work with chromebook

[@solutionsgem]

It works with Chrome Books with USB connection. We have not tested the Ethernet Connection.

[@elevated-apparel]

I have 5 of these with the ethernet connection im selling.

[@solutionsgem]

Hi, We are interested on the 5 count ZP450 with network Please call us at 888 407 6757 of contact is via email. Thank you for letting us know.

[@elevated-apparel]

@@gabecevallos3250 yes

[@elevated-apparel]

@@gabecevallos3250 you can text me at 714-7158649

[@elevated-apparel]

@@gabecevallos3250 sold them all