The Complete Guide To Master Serum|10# Wavetable Editor

[@Seriouscoconut]

So i've googled DC offset a bit: DC- means Direct Current. It has to do with the Architecture of the device. If an electronic device has no current its off. So to keep it active you make use of Direct Current (a very low current to keep it going) This means that you are not centered to 0 (=0 voltage) but slightly higher or lower. You can see DC offset by zooming in on a view of a waveform. If the clip’s zero-crossing line - the place where the waveform crosses from positive to negative voltage or vice versa - is actually not at zero, but higher or lower, you’ve got DC offset. If you hear clicks or experience low-level distortion you can check for DC offset by recording a few seconds of silence. If the resulting waveform appears above or below the zero line, there’s probably DC offset. The “Remove DC Offset ” function- and Logic Pro, Digital Performer, Sound Forge, and most other digital audio applications include this - is an easy way to eliminate the DC component from audio signals. If you want to read more: www.sweetwater.com/insync/what-remove-dc-offset-plug-daw-software/

[@demolitionkid2]

Omfg you really dont know what dc offset is but youve mastered the serum wavetable editor 😂 man i feel you. You can learn something inside and out and still feel lost af lmao. Dc offswt removes the inaudible highs and lows that eat up headroom in mixes. Needs to be the first plugin fx on every individual sound being put through the daw. You do t hear a dif until you go to master and it doesnt sound right.

[@ShaharHarshuv]

2:07 Seems like this enables you to set the amount of each overtone (frequency from the harmonic series). This is really cool and in my opinion a much better way to envision sound then to look at the waveform. It can also be used to inspect the overtones of some basic shapes. As a beginner that's quite useful for me.

[@epidote6020]

On the additive part it's basically a spectrum but you can adjust each harmonic amplitude. The grey boxes are the root frequency. And the box bellow it is where you can adjust the phase of each harmonic. I get way better results from it then the draw section. I usually use it to get a starting table to then FM and resample a bunch.

[@mortenrobinson]

Haven't tried serum yet, but I already love it! What a lovely interface! Native Instruments could really learn something here!

[@hasnaatsaeed4]

Appreciate the complete guide tutorials

[@CyberWallX]

as far as i know the dc offset neutralizes a raised offset from the zero line caused by a superpositioned straight signal. so lets say for example you dont use a virtually generated waveform, but one you recorded with an active microphone, the power supply of these mics will often generate this offset. neutralizing this will leave you more headspace for positive and negative amplitude meaning potencially more volume. im not quiet sure if this is 100% correct, so better dont quote me, but thats the way i got it. awesome vid as usual!

[@mixanalogcloud]

Awesome guide! You really left no stone unturned and it's easy to follow. Thanks!

[@rohanmajrikar5494]

Brass stabs, vocals, vocal chops tutorials please! Your serum and sylenth1 tutorials are the best!!!!

[@ProducerJS]

You're correct, remove DC offset basically centers the waveform so that you've got a more even push and pull of the speaker cone!

[@saengGang93]

Ace, straight to the point. Nice one

[@AudioBoi1]

That is awesome tutorial. You create cool sounds out of nowhere. Need to watch your series through

[@Devlife2]

bro I'm 1 minute in and I already love you

[@Devlife2]

I love the fact that you play around with the knobs and always let us hear what u mean

[@Devlife2]

WDYM REMAP IT?

[@DJFTLM]

AWESOME video. Super intuitive way to do it as you said. Keep up the good work papi

[@dragonflythemusician]

You were supposed to make sounds with serum. did you eat it? You're great!

[@tiagoayresnunes]

Awesome content!

[@MrNoob-wv2ov]

Damn bro this was a good tutorial. I've been watching virtual riots ways of making tables and lately wanted to make my own. You speak fast making it short but people can pause or rewatch if they don't understand. Well done on this. I learned alot

[@MrNoob-wv2ov]

Sad every comment I see is people talking about DC offset haha sounds like they shouldn't have been watching the video in the first place

[@MrNoob-wv2ov]

Only thing I think you could have done better is when showing cross fade click on the wave table outside of Editor. Gives a visual of the Crossfade

[@CarlJames10]

i appreciate you man.. youve taught me so much

[@nikku1166]

Cool video. I've watched a bunch of these wave editor manipulation videos (virtual riots, ARTFX, Etc.) mostly converting samples into wavetables. I just don't do it enough and end up forgetting critical parts and then jumping back on youtube. I definitely need to build myself a good user library of them. That "kinda saw" shape is basically an "analog saw" with the crossover being dead center instead of the 12% lean to the left the analog saw has. at least that's how my brain thinks of it... we should give it name though. actually, it prob has one. maybe someone will jump in here with it.

[@MrNoob-wv2ov]

Same I started by watching virtual riot haha

[@MrNoob-wv2ov]

Seems he only does drag and drop not actually make them.

[@mooremoneymakin]

Didn't think I'd be using the wavetable editor but I might after this! :-)

[@freshair4165]

I would love to see a video about waveforms and what you can do with each type

[@hydralicious9315]

Very nice. Thank you.

[@frederickgodsell561]

Really helpful. Thanks bro!

[@Veltree]

Most helpful series on youtube! Also should this be #9 not #10?

[@tazcerogers2947]

Keep bringing the content we love! Thanks

[@riseoftheflutes1739]

Thank you for this video. Taught me alot of new things!

[@utah710]

Bro who you think you are skipping #9 apple?

[@livebymusic9345]

Thanks for posting such good content

[@jkjk-uq2vi]

This is exactly what i wanted bro 🤙

[@lukehrm]

Thanks for this video! Quite helpful, but a bit too much screaming - not just in the wavetables ;)

[@JohnJohnCrusher]

You said nothing about the top area of bins that in your video is empty. What is the difference between the upper bins and the lower bins?

[@lunarsann5499]

@zen do you think we can be artists?? like them big names>?

[@cameronuys3349]

This is sick

[@luming7479]

can anyone explain whats the diference between morph - crossfade and morph - spectral?

[@hasnaatsaeed4]

Nice

[@psychedelicgazelle1588]

If you want to understand how additive synthesis works, watch Andrew Huang's video on the harmonic series (titled "The most mind-blowing concept in music")

[@snysound]

Awesome! Thanks for sharing :)

[@martinariza7562]

@@snysound thanks mate regards from argentina

[@acg012]

Gracias man! Otro tutorial SUPER útil!

[@RecklessMagz]

What happened to the beep beep/boop boop intro? That’s the best part of your videos lol

[@dillonhuscher2376]

If you want to learn how to use the top section, watch how to make any genre hyper by you suck at producing. Time stamp 4:45

[@SuperEmanuel98]

Remove DC offset removes shit that does not make a sound in a way. Try making a sine wave in the top of the centre never crossing the center line and try to remove DC offset and you will see what it does

[@baconsogood454]

Where's my "BUP BUP!"??

[@tupacsleftnut4995]

someone didnt rewatch the intro for his own video👀

[@nix-tube]

my brain hurts

[@5T45H]

Hola Hermano !! I want to suggest here an idea for your tutos. I was watching this: vimeo.com/162505232 nice tuto on how to make this deep techno darkish chords BUT is for Massive (which sucks a bit I'm using serum now). It would be cool to go over this dark chords and its possibilities and uses in serum and how to polish a little bit with serum fx. Mucha gracias

[@cookiesandcream8442]

I can create thi-VVVVVVVVVVVV

[@aelphind4954]

LMAO

[@borenyaborn]

It's never gonna happen man...No matter how hard we work :"( ...We dont the luck :"(

[@sorreal5202]

comment for salary

[@Emodi69]

balla

[@Bigleg2]

So its not a complete guide

[@Hockeyguyman]

you need to learn to speak more succintly and unambiguously. Also don't do tutorials on things you dont understand fully, you are doing everyone who watches this a disservice by spreading incomplete and partially inaccurate info.

[@MrNoob-wv2ov]

Gonna mock a man giving a tutorial on something further than just using stock tables or someone else's samples watch something else.

[@MrNoob-wv2ov]

I particularly liked how he talked about the entire tutorial. Was fast everything was to the point he said what he didn't understand.

[@luisdanielacevedo7378]

Pro tip: ask chat gpt for furmulas!