zt.kaiusaltd.com/knives/knife... Follow me on Instagram: / epicsnugglebunny
Пікірлер: 129
@Rivy_ID6 жыл бұрын
I love the improvements ZT made here. The pivot, the internal milling, especially the "Zero Tolerance" milled internally, the minimal branding. It's really just excellently done.
@DaveWillis15 жыл бұрын
I never thought I'd edc a knife that big but it doesn't feel big in the pocket. I love it.
@CedricAda6 жыл бұрын
Damn the scales look way better with that slight change.
@Tenskwatawa4U6 жыл бұрын
A clear case of Bigger is Better.
@shaunpearson79055 жыл бұрын
No other knife I have closes so smoothly and satisfyingly. Love it.
@EpicSnuggleBunny5 жыл бұрын
I have to agree
@junmin64646 жыл бұрын
"Give our wallets a break" Lmao
@avldxvw6 жыл бұрын
Looks like a great improvement over the 0460. I think I'll have to pick one up. Thanks for sharing.
@Lungorthin6666 жыл бұрын
I honestly quite liked the 'rusty' red carbon fiber, but that bright red looks goooood. I like the size upscale as well
@Lonewolfmike5 жыл бұрын
I got the sprint run of the 0462 in BW and tan G-10 and it is a really nice knife.
@Watchandcutgearchannel6 жыл бұрын
This is something I wanted to see as a video. I want it more now that I’ve seen this
@5hoyuChicken6 жыл бұрын
Awesome vid, looks like I’m putting in a pre-order! I’m very happy about the option for left carry, and the flipper tab looks more finger-friendly than the 0460.
@troywheatley7446 жыл бұрын
Nice one Mr. Bunny...i dig that cf...looks slick
@brycewalts24446 жыл бұрын
I love all the models ZT made this year the one thing I wished they changed with the 462 is the sharpening notch isn’t big enough to clear the plunge grind witch is why the secondary is uneven great vid though
@franksalem85806 жыл бұрын
I bought one and love it now but had to make a modification. It wouldn't flip with my finger or fingers resting on the lock bar frame. So I took it apart and removed the screw holding the over travel plate in place and bent the frame a few thousands of an inch to take the pressure off the detente and now it is perfect. Thanks for a great video.
@EpicSnuggleBunny6 жыл бұрын
Glad you were able to optimize the knife for your use! Thanks for watching!
@slidetek6 жыл бұрын
Seriously, where were these guys a year ago? Could have kept my hedonic treadmill on slow for a little longer. Then again, I guess I can buy all 3 for the cost of a single custom. Thank goodness they got the CF color right, the -baby poop- bronze color didn't do much for me.
@hellcatdave16 жыл бұрын
Wish it was plain CF though.
@jacknemo80216 жыл бұрын
Really? Spyderco grind and polish is damn low and poorly executed at it's price point.
@Ondal16 жыл бұрын
The 0460 turned out to be too small for my usage, but a brilliant knife with drop shot at that size, slichy shape and perfect action. The 0462 however removes the small, the "zero tolerance" on clip and moves up the size to usable for me. Think it'll be my best knife of the year. It's a must have in my book.
@mj16536 жыл бұрын
Got this bad boy on pre order, love sinkevich designs.
@abc456f6 жыл бұрын
SPECTRE 21 Knifecenter has them in stock, just ordered one. I saw Bladehq only had preorders.
@knives2my4976 жыл бұрын
Love it!
@Bwbravowhiskey6 жыл бұрын
Definitely going to get this one
@MrBlessed706 жыл бұрын
Love the looks of this one-wish handle colours were varied though.Would love a dark blue.
@juanpareja91006 жыл бұрын
Love it 😊
@grumpyoldwizard4 жыл бұрын
The 460 is good for small hands, the 462 is easier to hold for bigger hands. This is a big difference. I have both; the small bronze (its listed as bronze on the description, not brown) 460 fits my wife’s hand, the 462 fits my hand perfectly. I love the semi-Persian design. It slices like a razor and the fit and finish if amazing. ZT is my favorite brand now.
@MrGeerbear6 жыл бұрын
ESB- I really like the improvements. A little leery of the red. How does it look in person? Really like the new pivot and less branding. I love trailing points. Thanks for the early share.
@EpicSnuggleBunny6 жыл бұрын
Looks great in person, much nicer than the 0460 color.
@shaunpearson79055 жыл бұрын
I like it quite subdued; I'd have liked a redish scale on the lock-side, but I love this one.
@nickkazarian33346 жыл бұрын
Great video, thanks!
@mikegoddard93766 жыл бұрын
Nice looking knife - good to see "normal" sized blades being offered for a change too. Getting tired of seeing all these newer models with nice overall designs, only to find out they come with tiny blades. IMO, would have been better with blacked-out pivot hardware, and some thumb-ramp jimping.
@BazonBlades6 жыл бұрын
This will be a good partner for my 0452cf. I always liked this design, but the 460 was too small for me. Thanks for the look.
@abc456f6 жыл бұрын
Baz on Blades Yep. Love my 452cf and this 462 has better steel and nicer looking carbon fiber. I like that Persian style curve too. A little different and more unique.
@Damphair15 жыл бұрын
I know this is an older review but, I did, this past week, pickup their Sprint run version 0462blk and I am loving it!! Here's a funny thing. I almost didn't purchase this knife on the grounds of, it utilizes CPM s35vn steel as opposed to their standard run with higher grade of 20cv steel. This being said, I thought to myself,"are you ever going to utilize the full potential of either steel either way"? The answer is absolutely not. I am a moderate collector but, that being said my desire can sometimes get the better of me. Just earlier today I was somewhat at war with myself to purchase a Benchmade Contego -the Blade Works exclusive with m390-. Someone had one available, in new condition for a relatively inexpensive price. The kicker is, I have actually already owned the black m4 steel tactical model and also two different m390 versions already. All three of which have been sold off. Lol, there is an issue there for sure. I have one more purchase on its way. This being another Sprint run by ZT, the 0452WBW. The white carbon fiber plus a stonewashed black blade of s35vn steel, why yes ma'am!!!!!! Anyways, that's just me carrying on about something I am passionate about as well! You somewhat introduced we to this world of higher quality knives, and I thank you kindly. Have a great day and keep up the good work 👍 Keith...
@bobb.99176 жыл бұрын
Not a fan of that knife style personally...but cuddos to ZT for the tech work...Making a knife that large with that weight class, at that price in 2018, .. is just fantastic!...not to mention the fit and finish. Yeah..the branding on the clip of the 0460 is, in a word "hideous"(to me)...so.... no branding on the clip would be nice, but the new knife is an improvement, as with the blade and the CF. Very good listening on ZT's part. I have a ZT0580 in the mail right now (my 1ZT!..but not for everyone...I know)...and I definitely have an eye on the ZT0095BW. Glad to see that ZT implements customer input...in this transformation, it looks "all good"!
@New2Kendo6 жыл бұрын
Thanks for your help, I bought the ZT0462 instead of the Spyderco Mamba, it's a great knife. I am going to pickup the 0460 as well for an EDC, the 0462 isnt legal in my state to carry (and I always follow stupid laws) and at the price point of the 0460 if it gets wear and tear I don't mind.
@EpicSnuggleBunny6 жыл бұрын
Glad you're happy with it!
@jace18736 жыл бұрын
man awesome.lookimg knife. have the smaller version. can't wait to pick this one up. when does the larger version drop?
@abc456f6 жыл бұрын
j ace187 Just ordered one from Knifecenter, in stock. Bladehq only has preorders.
@tommyd3jr6 жыл бұрын
Love everything about this knife (especially cpm-20cv which is my fav BS) but the Persian-style blade shape.. just not my flavor, bums me out bc i need a new ZT in my life! Thx for the vid bro! Great job
@wittyag4 жыл бұрын
Looks like Count Dooku's knife.
@EpicSnuggleBunny4 жыл бұрын
That it does!
@BParker556 жыл бұрын
Gotta say.. you didn't sound all that excited at all lol
@EpicSnuggleBunny6 жыл бұрын
Recorded the video at midnight, then passed out.
@cyphersuit16 жыл бұрын
You didn't sound too interested in this one yourself. Do you prefer the smaller version? How is the blade shape for EDC tasks? Thanks!
@stevebaar6 жыл бұрын
Well done Bro! Any idea when the 0609 will be here?
@jesser83695 жыл бұрын
LMAO, I look up and I see a silver handled dlc pm2 just like the one in my pocket... Flytanium Aluminum all day :)
@Lonewolfmike5 жыл бұрын
I just got the sprint run version of this with the tan G-10 and BW on the titanium and blade.
@EpicSnuggleBunny5 жыл бұрын
That was a nice sprint
@Lonewolfmike5 жыл бұрын
@@EpicSnuggleBunny They have some still at BladeHQ last I checked and on sale.
@eudaem0n6 жыл бұрын
Nice review. You made a comment that the edge wasn't great and pointed out how the secondary grind rises as you get closer to the choil. Even if the grinds were done correctly, I would expect that area to rise because the primary grind gets thicker closer to the choil.
@EpicSnuggleBunny6 жыл бұрын
True, but the lock side has a consistent secondary bevel whereas the show side does not. Either way, I'm not going to worry about it since it's rather minor.
@booking31366 жыл бұрын
Yes
@mr.davemaeen81366 жыл бұрын
I NEED IT ALREADY
@marrenmiller6 жыл бұрын
They still messed up the sharpening choil, which is sad. That, and the fact that the handle hangs way too far forward over a good portion of the edge, makes me think that sharpening it will be obnoxious.
@kerryrwac6 жыл бұрын
It would be interesting to compare it to the 0452CF . I didn't buy the 0460 because it's the same size as he 0450 and i sold mine . It was to small and the stupid point poked me in the pinky .
@EpicSnuggleBunny6 жыл бұрын
That's a good idea, very similar, but different.
@abc456f6 жыл бұрын
kerryrwac Love my 452cf and the 462 has better steel and nicer looking carbon fiber. Digging the Persian curve. Just ordered one from Knifecenter, $240. Bladehq only had preorders.
@chrisjaskulski86134 жыл бұрын
So hard to believe this is what ZT was doing in 2018... and now they're on to mini slip joints, 0223s and 0022s... their total abandonment of brand identity in such a short time is truly shocking.
@Maliboo746 жыл бұрын
I'll need to bore out that rear barrel for a lanyard hole :)
@ilikeknives77746 жыл бұрын
Love the knife looks and size but it is somewhat difficult for me to flip. It seems that even the slightest pressure any place on the lockbar makes it impossible to flip. I have many flippers that require a hold away from the lockbar but I can’t seem to find a secure grip on this knife without touching either the lockbar itself or the clip which rides on the lockbar. Any hint on how to hold this guy would be appreciated. Love your vids. I think they are the best in the business! I have purchased several knives based on your reviews and have not been disappointed yet.
@EpicSnuggleBunny6 жыл бұрын
I'm doing a live stream tonight, I'll hit this question.
@ilikeknives77746 жыл бұрын
EpicSnuggleBunny thanks, I watched your live stream and your advice was very helpful!
@MrMatthew70006 жыл бұрын
Hey snuggles, I'm about to get the 456 Black Version, can you recommend anything?
@EpicSnuggleBunny6 жыл бұрын
Like what?
@px73556 жыл бұрын
is the 462 the same size as a poluchotky?
@David276534 жыл бұрын
I got 1:) 👍🏼 0462 love it
@EpicSnuggleBunny4 жыл бұрын
Its still awesome 👍🏻
@gopnik99676 жыл бұрын
God I need one
@EpicSnuggleBunny6 жыл бұрын
Do it
@dustinjachim6 жыл бұрын
This will be my first ZT knife!!! Great review
@abc456f6 жыл бұрын
Dustin Jachim Will be my sixth. I think it's a beautiful piece. Love the 452cf Sinkevich design and the 462 has better steel and nicer looking carbon fiber. ZT, Spyderco, WE, and Real Steel are currently my favorite brands.
@busterlee84385 жыл бұрын
I just got it a couple weeks ago. Been slobbering over it for over a year now.
@PkwyDrive136 жыл бұрын
The biggest problem is the stainless screws threading right into the titanium.. And they still did that crap
@EpicSnuggleBunny6 жыл бұрын
I've yet to hear an argument from any engineers about threading stainless steel into titanium.
@gordonstevenson5356 жыл бұрын
Looks like the CTSmart YH11
@mauricedefranca31036 жыл бұрын
Trying to decide between the 462 and the 452. Which one is smaller in hand?
@EpicSnuggleBunny6 жыл бұрын
Don't know exactly what you intend by smaller in hand, but the more neutral grip of the 0452 might make it feel like a smaller/thinner overall profile.
@mauricedefranca31036 жыл бұрын
Apologies, I should have worded it a bit better. Which one feels more comfortable in your hand. I have previously held a 452 and I recall it feeling a little big. I'm struggling to get hold of a 462 to compare.
@EpicSnuggleBunny6 жыл бұрын
The 0462 will also feel quite large in the hand. If you didn't like the 0452, I don't think the 0462 is for you either.
@deandemafiles41624 жыл бұрын
Have you ever had a zt lock fail? Im planning this 0462 to be my first zt so i want it to be perfect. Thanks
@EpicSnuggleBunny4 жыл бұрын
I personally have not.
@deandemafiles41624 жыл бұрын
@@EpicSnuggleBunny thanks
@kpcull6 жыл бұрын
Definitely an improvement, but I still hate all the text on the non show side. Is “Sinkevich Design” necessary?
@EpicSnuggleBunny6 жыл бұрын
No doubt Sinkevich thinks so
@blackadder19666 жыл бұрын
Is it my internet its not your usual quality video resolution?
@tansinjack6 жыл бұрын
I’m gonna buy one
@abc456f6 жыл бұрын
Jack Tansin I just did! Love my 452cf and the 462 has better steel and nicer looking carbon fiber. Sweet Sinkevich design. Well done ZT!
@tansinjack6 жыл бұрын
srg914 I’ve got a 0450CF, this is going to be the next one for sure
@abc456f6 жыл бұрын
Jack Tansin 👍
@captainsewerrat6 жыл бұрын
Can't wait for them to be available over here in europe. *flails*
@NavySooner5 жыл бұрын
I don’t see going away from S35 to much of an upgrade. There really isn’t any difference if so it’s very minimal. I may be a homer since S35 is my favorite steel
@AlexanderSLeBlanc3 жыл бұрын
20 CV is significantly better but only if the heat treat is done right. ZT doesn’t do 20CV justice so yes it is barely any different than their S35VN.
@MegaSpongebob945 жыл бұрын
I love zts but c’mon make one with a finger choil!
@brillijonjunio6 жыл бұрын
zt 0095bw or zt 0462? which is better?
@EpicSnuggleBunny6 жыл бұрын
Personally, 0462
@mikey520344 жыл бұрын
Anyone have the all black version or the tan? I'll buy both!! I've been looking forever. HMU please 🤞🙏🔪
@Wood_Slice6 жыл бұрын
Love the look but not a fan of big curved blades.
@mrmurdochyessss54066 жыл бұрын
I don't like flippers because they require a different - and looser - hand-hold than thumb-stud openers and that can lead to a catastrophic mistake in a dangerous situation.
@EpicSnuggleBunny6 жыл бұрын
In the last 7 years, I've never had a problem, but you should definitely buy what you like.
@coleprivett46515 жыл бұрын
Im doing a payment plan on mine
@dogonmountain64456 жыл бұрын
You didn't discuss ergos I don't think. Where's the balance point?
@EpicSnuggleBunny6 жыл бұрын
It was late, and had to rerecord the video because of a technical issue. The first take had info on the balance and ergos.. alas, the balance is at the first finger, right where it should be, and ergos are good, but some of the other ZT's have better ergos.
@jtucci57115 жыл бұрын
Removal of the far less offensive logo, do you here this MassDroop, manufactures with class selling a $200-$300 knife don't slather their name on the blade in hopes of a future sale with in my case has had just the opposite effect, I won't be buying another Drop knife until they remove your lousy logo from the A or B side of the blade. OK sorry I didn't mean to hijack your video but when you mentioned that ZT removed their logo it got me going, again. Thanks for the video, I was on the fence with this ZT, my first but now I think I will be buying one as Amazon has them for $200 and SMKW has the G10 version for $165 so at those prices I think I will be buying my first ZT, as an Oregonian that is shameful.
@herseyjimp29336 жыл бұрын
360p only?
@ivanb2517ib6 жыл бұрын
Need to cut a bigger sharpening choil
@neroknives18286 жыл бұрын
Ivan Beard doesn’t matter with free hand 💪🏼
@GarryReyom5 жыл бұрын
+$200? Wtf?
@EpicSnuggleBunny5 жыл бұрын
So worth it
@neroknives18286 жыл бұрын
Spyderco high end manufacturing has better fit & finish then zt imo.
@EpicSnuggleBunny6 жыл бұрын
I would disagree, but to each their own.
@neroknives18286 жыл бұрын
EpicSnuggleBunny that’s fine. It’s just my personal experience that zt cannot stand up to the hard use I put on them. I’ve only found 2 so far out of almost all them that can.
@neroknives18286 жыл бұрын
EpicSnuggleBunny imo zt put more time and money into looking good, most people misinterpret that for fit and finish. Where as spyderco put more money In time working on the lock/ blade. Just my opinion from my existence use carrying both, I still like zt, but I wish they would charge more to fix the issues with about 95% if there models. Basically tighten up the tolerances. Good video tho really enjoyed it.
@itsme52796 жыл бұрын
EpicSnuggleBunny 0462 or 0920?
@New2Kendo6 жыл бұрын
I disagree, I have several Spyderco USA and a few ZT knives, and the edge grind on a couple of my Spyderco knives is a little off near the tip and the frame, all of my ZT knives are perfect.