35PSI STOCK N54 Motor Compression TEST & Misfires FIX?

[@Zsword92]

You guys deserve way more subs!!!

[@CrashBandiii]

I have a feeling it's coming, the algorithm just needs to play its part. Always brilliant content

[@edwardruelas3116]

One of the best n54 builders on the platform from cheap to not so cheap. I'm coming from California, United States as well

[@craigy131]

I love how you guys are like, 'it has a new noise but we are just going to send it' 🤣🤣 so happy for you that the miss seems to be sorted. Awesome work!

[@OCOWGTR27]

Smashing out the vids this week boys! Keep up the good work

[@birk1798]

The tick could possibly be a hydraulic lifter, they tend to tick a bit if they need oil pressed through them ... the italian tuneup (15-30 mins @ 3000rpm) usually solves them, until they go completely ... exhaust sound very plausible if it sounds "fluttering" also, hope she holds up at rolls! Have fun guys!

[@Nico_335i_DCT]

Congrats guys! Good luck tonight! Regards, Nico.

[@simonqureshi1988]

Good on you lads because of you im going to spend big money on my 60k e90 n54 2006.big brakes 19t turbos 4inch big bore stainless steel zorst better LSD paint job new wide wheels and tyres jb tune.keep up the good work we are all proud of you good luck tonight i hope you leave them in the dust.

[@Lodestar_]

Super excited to see how this beaut does at rolls!

[@davo705]

Are you doing adaption resets?? Even throttle adaption resets?

[@eightfivezerobraxton5509]

love the what looks to be exhaust smoke coming out from the shifter hole at 14:35. what a beast

[@thisisluka]

I think I can confirm the tick / flutter towards the end was an exhaust leak (at least hopefully). Had mine making a damn near exact sound to that you guys had, from an old dodgy custom exhaust job, and when I got a properly custom built stainless 3" from the turbos back, have not noticed anything since. Either way, good luck at the rolls!

[@igotaction]

You try and smell and listen to everything you can...you just described my only driving experience.

[@dylans4562]

Exactly every n54 owners experience lol. I find myself listening for things more at times then the radio 😂

[@robingroeneveld4169]

Good luck and have fun!

[@devonsmith1995]

If you have the chance I would check you mr timing chain guides and tensioner . The guides are plastic and like everything else plastic on these cars break. And the tensioner can vibrated loose after time. And check your oil filter.

[@javi_335i]

Can’t wait to see them roll races

[@namsu2403]

That shudder almost sounds like mine when it got rod knock. I've had it on two n54 engines now.

[@drivewaybuilt2265]

all the best guys loving the videos 👍✌

[@bretth3224]

Have you reduced the spark plug gaps?

[@brycemaunder5018]

I hate to ask but have you guys done/has it previously been done, the valve cover gasket? I need mine done and the 2nd cyl is constantly misfiring and causing issues because 2nd cyl oil leak on spark is the first sign of valve cover

[@n54lionmilk]

Loving it Ready for Toll race. Let's Go #teamn54 🔥🔥🔥🔥🔥🇯🇲🇯🇲🇯🇲🇯🇲🇯🇲🇯🇲

[@mulletor123]

Pr coils ,2 years nearly I've had them and never missed a beat since. 1000x better than stock.

[@davidstevenson1211]

Did I see smoke come through the shifter at 14:40 lol

[@timwright3394]

Who doesn't love a spontaneous rolls night!!! Into it lads!

[@Joshk326]

Can’t wait to see more track time on all the projects

[@csmitas]

Are these spark plugs 97506? What is the gap you are running (in this video?) I just changed my plugs and am experiencing very similar issue - thanks! Currently running 0.018” gap on mine!

[@marwanhassan6146]

I'm curious since this is pre lci wouldn't it have msd80? if so that could be the issue and you might need to upgrade to msd81. but idk if that was already done or not.

[@carsonwong]

Hey zero to 60 , my 5th gear auto n54 is slipping, currently on a hybrid turbo just around 19psi. What do you recond I need to do to rebuild my trans ? The trans is currently clocking around 160-180k km. Do you think a solenoid kit with get things back to normal ?

[@Saif0412]

If you have XHP, check adaptations, activate line pressure boost under the custom module, this may resolve your clutch slip. Budget on full gearbox service including Mechatronic Sleeves, Seals, Solenoids, oil, pan /filter. If you still get slip after doing all of the above, you will probably need to replace the clutch packs.

[@carsonwong]

@@Saif0412 thanks man , appreciate the info. yea, i have XHP stage 3, its better after i increase the line pressure. but slip still occurs occasionally. will take your trouble shooting sequence to rebuild the gearbox.

[@Saif0412]

Hope that noise isn't anything serious, great to see making progress on Oh Really, guys 👍

[@tighematthew]

Hope you got it sorted. 🤞

[@ZeroTo60Tube]

Fingers crossed alright!! Are you going to euro day?

[@tighematthew]

@@ZeroTo60Tube yeah taking my dads Z3 for show tho.

[@WedgePerformance]

Good luck guys. Wish I could be there.

[@craignoble3442]

What type of psv system ?

[@cornfedboost]

In the beginning all I could focus on was that co2 sticker... hope it goes well guys 😁🤘

[@ZeroTo60Tube]

😂😂

[@43angk]

Any chance you can live stream on FB at Rolls..Goodluck.

[@ben7020]

I've got a theory these N54s are miss happy because the injector floods the spark plug right beside it - and it flames out. A local rich point within the cylinder. I used to make a fair whack of power with a single coil on an RB30ET and leads so why the misfire trouble on this platform with the multiple coil on plug advantage? I've noticed using a custom MHD map leaner seems to run cleaner. Anyone else notice this ?

[@justjoshn5468]

Exhaust gasket or heat shield forshizzle

[@milanuddin]

With both of you wearing sunnys and rockin beards you look like twins.

[@jimmymccain4580]

Are they brothers?

[@seanissomething]

If this car can run properly at roll racing, it's going to upset A LOT of people! Good luck boys!

[@ametti000]

The misfire was an ignition issue. No surprise.

[@craigbeamer9611]

How many times I've been out in my BMW doing exact thing....wtf is that new noise. Oh it's gone .. lol. C'mon rolls!!

[@Meatcleaver101]

Question .. What software do you use to test and diag your runs? aka on your phone

[@ZeroTo60Tube]

The mhd app and dongle

[@Meatcleaver101]

@@ZeroTo60Tube Thank you guys.. appreciate the reply very much.. 10/10.. good lucky on the roll racing fella's/Team (Praying for no misfires)

[@ZeroTo60Tube]

Should also confirm we use dragy for acceleration times

[@johnMpower]

With "original plugs" you are refering the plugs that came with this car when you bought or the original plugs of N54 (bosch)? Good luck for tonight!!

[@TheMultiDouche]

Runs a non standard set of plugs. He means the set of plugs that were in the car when they bought it.

[@johnMpower]

@@TheMultiDouche ya...i believe that.

[@davidthomas7424]

Maybe a thicker grade oil 10w 40 may help ? 🤔 i use 5w 40 in UK

[@dylans4562]

I use 5w40 liquid Molly, less oil consumption/ burning from the heat

[@edwardruelas3116]

Check the gap on those spark plugs

[@blrn54]

Sweet Send it legends!

[@mrg2039]

Fingers crossed 🤞

[@br4d101]

SILZKBR8D8S this is the ngk spark plugs I use in mine, 2 stage colder, good luck for roll racing! I changed my mates clutch few weeks ago n when he drove off the car started knocking/ticking removed the oil filter and it had compressed for some reason, new oil and filter n problem was sorted!

[@powercel800]

I hate to say it fellas, a knock at constant revs/light load that changes with oil pressure - probably a big end bearing. Fingers crossed that it's something simple though

[@auszman]

I hope its not rod knock boys... joking... I hope... I still dream about spun Rod Bearings,,, every time you lay on it smoke through the centre console. Does it have a burning rubber smell? 14.43 acceleration shuts ashtray :)

[@gster109]

Did it eat a bearing ? Next episode will be spicyyyy

[@ianmclaughlin3976]

what software do you use on your phone to access to the cars specs

[@ZeroTo60Tube]

The mhd app and dongle

[@ianmclaughlin3976]

@@ZeroTo60Tube Many thanks If you need any computer support Please let me know

[@BUTTERSOCRAZY]

ROLL CAGE TIME, I need to start recording my efforts lol

[@wgreen340]

That fill look ah lil high.

[@brendenns3926]

I f*#£ing love these vids!!!!

[@khalid8419]

Told u it was the water pump buddy,, 😃

[@HassanEido1]

Send it, if it breaks, mend it

[@1993kawasaki]

JUST SEND IT

[@ZeroTo60Tube]

STILL GUNNA SEND IT

[@kakengatoi23]

Yes lessgoo

[@twinscrolled]

Exhaust leak for sure.

[@gster109]

my guyyyy

[@gregcowart8229]

120

[@jamestehuna5915]

I miss owning a BMW

[@dylans4562]

There love hate relationships 🙃

[@jamestehuna5915]

@@dylans4562 😂 yes it is most definitely

[@acz177]

Coolant looks like chocky milk