DIY hidden in-cab drawers **YOU CAN’T BUY** for only $100 in materials! Patent pending!

Don’t clutter your pickup bed with a huge toolbox. Hide all your tools inside the cab under your rear seat. You don’t use that space anyway so take advantage of it!
Due to popular request, link to the slam latches: MxEol Marine Slam Latch Black Deck Hatch Door Pull Round Non-Locking Pair www.amazon.com/dp/B07CH3N76R/...

[@ZeroToAwesome]

Don’t want to build one? Now you can buy one! kzbin.info/www/bejne/fIDHhWWmfLmDZ6c

[@Thedoors432]

I have one, the Deezee is extremely cheaply made. Pretty disappointing how cheap it is put together, especially for a $500 item

[@KThach.]

"Tools that fire projectiles." lmao that is a great explanation without getting demonetized.

[@Joe-cu4hi]

What an ingenious invention. We took an 80 day road trip and it was such a pain to take everything off the seat to get to the storage under the seat? Thank you Sssooo much for sharing

[@cruzs1234567]

Watched most this before remembering I drive a single cab

[@corwinchristensen260]

One important item that really should be considered is to secure the toolbox (really any heavy item) so it doesn't become a potential source of injury in an accident or quick maneuver. An emergency stop has the potential for this loaded toolbox to slide into the feet of the rear passengers.

[@kobayashimaru8114]

Good point. It can be secured to the seat mounts with a cable or chain. I went the simple route of just making a 3 sided wall to keep things tucked under the seats and simply bungee corded the contraption to the seat mounts.

[@showcasecharlie11]

I had my doubts with that thin wood, but I was actually impressed with the end result.

[@bruceseverson8941]

same

[@frankcoffey]

One thing you could add is tiny feet (strips) on the bottom that fit into the slots in the floor mat to prevent a forward slide.

[@davidfox5362]

Love this. Dude, this is a Shark Tank moment if ever there was one.

[@Robert8455]

Great idea and good explanation on the build. One more thing to consider adding might be some straps to help secure the box in the event of a crash. I think one or two straps attached on the backside would do the trick and might also slow down someone trying to steal a locked version of the box. The latch idea was sweet!

[@AmplifyDIY]

This is great! I really wish the under seat area under in my '19 ranger had space for something like this. Great work!

[@BrantherAndFriends]

My right ear loved the intro

[@StudioDaVeed]

Possible alternative to carpet in the drawers are the rubber kitchen shelf mats. I have them in my motor home and those things are like magnets! Keeps stuff from shifting and rattling....

[@itzanopinion]

My right ear enjoyed the audio..but my left ear is now jealous...luckily about 1/2 way through, both ears were happy! :)

[@brandong2142]

Man, you sound like Jim Halpert. The more I listen, the more I’m convinced you must be related. Very cool box idea.

[@oneofthosepeople2101]

It’s about time someone is utilizing all the wasted space in vehicles. I hope to see your products on the shelf one day👍

[@raymondwhipple1180]

There might be one thing that I would add. A couple of heavy duty velcro strips holding the box to the mat. That way you wouldn't have to worry about it moving forward if you had to make a hard stop.

[@marchearn9058]

Beautiful! Can't wait to build one for my 2020 F-150. Didn't realize there was so much space under those seats. Thanks!

[@josephtempleton4930]

This is great! I've been looking for a bed-toolbox replacement since I want to go to a tonneau cover. This is perfect. Thanks, man!

[@cisdix]

I just built this for my F250 over the weekend. I made it a touch wider and longer. Fricken awesome! Man, you should make a patent!

[@SuperSpecialty]

Do you know how much it costs for a patent? 20 years ago it was $50,000!

[@josephschoonover5654]

@@SuperSpecialty It's a lot less than than. U.S. PTO has a listing of fees www.uspto.gov/learning-and-resources/fees-and-payment/uspto-fee-schedule#Patent%20Fees I'm not a great builder... and I don't have a workshop... and I could really use one of those for my truck!

[@NandoSubia]

Do you have dimensions/plans for this?

[@man.i.literally.failed6772]

this is the kind of stuff car manufactures should be doing

[@LynxStarAuto]

Ford would probably sell you this drawer set as an accessory for 800.00 😒

[@ToeKneeBee725]

Great job making use of the space in the cab. Very complete and thorough build. Thank you for sharing with us! I look forward to building mine.

[@SouthEast619r]

Right on time my friend...... I was just looking for drawer system for my Rebel. I have a project for next weekend. Thx

[@ryanhack5]

Wow that is the best under seat storage I've ever seen for our trucks! I'd honestly order one from you tonight!!

[@alozano443]

I have been looking for this solution for years!!!! Thank you!

[@brendonallen8239]

I love my WeatherTech under seat storage that I put in my F-150. However, this is SWEET with the slide out feature, especially considering you don't have to lift the seat up to access your stuff. Thank you for the video!!

[@milescorp6237]

Thanks for sharing this great idea and design. I made one for my F150 using slightly thicker wood so my drawers are a bit smaller but still big enough to be useful.

[@rejeanpaquet4375]

Good project, good job using that dead space. You had me when you threw that plastic roll. I like the click of the latch.

[@danielhurd8299]

Fantastic build! I’ve been wanting to do something like this for my 2011 Silverado. Thanks for the ideas

[@ericpinnar]

That’s just awesome! I’ve written comments to KZbin videos maybe twice in the last many years, but I felt compelled to write my 3rd to this one. Fantastic job! I have been looking for the solution to the same problem, and you nailed. Hopefully it comes back to you with the reward you deserve for being such an innovator! Simply amazing. Great job!!

[@ZeroToAwesome]

Thanks! It’s going into production soon! kzbin.info/www/bejne/g3SnlXR7i6mCf5Y

[@truckpilotnate2972]

Are you sure you’re 16? You sound like you e got the maturity of a 35 year old. 😂. Congratulations! You’ll never forget this day. Welcome to the club!!

[@CampDeclan]

What a smart and skilled man. Way to go! Wish you were my neighbor.

[@WiringSolutionsOKC]

I have a second Gen Raptor and want that exact box in metal with locking features for a black rifle on the driver side. You really need to be manufacturing these, as there is nothing on the market (that I can find) that is as nice. Great work by the way!

[@Rick_Sanchez_C137_]

Matt Could easily be designed to have one on each side that pulls out with a shoulder holster & pistol and an AR with spare mags..... In these times of riots, this would be a great money maker..... I hate Ford, but I might be tempted to buy a new truck if I could get that double drawer system....

[@WiringSolutionsOKC]

Rick Sanchez C137 - agreed. I found a lot of room behind my rear seat which is great for a black rifle and Amazon sells a magazine well lock with aircraft cable tether, so I feel fairly secure, but these drawers would be better and quicker to deploy.

[@bear_82]

Nicely done; might consider trying it with bottom-mount, rather than side-mount, drawer slides

[@mikepoint4983]

In a world of the aftermarket I haven’t seen this kind of storage system anywhere , what a great idea ! . I feel ya better throw a patent on it soon . Cheers

[@Hansengineering]

The Tundra has like 15 aftermarket versions of this (but they don't go back to the back wall of the truck, because of seatbelt mounts).

[@mrGoldpowder]

check out Du ha systems.. been around for years

[@harrynut3044]

I love your Truck, its beautiful. That color is outstanding. Excellent job on the Tool Box. I have a 2013 Crewcab and might be doing this very soon.

[@dandropsgears4614]

I detail cars for a living, and today I seen someone build something like this! He custom fabricated everything specifically for his truck! I told him how cool that was, and I need one! Now fast forward about 10 hours. I think I need to start making one! Also, great video! Will be subscribing to see more content!

[@munizda]

That was great. I can't believe Ford couldn't figure that out.

[@johnfitzgerald5158]

Makes me appreciate my Ram that already has under seat storage plus 2 storage bins in the floor under the mat from the factory. I have tons of recovery gear and tools in there. Nice work though. Where there's a will, there's a way. I'm sure by now you know how valuable that space is. My only other suggestion would be to come up with a way to put longer objects in there (over 2 ft). Perhaps 2 different size drawers, or leave the rear of the drawer and partition shorter and level to allow a a triangular gap where something longer could be placed in there sticking over into the next compartment. I stow a crow bar, breaker bar and a monster adjustable wrench under there (all stuff to work on suspension if needed).

[@davidmark866]

Well damn, that’s more useful than most of the $1000 toolboxes I’ve seen in the back of trucks.

[@enolwlfe]

SWEET!!!!!👍 my next project is that. As a carpenter & a commercial equipment tech, I got this, plus just about half the materials already yeeeehaww

[@GamerDadKinz]

What a great design! I am inspired.

[@joshuaranger1631]

You did a hell of a job on that toolbox! I’ll be making one for mine very soon! Thanks for the how to video

[@zimmsene-enosa8247]

Great concept, amazing ideas, and AWESOME finish product. Appreciate y’all sharing 🤙🏽

[@tinkerscorner54]

At 17:37, a tip for the hole saw to avoid the peeling of the laminate (seen on the inside). Start drilling your hole and only get it started 1/4 to 1/2 way through. Then, drill from the other side. It makes for a much cleaner edge on the hole. Nice idea for the slider box. Thanks for posting.

[@patriciagantz377]

The best option is Walmart ! I bought a hard plastic rifle case with foam guts from Walmart for - $10 ! All my tools , a chain , a new strap , ball hitch , and other stuff fit in and nothing rattles ! I had to trim some of the foam so the new strap would let it close !

[@artramirez3506]

Noice! I need to make a mini version for the passenger side of my SCAB rear seat.

[@councilquirks6601]

GREAT VIDEO AND A GREAT IDEA.....I BUILT A FEW SIMULAR BOXES WITH DRAWERS FOR MY S-10 BLAZERS SEVERAL YEARS AGO.....BUT I DID NOT KNOW ABOUT THE LATCHES THAT YOU USED.....KEEP THE GOOD VIDEOS COMING.....

[@mrrustygray]

I used really sturdy plastic planter boxes that were just the right length. I added a simple backer piece to the seat rails and then some disconnects to the planter boxes. It is just as durable as those $100 plastic boxes. I often lift my seats and need to remove the boxes due to an older dog. These are really nice and a great video for 4 door trucks. I have the Ex cab.

[@ZeroToAwesome]

Great solution!

[@giltrujillo213]

Nice. I was more then impressed ! Great design !

[@mtnflyer9859]

Nice work sir! Looks great.

[@darkflamethrower]

Amazing. Exactly what I need! Thank you for creating

[@jacobpaul6814]

“I have this baby problem.” I hear you there man 😮‍💨

[@voskovniodvich4080]

This could also work with bent aluminum and a rivet gun if somebody really wanted it to be metal. I really like this, I hadn't thought of that space as a storage space myself. Genius

[@mmonroeapbi]

Awesome build! You've inspired me to go for it

[@vaughnmerritt4750]

Totally Awesome Dude!

[@TurkeyDart]

This is fantastic. Excellent video

[@willclemons6846]

Very cool idea, I would put some protective piece on the front panel like a rubber or hard plastic. That way when your vacuuming or if someone sits back there. It doesent get scuffed up.

[@user-tu4jj6gs4p]

Awesome project! Thanks, and Gig Em!

[@blancosilverado9795]

I'm actually going to look into making this for my truck.

[@martinbrotherton5153]

Get a subwoofer speaker box , and carry on from there ... nice idea

[@rellik1010]

Great idea. You should try making a single drawer version with locks. It would be great for hunters. You should patent it and sell the idea to the big 3 truck companies. 👍

[@oldschooltunervw]

Genius, I will be making one of these eventually

[@clarkkent4991]

I like that you built it yourself. Nothing beats ability.

[@FranksDIY]

Looks great. I don't have a baby seat but when traveling sometimes we have luggage and to get to bottom is a pain. Great idea

[@rossclarkoutdoors64]

Clever idea very clean look 👌 great job!!!!

[@yellowdogparty]

Nice job! I might have to make this for my Raptor. The car seats have stolen my space too! 😂

[@joecard3]

Great idea!!! And fits perfectly. 👍

[@frankiem749]

I just bought a aluminum locking box and bolted it under my back seat. Cheaper and stronger than all the plastic "storage" open top options.

[@yushui2806]

Fantastic idea!

[@justanotheraviator2357]

When you were talking about the bed box, I couldn't get the GET DECKED advertisement it's my head!

[@robertuffman3041]

i love this idea. i think i'm going to use 7/16 osb for the box and some gutters for drawers. ty for this idea.

[@philthyphil3324]

"I have this baby problem" 🤣🤣🤣🤣 I feel you bro, I feel you. Seriously though, great idea, and nicely done! 👍

[@al52269]

Great video. Thanks for sharing. New subscriber here from Philadelphia PA

[@faithpeace8683]

I just got my first truck, but getting groceries was a nightmare. And I deff thought of this, but wasn't sure how to execute it. I was thinking pulling apart an old dresser and installing it im my truck. This is excellent 👌

[@elijahclark6093]

"Baby problem" you ain't kidding man. The problems get even bigger as they get older. Trust me lol. But we do love em.

[@ericliddle7556]

Very cool idea. I use the Milwaukee packout and it fits well. Was going to use a company that makes drawers for the bed, but that could get in the way of drywall/plywood sheets. Definitely going to explore this idea some.

[@Rg.laborde1]

I would like one as well once you figure out how to secure it to the floor or metal brace under the seat. Very cool! Great idea!

[@The_printer_guy]

my friedn secured on to the metal brace just by adding belts around it and then use some screws to atach the belts it semms good for DIY, he side slide he use some dor stopers on 2side tape :D

[@haroldcarter618]

You a e a genius with excellent skills . I hope the patent goes through for you .

[@alibata24]

Great idea and video!! I’ve got the same problem with that same car seat in mine (can’t get to the storage easily) May have to do this in my Raptor. Liked and subscribed!!

[@ezequieldelgado1328]

Watching this video ! Definitely made me subscribe.. creative and simple at the same time.

[@windycitydan22]

Very clean looking set up good job

[@Sly_Wolf_1]

Great job, love your truck and oh man the colour 😍, wish we had that truck here in the uk

[@mfuchs2004]

Awesome project! One safety point for folks who will have passengers not in carseats: consider running tie-down straps to hold it in place during emergency stops. 20 pounds of stuff in a 20 pound box can easily break legs. We had a local child fatally injured by a 5 pound plastic speaker in a collision a few years back. Flew off the package shelf and crushed her skull.

[@AngloLover]

Awesome design bro, definitely would purchase this.

[@No_nonsense302]

Very nicely done!

[@clarkgriswold2480]

Very cool. Great job.

[@parihynes9381]

Awesome job!

[@jameela7899]

Very nice work! Looks great

[@Matt-yv8ye]

Thanks for the video! I have a 97 short bed f150, with a tool box so I have no space for anymore tool storage in the bed. My seats unfortunately fold down and not up, but! This gave me plenty of Ideas🤘🏼🤘🏼

[@jacksonmagriplis6617]

Awesome idea mate, well done 👍🏻

[@barrymurphy3554]

Great work looks fantastic Thanks for sharing Cheers

[@1D10CRACY]

Had something very similar on my truck when I bought it. It was all metal, Havis product I believe. The truck use to be a tow truck. I ended up removing mine because I hull stuff in the back with the seat folded up all the time. But if one left their seats down all the time I could see it being very useful!

[@greggb3079]

Looks pretty damn nice, there my friend. Very neat, clean, and professional. Listen to your mother... Hahaha! Great video, Thank you

[@lorenmeyer5290]

AWESOME idea thanks! Also love the next video! Another good idea!

[@archangel20031]

At your local home goods store they have these expanded/perforated foam sheets like drawer liners but used for keeping rugs from sliding on hard wood floors. They make perfect tool drawer liners and come in HUGE sheets for a lot less than those little drawer liners.

[@jgilbertg5719]

Can you show me what you mean? I’m interested in what you are describing

[@coilsweeper6391]

Awesome cheers mate, I am making one of these, rugged yet cheap. 👍👌🙏

[@samuelmcardle6135]

My right ear loved this video

[@jesuscruz507]

Great job, great idea, thank you for shearing,

[@MrBiggHead22]

This is seriously bad ass! I just might have a new project on my hands

[@Red69Bu11]

Came Upon Your Channel by chance. Became a sub because of your side comments! LOOKS GREAT

[@nd6415]

You my friend are a genius 👌🏻