Zinc 2.0 Build Guide

[@tactiti0n]

Something to consider when doing the magnet sanding is that they're made of a toxic material that should under no circumstances be inhaled or ingested. Please take care

[@FrontlineFoamBlasters]

Newest build guide available here: kzbin.info/www/bejne/lYWylqqYaLirfZo

[@rpmrunner]

I had to sand my frame and slide for around an hour because my frame was warped a little, but I was impatient and didnt wanna wait. (1 hour of sanding>waiting overnight to print the frame again) I also sand down all my mags, and the magwell too a little bit, I start with 80 for about one minute then, 5 seconds of 120, and 220. Love this gun, wish I had your tweaked files when I printed mine a week ago, but man I cant stop shooting this thing, such a blast. Also, I like the crescent wrench shaped hammer you got there haha.

[@thedude7923]

Where are the files to print it from?

[@jhonnydagamer7738]

dumbahh@@thedude7923

[@jonlatimer274]

I use a wooden dowel for removing the barrel. works really good to get some friction inside, and not scratching it up.

[@OZTutoh]

Awesome idea, thanks for posting it. I suppose even a wooden chopstick could get it out if you wrapped enough tape around one end.

[@officiallyjk420]

I was too impatient to wait for the video release so I started building my Zinc last night! I'll need to reassemble the plunger because I forgot the o ring and reversed the smooth rod's direction. If only I had this video 24 hours ago 😂

[@morris3321]

The zink 2.0 is the best !

[@sojibro4811]

I've never had one of these frontline foam blasters but they are so cool I might get one

[@DJ.Apocalypto]

Their caliburns in my opinion are superb quality.

[@TheRealMisterJ]

Technically these aren't really "frontline foam" blasters most were designed by someone else.. They just print them and either sell the parts, hardware, or put it all together for you..

[@sojibro4811]

@@TheRealMisterJ oh ok

[@soft_bread7611]

any were i can find the parts list? cant find a clear exact parts list for the hardware

[@kevinlampron7580]

Any plans to release your STL files on this one? Was just about to print this one.

[@ghostnba2k193]

How long would it take to come to Australia. And do you need a 3d printer

[@chikentendie7918]

do i need to buy this or can i just print it

[@limbf_ob]

does the Zinc 2.0 printed parts kit some with the springs?

[@limbf_ob]

this was a dumb question, i just figured out the diy kit comes with hardware and printed parts. oops

[@acidix_games]

Man, I want to build this so bad, but the spring is too strong for my tastes and the shipping costs to my country are crazy high, like 100 dollars! Ah well, maybe some day.

[@JB-uj8mz]

Changed out the stiffer spring for the lighter one and now the pistol won’t catch/cock. What will fix this issue?

[@averagencdenjoyer2224]

How do I take the magnets and circle thing out of the break, my brother is printing a new one for me and the old one is broken

[@rickyneeter69]

Someone got information about all springs used? I want to buy them third party

[@roggo__7750]

Are You Ever Going To Be Selling The Hummingbird Blaster?

[@TheRealMisterJ]

Damn out of the 8 blasters I built this was the biggest pain. Finally finished tho

[@Long_John_Silver]

Where do you ship from

[@HamyKadachi]

what hardware is needed

[@worldpeaceplz3333]

I received it last week (7/21/22) with a cracked slide and I can't get in contact with Frontline Foam. Their website service form is not working. They are not returning my emails. Why is there no phone number for them? The pistol is no good with a cracked slide. I'm about to cancel payment.

[@FrontlineFoamBlasters]

Email [e-mail] We’re in England for Foam Fest now, but should be replying in the next day or two.

[@worldpeaceplz3333]

@@FrontlineFoamBlasters I'm on Mars and your customer service is still terrible! The worst experience I had buying a toy gun. You're still wasting a customer's valuable time making me reply your ridiculous reply..................

[@mapleaf816]

When I try to prime it does not catch and just goes back to unprimed. Any suggestions for trouble shooting?

[@VirginiaRican]

Make sure the catch is operating smoothly. Make sure the threaded rod is all the way inserted into the thumbscrew. After that, you may need to back out the threaded insert a quarter of a turn or so.

[@MrJlee93]

@@VirginiaRican I changed out the preinstalled spring for the lighter one. didn't quite work as I have no idea what you are describing

[@viciousviolet3783]

When buying the 3D printed parts from you are they already sanded and drilled out? Also would it be ok to get it to Australia or would customs take it?

[@FrontlineFoamBlasters]

Yes, we post-process all the prints before shipping. However, some light sanding/drilling might be required for the build. The Zinc 2.0 build goes together pretty easily, though.

[@FrontlineFoamBlasters]

We haven't had an issue sending kits through Australia customs! We ship there all the time. We do rely on you to know your local laws, though.

[@viciousviolet3783]

@@FrontlineFoamBlasters cool thank you 😊

[@3low232]

@@FrontlineFoamBlasters I at least think where I live in Queensland, they are pretty chill about gel blaster replicas so i wouldn't see a problem. (Hopefully)

[@thatcarguyryan8948]

I was putting the redirect on and the tube just snapped

[@kaiguy2521]

I can’t find the hardware kit

[@morris3321]

Have you checked the frontline foam website?

[@Yo_Hahn]

I have nearly everything at home from the needed parts, the only missing thing is the "CNC plunger core". Why hes using such a uniqe part?

[@FrontlineFoamBlasters]

There’s a lot of repeated force on the catch face and the o-ring in the middle makes a seal against the guide rod and CNC core. Shoot me an email if you need one: [e-mail]

[@Yo_Hahn]

@@FrontlineFoamBlasters Thank you for the offer, im from Germany, the tax and delivery costs would be a bit high for a small part like this. I think i found something similar looking.

[@ralphd204]

Do you guys ship to Australia?

[@FrontlineFoamBlasters]

Yup!

[@ralphd204]

awesome! Just placed an order.

[@TrustMe8ro]

@@ralphd204 Did you get it in?

[@ralphd204]

@@TrustMe8ro I ordered twice, the first one was fully assembled and was seized by customs. The second one is a kit (un assembled) and made it through.

[@TrustMe8ro]

@@ralphd204 What a-holes..... Un-assembled is the way to go. How are you liking it? Thanks for getting back to me.

[@VirginiaRican]

I finally got mine all together and there's a mystery air leak somewhere. The darts won't fire.

[@FrontlineFoamBlasters]

Are you missing any o-rings?

[@grahamturner2640]

Lol for having 3 intro attempts. 🤣

[@PokePhil1]

Make it cheaper all the stuff u need to make it is,less that 50

[@roggo__7750]

2nd

[@midnightson710]

1st