Zinsco Electric Panel - Lancaster CA Home Inspection

Zinsco Electrical Panel can be problematic, a good home inspector will point them out to you! Electrical portions of a Home Inspection are an important part of the inspection.

[@williamgrissom9022]

Few concerns with corrosion in the Mojave Desert. There have been problems with many electrical panels until ~2000.

[@SantosVince]

Thanks for the video. I don't see many of these in my area but I did come across one yesterday. As soon as I saw the red and blue over-current devices I knew what it was. While it appeared to be in good condition I also recommend evaluation. If it were in my own home I would replace it.

[@calebfleckenstein133]

Lancaster baby! Hometown LET’S GO

[@proscontract5679]

I always recommend for the panel to be replaced for the safety of the sellers and buyers. Its the breakers that are defective.

[@JosephANagyJr]

I've come across quite a bit of information about Zinsco panels and the one common denominator from all the electricians I've spoken to is to replace them or not work on them because they are so unsafe.

[@ask-mw5hk]

I have no luck finding a Magnetrip Zinsco single pole 20A breaker this has a screw on two screws points on top and bottom

[@heroknaderi]

My dad has one of these panels in his shop the breakers look like fpe it seems FPE and Zinsco breakers are interchangeable

[@davidalexander3599]

zinsco will not trip a breaker if you have a short

[@LeggeMediaProduction]

Great video. Could you explain a bit more on how Zinsco's can be problematic? (Aside from the lack of stops on the cover - the 2 wire / 3 wire problem seemed to an untrained eye more a function of a bad initial electrician) One other problem, probably due to scarcity, the replacement breakers cost about 3 time the price of a standard breaker. What type of cost is someone looking out to replace the whole box and what is the best replacement?

[@Grumpyskater]

I have this type of panel in our home and I want to replace it but it’s flushed to the drywall.