Zippo Lighter Restoration & Making a Wooden Case for it 🔥

[@DeividasGedgaudas]

Why do I feel that the Insert was changed to something new mid-sandblasting. The side pitting/being bent disappeared, as well as the insert is from January 2010, while the case is 1932-1989. 3:51 - Pitting visible, back side is bent inwards, 3:59 - Insert is swapped to a new one. Apart from that - end result is insane, as this was more of a wood/epoxy project, rather than a true restoration, that ain't much. Enjoyed the video still

[@CoolAgainRestoration]

I've already discussed this with others who have commented. due to the rust, the insert looked flat, and when the surface was sandblasted, the shapes began to show. the rust was not deep and the surface had no pits. Indeed, I removed the insert while blasting to better clean the inside with a small brush. then I straightened the board. I didn't show it in the video, because I would have made the video too long and it wasn't a very complex job. I've reviewed that part a few dozen times and you certainly have every reason to believe that the insert has been changed. but I assure you it was not so. Indeed, the insert is newer than the case, but that's how I bought the lighter. I bought it from a beach boy, most likely it was found on the beach near the Black Sea, Constanta, the city where I live. Cheers and glad you liked at the end 👍🏻

[@DeividasGedgaudas]

@@CoolAgainRestoration Thank you for such an indepth reply

[@hardly_harlie]

@@DeividasGedgaudas the insert may have been changed out by the same person who changed out the wick to a non-genuine wick. That would explain the date discrepancy.

[@CoolAgainRestoration]

It is possible 🤷🏻‍♂️

[@lucabuzz2678]

@@CoolAgainRestoration esti genial omule!

[@nah9080]

I really appreciate that it's kept in its original brass case and just given a new added look with the beautiful wood-resin bit. At least if you want to go back to beautiful, shiny brass, you just have to gingerly take jt out.

[@CoolAgainRestoration]

True. That was the idea from the first. But for this reason I was afraid to make a case because I didn’t knew how will be the results. My luck that I made the case perfectly fitting for the lighter. Not too big,not to small. Like you said,you can take out when you want 🤩

[@florianpeter7045]

I like how you picked up the old rusty brown and blue cues for the new case

[@CoolAgainRestoration]

Glad you liked it Florian 😊

[@beltfed4624]

Although I'm not a smoker, I'd gladly add that to my display case of beautiful oddities. Incredible restoration, the end result is gorgeous! 👍🏻

[@CoolAgainRestoration]

Thanks a lot and glad you liked it 😊👍🏻

[@ffturbo]

I also dont smoke but have got 3 zippos. More like a hobby honestly. Small jobs and easy to maintain

[@Bikertrons]

I smoke and vape (mostly vape now but was fully a smoker) and have a nice white 2021 zippo :)

[@nathanwhiting5475]

I mean.. lighters do have quite a few uses other than lighting cigarettes lol.

[@SampsfaN]

Zippos are good for camping etc as well. I don't smoke but have a rolling stone lips one that I absolutely adore lol

[@cielo_ciel_]

I especially appreciate that the wood resin housing somewhat resembles the natural brass oxidisation colours, as I find the texture and pattern of the exterior of the zippo pre restoration very charming.

[@beverlycollins4283]

Excellent work. The case you made is beyond clever. However, I want to comment on how incredibly clean your work areas are as well as your hands and fingernails. For me it makes your videos more enjoyable because of the appearance of professionalism. Very nice.

[@CoolAgainRestoration]

Thank you very much Collins! Glad you like what I do. Yes,I like to clean my workshop and to be clean myself. I think is OCD 😅 thanks a lot again and be safe 🤗

[@serenity6415]

I agree. I'm so detail-oriented, it's soothing to watch such fastidiousness and precision.

[@trooper11c]

Yes! It looks very neat and organized. Do you have a video showing your shop layout and all the machines you use?

[@Sol-os5pk]

Clean fingernails is honestly not very important.

[@serenity6415]

Not important maybe, but appreciated. I can't help but notice details, and, hands are one of my weaknesses so, it's nice when they're well-groomed. His hands are beautiful. I keep forgetting to watch the tools..

[@sophiav4962]

That looks so good, I’m a sucker for wood and resin things.

[@CoolAgainRestoration]

I like the outcome too 😍 thanks Sophia 😊

[@robertovillagran5364]

I read a comment of yours saying that you spent almost a month on this restoration, it absolutely shows! What an incredible job, an incredible video. All of the camerawork, all of the set up, your craft and care are some of the finest I’ve ever seen on KZbin! Your video feels intimate, yet no music, no voice, simply you and your project. This video was phenomenal, thank you very much for allowing us to see an artist at work. I was captivated from beginning to end, thank you!

[@CoolAgainRestoration]

Glad to read these kind words and glad you liked it Roberto 😊🤗 cheers

[@stacbond3362]

Спасибо автору видео за хорошую работу,люблю когда востанавливают старые вещи,вторая жизнь для зажигалки Zippo

[@MagicMadBullet1985]

I love the way that at 6:29 the zippo logo is completely gone on the bottom of the case but you somehow "restored" it later

[@idiotic_dude]

i hope you know thats the cap of the zippo case my man

[@LifeOnHoth]

@@idiotic_dude :) Unless the cap is bigger than the bottom, the bottom of the case has no logo on it at this time stamp. Neither does the lid. The Zippo logo and related is gone under the bottom part of the case, and there is no "solid brass" on any of it either when it comes out of the glass beads. It most definitely looks like another case. However, just because the guy has chosen to use another case doesn't make the video less interesting. The case may have been restored, but not for this lighter. :)

[@drdrivg1836]

@@LifeOnHoth you are seeing the other side of the lid.. the 'SOLID BRASS' is written to the right of the hinge on the lid. and this frame shows the other side..

[@CodyKatastrophic]

@@LifeOnHothOR, it’s because this video, like 90% of these videos, is fake. Sorry bro

[@chrisclark2138]

Wow, incredible. the time and patience going into this is nothing short of phenomenal. Great content!

[@CoolAgainRestoration]

Thank you very much Chris

[@VietQuoc86]

Mmp

[@bloodrayne2645]

One of the most creative Zippo lighters I've ever seen, looks so beautiful Good job brother 👌

[@CoolAgainRestoration]

Thank you very much bro 😎

[@kotadawndragon]

This turned out beautifully! I love the wood and resin case on it. I'm glad you chose to add some blue back to it, since parts of the patina on the brass were a lovely color.

[@CoolAgainRestoration]

Thanks a lot Kota and glad you liked it so much 😊🤗

[@James_Edward59]

I love when things stay all original like how you used all original or oem Zippo parts when replacing them. That was a great restore!

[@CoolAgainRestoration]

Thank you very much James 😊glad you liked it

[@ainttoosara]

i love how the cover you made for it mimicked the colouring of the original patina, and ode to what once was!

[@CoolAgainRestoration]

Thanks a lot and glad you understood the project 👍

[@PieceOfGraffiti]

Many many working hours to restore something you can buy from a market but you restore it because you can, huge respect!

[@CoolAgainRestoration]

Thank you very much 😊

[@thomasneal9291]

Well done restoration. not too much metal loss, re-added nickel plating, properly buffed. even got a proper specific restoration kit. you've reached pinnacle restoration skill. go on and teach!

[@CoolAgainRestoration]

😅😅 thanks man. What is pinnacle skills?

[@pthsawas]

@@CoolAgainRestoration pinnacle means peak/ the top. Basically he means you are amazing at what you do. Sorry for the late reply.

[@CoolAgainRestoration]

Oh, thank you very much Orieller 😊 now I understand what he wanted to say 👌

[@CAlise2024]

That is gorgeous. I love wood and resin projects! The lighter is beautiful on its own, but the case offers protection and another level of beauty.

[@CoolAgainRestoration]

Thanks Clark and glad you liked it 😊

[@The42Joker]

Great work! I thought I was going to hate it with the wood and epoxy case because the brass looked so wonderful. My mind was changed, and I loved the outcome!

[@CoolAgainRestoration]

Glad to hear that man. I was afraid how people will interact with this outcome ..because is different and people never seen that before

[@venkatanarasimhamkadambari242]

Indeed a Brilliant Work and Personal Commitment and Passion Personified

[@CoolAgainRestoration]

Thank you very much 😊

[@juancosta775]

Very aesthetically pleasing, and good job for you reading comments and responding!

[@CoolAgainRestoration]

Thanks Juan 😊

[@BuddWolf]

Fantastic job!❤️ I collect Zippo lighters, so this is special to me. Thanks for the video post and best of luck to you and your family 🍀❤️

[@CoolAgainRestoration]

Thank you very much for the wishes 🤗🤗 be safe you too and your family

[@JG-fi9ub]

Really love zippo lighters. That brass case was in amazing condition for its age after you cleaned it up. Good call on adding the wood case since the brass zippos really tarnish fast. Very nice job.

[@tyson145]

I love people like you who take something that would otherwise be considered trash, and bring it back to life! we live in such a throw away society. It's sad. Keep on making these amazing videos! :D

[@CoolAgainRestoration]

Glad you liked it Tyson 😊 thank you very much

[@JU7DE357]

Its FAKE as hell dont belive it

[@PapaKratos]

I have no idea why this was so satisfying to watch. Can't believe I went through the whole video with 0 skips. Good job man!!

[@CoolAgainRestoration]

Thank you very much man 😊

[@drvonschwartz]

I appreciate the honesty in the title. Something omitted from many other youtube restoration and repair channels.

[@CoolAgainRestoration]

Thanks Josh 😊

[@Rev-D1963]

The restoration was superb, and the wood/resin case is amazing! Fantastic job on the restoration and case build, a pleasure to watch. Thanks so much for sharing this with us. Be well, stay safe and God bless. Rev. D.

[@CoolAgainRestoration]

Thank you very much my friend and I really appreciate your support every time 😊 stay safe you too

[@marianavasile1387]

The restoration was pretty nice but the process of making that case was awesome😍😍😍 never seen something like that before 🤩 congrats my dear 😘😘

[@JoshD4PREZ]

Absolutely brilliant, glad this popped up in recommended videos and I got to discover your channel. I’m impressed with everything especially the case, what an awesome restoration 👍👍

[@CoolAgainRestoration]

Thank you very much and glad you liked it 😊👍🏻

[@JU7DE357]

No its FAKE

[@R3belliousKn1ght]

​@@JU7DE357 no u

[@dennisgannon]

This is the smartest Zippo repair I have ever seen. He used the Zippo repair products, that was smart. No one else on KZbin has done that, (at least the dozens I have viewed).

[@CoolAgainRestoration]

Thank you very much Dennis and glad you liked it so much 😊

[@garywimer2071]

I can not believe how awesome this turned out! Thanks again

[@CoolAgainRestoration]

Glad you liked it Gary 👍

[@lovejcdc]

That was freakin awesome! My late father was a long time collector of zippo lighters. I think he would have really liked it. Great job

[@CoolAgainRestoration]

Glad to hear that man and thank you very much 😊

[@randysmith3828]

That turned out incredible!!! Nice job on the wood and resin case, that is an awesome look. Can’t wait to see the next one.

[@CoolAgainRestoration]

Glad you liked it Randy 😊 I try my best every time 😇

[@radiantfalinks]

beautiful! it’s clear that you put a lot of care into your restorations ❤️

[@CoolAgainRestoration]

I try my best every time 😇

[@bingefreak1]

That was satisfying to watch, right up there with the finest time piece restorations

[@CoolAgainRestoration]

Thanks a lot and glad you enjoyed so much 😊

[@LadyLeigh]

That was a superb restoration. I have never smoked but would keep that as a decorative art piece! Beautiful!

[@CoolAgainRestoration]

Thanks a lot and glad you enjoyed so much 😊

[@yamasail]

That old case was beautiful. I don't know if I could've brought myself to restore it and probably would've ended up just doing the insert.

[@syilandel]

same here, I would have tried everything to keep the old case intact it was so unique.

[@CoolAgainRestoration]

Too many people said that. If I will find another zippo like that, I will seal the patina . This is an idea for the next project 😊

[@RestoredChannel]

Wow. You really took this to a new level! Wonderful restoration and I really like how you made the case👌

[@CoolAgainRestoration]

Thanks a lot my Swedish friend 👍🏻

[@kirilla.3529]

Really impressed by your job, I've seen many of zippo restorations, but yours just so satisfying. Thanks a lot 🔥

[@CoolAgainRestoration]

Thanks a lot too Kirill and glad you liked it . Hope many peoples find this the best zippo restoration 😅👍🏻

[@alextv5836]

Очень классная и качественная работа,а на сколько же она красива!! В последнее время мне нравиться смотреть видео про реставрацию и именно ваши видео мне нравиться больше всего!

[@CoolAgainRestoration]

Thanks a lot and glad to hear that 😊 cheers

[@alexglaras5090]

The patina on the shell was so beautiful I would've hesitated to restore it. Great job!

[@CoolAgainRestoration]

Thanks Alex 😊

[@HandsonRestoring]

Really nice job and great idea with the case ! Great filming and editing too. Thanks for sharing !

[@CoolAgainRestoration]

Thanks man 👍🏻

[@eraj1001]

Amazing job! I’ve collected and restored many zippo’s since I was 14 years old but never with the skill and attention to detail you showcased. Do you work for a museum or did you buy all these tools yourself?

[@CoolAgainRestoration]

Glad you liked it eraj 😊 I buy them for myself

[@NapierNimbus]

Very impressive work, lighter restoration and making the case. Am split between wanting to see and admire the lovely restored lighter or keeping it in the case, think a display rota system required 🙂 Having the right tools helps so much, & I hope you can find a use for the Zippo restoration tools on other projects.

[@CoolAgainRestoration]

Thank you very much man! That’s why I made the case perfectly fitting. If someone want the lighter as normal ,he can take out from the case very easily 😎

[@mikew2689]

cant believe what i have seen, this is unreal, a one man factory🌻

[@CoolAgainRestoration]

Glad you liked it Mike 😊

[@vijaynaik7739]

No words, it's fabulous , the case and overall the finishing...fantastic. Sir, waiting for your more videos to enjoy Aaaah what a feeling.

[@CoolAgainRestoration]

Thanks a lot and glad you enjoyed 😊 hope you check the entire channel because the lighter video is an old one , I made a lot of videos from them . Cheers and wish you all the best

[@CoolAgainRestoration]

I will reply to all messages as usual. If you have questions about this restoration or opinions, feel free to write in the comments. Enjoy the video ,Thanks and Cheers !!

[@AlvaroLucard]

My friend, David, the restoration and customization has always been beautiful. Do you often restore many ZIPPO? New equipment? A big hug. 🍻🍻🍻

[@amoichipmunk]

Is there anything you cannot transform into art? seriously about me because you are good beyond measure, Wood Metal Electronics, I bow. why in wood and resin the case?

[@rickb3225]

Threw in a little F bomb there 🤭😁! Great work 👍! I'm restoring a bar top for my sister in law and she wants me to make a mosaic with bottle caps and corks, and then cover it with epoxy resin. Only issue is I've never worked with epoxy resin before 😬 and I'm extremely nervous about screwing it up! Any tips?

[@restaurandocoisasvelhas]

Very good friend. Hugs from Brazil.

[@CoolAgainRestoration]

Hi Rick ! You should check the thickness for the casting resin. For example mines,you can turn only 10 mm layer. After some tutorials video on KZbin, I bet you will become a pro. Is nothing too hard when working with resin. Just be careful with the bubbles. When mix the resin,you need to vacuum the air from epoxy

[@serenity6415]

Excellent quality job! You definitely belong among the KZbin masters. I really enjoy your editing style as well. It's a pace and format that I find very agreeable and engaging. Efficient. I have problems concentrating lately but I'm just rolling right along with it. Smoooooooth. (LOL! That's the first time I've seen a restorer swear. Extra points for that. Too funny.)

[@CoolAgainRestoration]

Glad to read this kind words 🤗 thank you very much for your support Tina 😊

[@MrSongbird]

How do you decide what needs sandblasting and what goes in the cyclone? Awesome restoration, by the way. The case looks sick, but I think I prefer the lighter as is ;)

[@CoolAgainRestoration]

That’s why I made the case perfectly fitting. The lighter can be take out easily and wear like a normal lighter. I thought that the air pressure will hit the brass case and will damage the material. That’s how I decided to use the cyclone 👍🏻

[@tiberiubear6282]

@@CoolAgainRestoration i always thought its that situation where "if it fits, it goes in the little tumbler", just because working with the sandblaster on small materials can be tiresome and not very comfortable

[@TheHexCube]

Glass bead lapidary is awesome! I've never come across that before. Thank you! 👍

[@theplacesigo4169]

Wow. I was pretty much captivated by how cool this whole project was

[@CoolAgainRestoration]

Thanks and glad you liked it 😊

[@ArturMordgan]

5:21 THE LEAN

[@AmmonomiC4T]

Six from little nightmares bought her lighter from zippo😂😂

[@illegalopinions4082]

I used to have a Zippo when I used to smoke. I had a brushed steel one for every day stuff and a matte black one with a green/gold dragon on it for nights out. This video takes me back to those days. The smell of the liquid, the striking of the flint, and that crisp metallic sound of the Zippo opening and closing. I still don't want to smoke, but damn. I now miss my Zippos again. I haven't thought about them in years. Not using them was one of the first steps that allowed me to quit.

[@CoolAgainRestoration]

Well done decision 👌

[@illegalopinions4082]

@@CoolAgainRestoration ❤

[@codysmith4611]

I was so happy when he said he was going to do more with this project and started the case

[@sucio-]

This is like saying i used 20,000 dollars worth of equipment to buy groceries… i mean i guess technically i did but did I really?

[@darrellmurdock6880]

That Oddity oil made it really pop out 👍😎 nice casing and restoration piece

[@CoolAgainRestoration]

Thanks a lot and glad you like it 😊

[@Anmobgoccult20]

YEYEYEYYYYHHHHH, AGANE, briliant work and video, full bravo and respect from old BG.

[@RosleezanShah-sl4jn]

The finished project is totally amazing

[@CoolAgainRestoration]

Thanks a lot and glad you enjoyed 😊

[@ordinarychannel3314]

This is a great job. I like the whole zippo restoration process. It is very good with the electrolysis of rust removal, as well as the process of nickel plating and restoring the old shine.A wooden box is a nice idea. Great job and thanks for this video.

[@CoolAgainRestoration]

Thanks a lot and glad you enjoyed 😊

[@ordinarychannel3314]

You're welcome.😃

[@Grzanka_]

Imagine this guy couldn't repair something.🤯 This is amazing!!!🤩

[@CoolAgainRestoration]

Thank you very much Snow Doge 😊

[@Whitebrowpriest]

Your work is second to none. Superb job!

[@CoolAgainRestoration]

Thanks again 😊

[@Jelly_andJam]

I love that I got my husband a Zippo for Christmas this year

[@CoolAgainRestoration]

Nice present 🎁 he need to be proud of you 😊

[@Raoul28057]

Crazy how you respond to everyone this deserves a sub and how patient and clean you are, keep up the good work!!!

[@CoolAgainRestoration]

Thank you very much man 😊

[@sigurdursine7763]

That reveal of the case after it came out of the "Cyclone" was amazing.

[@CoolAgainRestoration]

Glad you liked it 😊

[@maryeroman4338]

I cannot tell you how many times I watched my dad replace wick, flint, and batting, adding lighter fluid in his Zippo which I still have (wonder of wonders!)

[@CoolAgainRestoration]

Awesome memories 😊

[@SnaggleWumpus]

I've never seen or done anything like this in my life but I watched this whole thing and thoroughly enjoyed every second of it

[@CoolAgainRestoration]

Thank you very much John 😊

[@williamjohnson6109]

I can’t believe I actually just watched 20mins of this, amazing work!!!

[@CoolAgainRestoration]

Thank you very much William 😊

[@Republic3D]

Nice work dude. Makes me want to find my old Zippos and refill them and put them on display.

[@CoolAgainRestoration]

Thanks mate 😊

[@dante8625]

Absolutely amazing! Couldn’t stop watching it haha

[@CoolAgainRestoration]

Thanks 😊

[@funtoytoyschannel5676]

Absolutely brilliant, glad this popped up in recommended videos

[@CoolAgainRestoration]

Thanks buddy

[@alibina678]

The most Neat and amazing job Ive ever seen on Zippo , great job mate

[@CoolAgainRestoration]

Thank you very much Ali 😊 appreciated

[@jenzihumari7425]

You are crazy, I wish I had your skill, patience, and art. Great work.

[@CoolAgainRestoration]

Thanks a lot Jenzi 😊 glad you enjoyed

[@hotbread1004]

The case is gorgeous, personally I like the color of brass when it's polished, gives a gold feeling, which is my favorite color

[@Timmymtd]

It’s honestly such a job well done that it’s unnerving. Bravo

[@CoolAgainRestoration]

Thanks Tim 😊

[@WaspandUnicorn]

Omg thank you for showing us the napkin after using the solvent to get any remaining debris off. I dunno why but it was satisfying to know how much you got off. Great work! My husband and I love your videos!

[@CoolAgainRestoration]

These kind of messages make my day . Thank you very much, I really appreciate 🤗

[@Andres38283]

Amigo es increíble lo que haces! Se nota que te encanta! Sigue con tu sueño bro! Llegaras lejos

[@CoolAgainRestoration]

Thanks a lot 😊

[@TheHexCube]

Immaculately professional. 👍

[@tijnmens7389]

Absolutely killed it!

[@CoolAgainRestoration]

Thanks 😊

[@runedrewsen]

I loved the old bras case, would have loved to see it restore but keeping the old worn look with the "rusty" patina :)

[@CoolAgainRestoration]

Next lighter project definitely will be like that 😊👍🏻

[@TubeArmadillo]

I was about to say exactly the same thing. The patina was quite beatiful. The wood-epoxy case on the other hand is ... well ... let's just say not an improvement.

[@scoobydont5299]

I didn’t realise that Frank Zippo also made lighters. He certainly was the Father of Invention✌️

[@mph3394]

From Montreal Quebec THANX !!! Love yer videos with all the ASMR and all yer knowledge

[@CoolAgainRestoration]

Thanks and glad you liked it 😊

[@hach1590]

Great imagination on the Zippo case too, and love the video close-ups!

[@CoolAgainRestoration]

Thank you very much 😊

[@maria.luisa.garcia2169]

OMG ! Un estuche para la fosforera ! Que bonita ! ❤

[@danielaragall9780]

I have a zippo of the 50s and i love it, i dont smoke, the zippo was of the unckle of my grandpa, but now i know they took much better care

[@cenkyildir9847]

Lighter restoration is good, but lighter box is perfect. 👏👏👏👏

[@CoolAgainRestoration]

Thank you very much Cenk 😊

[@aldocarriglio9282]

Eccellente è molto meticoloso questo lavoro di restauro impreziosito dal porta accendino in legno e resina ,bravissimo

[@jaypee6644]

I really aprecciate that you in someway maintaned the original colors of the zippo I was like "please add the original color to the epoxy" and boom! It was so satisfactory. Nice job and keep going.

[@CoolAgainRestoration]

Glad you liked it Jay 😊

[@FranciscoSanchez-wq1oq]

Pretty fricking amazing keep on keeping on!♥️

[@jenn976]

Wow, Koa wood, great touch. That made me look up to see if you were in Hawaii. This model of Zippo lighter brings back such memories of my father - wonderful to see it lovingly restored. (the sound of it opening and closing is etched into my brain.) And the close-ups of the process are done so well and appreciated. Thank you for expertly restoring another discarded item. Subscribed.

[@CoolAgainRestoration]

Thanks a lot for being here , subscribing and liking my content 😊 I read all other comments you made here , thanks a lot for them 😊

[@channelsixtysix066]

What a beautiful piece you restored and created. Marvellous work.

[@CoolAgainRestoration]

Glad you liked it man 😊

[@JaDem148]

First off, the restoration of the lighter itself is incredible. Secondly , that wooden/epoxy case for the brass case, just incase, is mind blowing! Does it float now?

[@CoolAgainRestoration]

Yes, it’s floating in case of 😀thanks a lot and glad you enjoyed 😊

[@axellure9168]

Потрясающая работа бро 💯💯💯

[@EnriqueOchoaMaldonado-uc8kl]

Woooow !! Ese encendedor de como llegó todo oxidado, ha como quedó, mis respetos , para el artesano..!! Lo dejaste como salido de la fábrica Zippo, pero todavía mucho mejor con ese estuche de madera y esa resina epóxica de color verde, me encantó..!! Que bonito taller tienes, además tienes mucha herramienta para la limpieza, restauración y reparación de encendedores, eres igual a los joyeros, o ha los que reparan y restauran relojes, que tienen mucha herramienta..!! Aqu en México no se dónde venden toda esa herramienta, hay cosas que si se consiguen, pero muchas cosas no, y allá en Estados Unidos venden todo .!! Me entretuve viendo este excelente y muy interesante documental..!! Excelente video, muy bien hecho..!!

[@CoolAgainRestoration]

Thanks a lot mate and glad you enjoyed so much 😊 many cheers 🍻

[@robnalu6436]

Wow! Loved everything about this upload! Mahalo! Aloha~~ from Hawaii~~ 🤙🤙

[@CoolAgainRestoration]

Aloha my friend 👌

[@Sukai420]

Oh my godness ! Not only the work done is fantastic and the quality of the video itself perfect, I also saw that you reply to every single comments (and pretty fast) ! O.O You are so motivated and this is so inspiring even though I am in a complete different era (Piano, Games, etc...), I am slowly healing from my anxiety disorders since my diagnosis (2-3 years ago + Nervous breakdown followed by returned anxiety in march 2022) as well as my overthinking as well as increasing my positivity, self-positivity and what comes with it in order to turn this negative into positive and begin to be productive when I would have healed from that, (as a 15 years old). I also need to work on my substance abuse (Marijuana) later on. This made me randomly think of that and the work I have to do on myself in a positive way, just because of how dedicated, motivated and hard-working you are ! Thank you so much for your work and that right there, is a piece of art, I cannot believe how well was this restoration done !. I hope that everything goes well in your life, thank you for this content once again and this reminder that it gave me, may love and peace be upon you for the rest of your life, have an amazing day (:❤

[@CoolAgainRestoration]

Thank you very much for these kind words. I feel sad to read about that but you should know one thing. Every one has problems, and every problem begin in our brain . Probably sometimes we need just a reset in all we do it and start doing positive things and things who keep us calm . I hope you be well very soon. Thanks for enjoying my content, I try my best . Have a nice day too mate

[@inwoodkingz88]

Beautiful work. That’s a piece to be proud of!!

[@CoolAgainRestoration]

Glad you liked it Adolfo 😊

[@hobbes2555]

Finally an honest restoration title!

[@CoolAgainRestoration]

😇 thanks

[@shakimjohsnon3497]

That sand blasting was so satisfying to watch!

[@CoolAgainRestoration]

Glad you liked it 👍🏻

[@shakimjohsnon3497]

@@CoolAgainRestoration Hell yeah man! Got a sub from me! This shits awesome!

[@gifpngjpg]

Just ordered a fisrt zippo and I'm already feeling so hyped that here I am watching a restoration video. Goog job though!

[@CoolAgainRestoration]

Thanks a lot , glad you liked it