ZS190 190cc engine swap for Little Ducati in vlog 043

  Рет қаралды 11,285

Jonathan Cunanan

Jonathan Cunanan

Күн бұрын

Пікірлер: 48
@shanemandoh
@shanemandoh 2 жыл бұрын
I like that you actually reply with a link! Thanks for the good info.
@josephsaucedo8691
@josephsaucedo8691 3 жыл бұрын
The shift star mod and check the d comp on the engine is also good might want to look in too this
@josephsaucedo8691
@josephsaucedo8691 3 жыл бұрын
You need just the coil and oil cooler on the l90 kit and if you want to see the gear indicator you need to take the wire off the 125 the 190 only shows when your not in gear if you care to see them.👍👌✌️
@jonathancunanan
@jonathancunanan 3 жыл бұрын
yep in my later vlogs i got the oil cooler setup. i was considering swapping over the 125 gear indicator harness, but it would only show 1 thru 4, plus i still need to get an impact screwdriver to get it out. it's on the to-do list.
@josephsaucedo8691
@josephsaucedo8691 3 жыл бұрын
@@jonathancunanan harbor freight has the screw driver for cheap 👍
@SeanLeonDrumz
@SeanLeonDrumz 8 ай бұрын
Does the spedo cluster still work? Best video ive seen on this swap thank you so much for sharing!
@juni2337
@juni2337 Ай бұрын
hello, I'm on the same setup and I'm stuck at this level. could you send me the colors that go together please?
@warrenpeas
@warrenpeas Жыл бұрын
did you ever find a shorter gear shifter than fits without having to be modified?
@josephsaucedo8691
@josephsaucedo8691 3 жыл бұрын
The original motor can be upgraded to a 141cc with a bore kit makes a good back up. we're did the muffler come from? the coil with the 190 need to be used. How is the bike working out?👍👌✌️💯
@jonathancunanan
@jonathancunanan 3 жыл бұрын
Been running really good. I have not changed much except facing the carb towards the back, front mounting the oil cooler and running a quieter muffler. Everything else stayed the same. No issues so far. Very pleased with the results, however it makes me want a regular size bike like a CBR250 or an R3 now.
@josephsaucedo8691
@josephsaucedo8691 3 жыл бұрын
@@jonathancunanan r3 would be sweet it has the most power in that class. I would recommend the 600cc class just because I have seen the 190cc race the cbr and beat it 🤔 so you might be disappointed. They say it's just as fast the 300cc have just a little more top end Wich is strange you would think its way fast but it's really not.👍👌✌️💯
@jonathancunanan
@jonathancunanan 3 жыл бұрын
I figured the bikes weight with the 190cc would feel similar to a cbr250 which made me look to bigger bikes like the R3 or even the duke 390 but the ones I see are about 4K, where cbr250’s are sold for much less.
@josephsaucedo8691
@josephsaucedo8691 3 жыл бұрын
@@jonathancunanan you ever think about the ninja clone you can build it using all Honda or most grom parts the body is the only part ninja style they made it to except all Honda parts it also works with Daytona 190/212 but it's a full size bike for the same price as the grom clones just a cheap idea for a full size bike
@jonathancunanan
@jonathancunanan 3 жыл бұрын
@@josephsaucedo8691 I would want my next bike, if I ever get it, to be fuel injected.
@argen809
@argen809 3 жыл бұрын
How’s the ride have you gotten to take it out yet it’s a huge difference from the 125 to the 190
@jonathancunanan
@jonathancunanan 3 жыл бұрын
i haven't yet unfortunately. my kit didnt come with a air filter so i am waiting on that to be delivered. i still have not figured out a way to install the oil cooler. i ordered a clocking flange to face the carb backward to make room up front for the oil cooler, but that won't be done until maybe next week or so. i will do a test ride with the air filter as is and see how it compares, hopefully this weekend. i will report back and let you know.
@argen809
@argen809 3 жыл бұрын
@@jonathancunanan if you need any tips let me know I have the same name on fb I have a 190 swapped Vader so it’s a little different but any question I’ll be happy to help
@jonathancunanan
@jonathancunanan 3 жыл бұрын
I’ll PM you.
@jonathancunanan
@jonathancunanan 3 жыл бұрын
Update : took it out yesterday and it does feel a lot different. Not sure if it’s all in my mind but it was a lot of torque.
@argen809
@argen809 3 жыл бұрын
@@jonathancunanan yea they make a lot of torque not so much in the high Rpms but they definitely pull all the way up to 10k
@javierestrada6227
@javierestrada6227 3 жыл бұрын
Where is the link to buy ona engine like that one
@jonathancunanan
@jonathancunanan 3 жыл бұрын
I bought it off Facebook group member from the ZS190 swap shop group.
@sdy5001
@sdy5001 3 жыл бұрын
Sick, bro! It's looking sharp! I see that the forum was helpful for info, and that the swap shop looked out with some parts, but where did you order the actual engine from? Is there a US retailer/distributor? Thanks for the video and I would be super pumped if you had any insight on what motor kit you got from where and what you're experience was like!
@jonathancunanan
@jonathancunanan 3 жыл бұрын
Sorry for the late reply but I got it from David bullock at the time. Hope it helps if you still haven’t got one yet.
@neworleansbikelifechannel
@neworleansbikelifechannel 5 ай бұрын
​@@jonathancunanan can you send me a link I can buy that exhaust from
@littler0ck
@littler0ck 3 жыл бұрын
Where’d u order the exhaust from?
@jonathancunanan
@jonathancunanan 3 жыл бұрын
Got mine from David bullock from the zs190 swap shop group
@josephsaucedo8691
@josephsaucedo8691 3 жыл бұрын
Cut the black and put green in place and you good tape black wire off.👍👌✌️💯
@jonathancunanan
@jonathancunanan 3 жыл бұрын
yep. got the wiring all figured it out.
@wolfdesikan1766
@wolfdesikan1766 3 жыл бұрын
You got a link for that fuel cutoff valve?
@jonathancunanan
@jonathancunanan 3 жыл бұрын
Chanoc Inline Fuel Shut Off Valve Petcock Switch for 50cc 70cc 90cc 110cc 125cc ATV Dirt Bike Go Kart www.amazon.com/dp/B07LBPTF6B/ref=cm_sw_r_cp_apip_AvGfC66qMrCKO
@wolfdesikan1766
@wolfdesikan1766 3 жыл бұрын
@@jonathancunanan Thank ya sir!
@Resist_7
@Resist_7 3 жыл бұрын
We're did you buy the bike at?
@jonathancunanan
@jonathancunanan 3 жыл бұрын
i bought it off a friend when it had 5 miles haha, he actually bought it new from Kronik Racing in Simi Valley, CA and stored at my house but eventually got a ktm 390 before he even rode it again.
@Resist_7
@Resist_7 3 жыл бұрын
@@jonathancunanan Can you ride a passenger?
@jonathancunanan
@jonathancunanan 3 жыл бұрын
@@Resist_7 I think you are able to if you remove the seat cowl plastic and if you are both small riders but I wouldn’t recommend it. It’s a small bike as it is.
2 ай бұрын
WTF is that "proper starter procedure"‽ What dres it do?
@vladimirmoroz1688
@vladimirmoroz1688 2 жыл бұрын
Где воздушный фильтр
@josephsaucedo8691
@josephsaucedo8691 3 жыл бұрын
A nibbi clutch cable off amazon fits the 190cc
@jonathancunanan
@jonathancunanan 3 жыл бұрын
i was able to reuse the stock clutch cable.
@josephsaucedo8691
@josephsaucedo8691 3 жыл бұрын
@@jonathancunanan just make sure it's not going to burn the clutch up and is in gauging right.👌✌️
@jovanvillanueva2122
@jovanvillanueva2122 2 жыл бұрын
Need help with the wiring you Explained it too fast lol
Zongshen 190cc Engine Unboxing
9:48
eastcoastish
Рет қаралды 20 М.
ZS212 SWAP DIY
13:30
BrunerTuner
Рет қаралды 18 М.
Мясо вегана? 🧐 @Whatthefshow
01:01
История одного вокалиста
Рет қаралды 7 МЛН
Yammie Noob Gave Me A Blown Up Turbocharged Hayabusa (Unfixable)
30:04
The Bearded Mechanic
Рет қаралды 1,6 МЛН
Motorcycle Engine Swap - 2022 XPRO Vader Grom Clone ZS190 Upgrade
14:38
How to Make a Real Diamond - (Not Clickbait)
8:51
JerryRigEverything
Рет қаралды 5 МЛН
Mini V12 On The Dyno - (How Much HP Do These Mini Engines Make?)
16:31
ZS190 190cc engine swap for Little Ducati first ride in vlog 044
26:31
Jonathan Cunanan
Рет қаралды 2 М.
I Bought a 40’ Container of motorcycles from Japan
58:55
Bikes and Beards
Рет қаралды 11 МЛН
Daytona 190 vs Zongshen 190 : Side by Side Comparison
7:26
Thumpstar
Рет қаралды 46 М.
How to Build a Competitive Kart Racing Engine (Stock Appearing)
43:35
Something About Making
Рет қаралды 3 МЛН
Z190 & z212 Zongshen setting valve clearances
5:56
ooracingtube
Рет қаралды 29 М.