Zuma 125 signal light change.

Turn signal change on a Zuma 125

[@HalfDeadHero]

Thanks dude 👍🏼

[@jacknjill3000]

Nice and thanks for the video and I wasn’t sure if I had to take off the rear brake light bc I only saw the tiny screw holding the signal light. Yeah and after getting the my used zuma scooter I parked on the sidewalk with just the side stand and it fell over bc the scooter was fading down on a slight hill. So don’t do that but I was surprised the replacement tail light was only $15 and I couldn’t find a used OEM one on eBay. So o went to Partszilla (sp).

[@jacknjill3000]

You should mention taking the signal light off, the one with the alloy nut to put a wrench on the back of the nut. Otherwise it’s going to turn forever. Yup the connection thing is hard as hell to remove!

[@jacknjill3000]

Oh and after spending 2 hours, the hardest part was getting the screws off the taillight and mine were worn out for tying for about an hour. The reason for that was you can’t hail the light and hold the back screw and it’s very narrow by the back screw and with a wrench hold in the back screw while screwing the front one and make sure they are aligned. Actually it was still impossible so you have to take the fender off and the only way to get the twilight on and get to the back of the screw that will just turn and turn and get you nowhere. I wish yuo pointed that out and without taking the rear fender off, you’re not going to fix your tail light.

[@mel0cel026]

Thank you!!!!!

[@mykeharris8651]

glad to help

[@mykeharris8651]

Thank you for watching.