Zund Overview

[@doasyouwill]

I have been operating a Zund G3 L-3200 full time at a graphics shop for 2-1/2 years. I can honestly say I absolutely love my job and wouldn't trade it for anything els other than to work for Zund! Finally I have found my passion!

[@whothisss4whothisss47]

What are some ideas you’ve gained in terms of creating ur own designs to sell?

[@Armor_Heart]

how do you set the z-offset for a cutter that is 35mm long and has a diameter of 4mm? without dividing the machine into two halves?😂🤟

[@highvis_supply]

you have saved the lives of many EPFL architecture students with this machine.

[@ZundTube]

Thank you @Gundamrules301. That´s great to hear such a feedback - makes us proud ;-) /tna

[@davedave7904]

gotta love that Z46 blade

[@doasyouwill]

I seriously would drop everything and move to Franklin, WI to work for you guys! Phenomenal Router!

[@ardianr6110]

im from indonesia . . im operator machine zund since 7 year ago..i loved zund ..amazing machine . .

[@MAMAwHolandii]

i working also with zund in Netherland :-)

[@BangOrcs69]

wew ada orang indo.. tolong bikin tuttorial tentang zund dong bro gw pen tau cara masang piso zund trus nyeting register nya.. gw mau di pindahin jadi oprator zund .. blm ada pengalaman -_-

[@ZundTube]

Hi Hendra. What kind of tutorial are you looking for?

[@BangOrcs69]

its all about zund Special for beginners like me I work in a printing company in indonesia .. i work in finishing and within a week boss i change my job to become oprator zund .. and i do not know to use zund at all!

[@BangOrcs69]

please teach me like registering camera replace the knife set the depth

[@reclaimamerica9527]

I'm trying to find a video that teaches you to operate the zund. They have them at my job and I'd like to get ahead by learning to use the computer part of the machine

[@ZundTube]

Hi Red Pilled Goy, maybe you can get in touch with our local service team via [e-mail] or call them directly [phone] - they will support you with all the information you are looking for.

[@roberthrescan6142]

I work on Kongsber XP, but this machine... WOW! I WANT IT!!!

[@ZundTube]

No problem ;-) Just fill out this form and we will provide you with more information: www.zund.com/en/g3-contactform Have a great time!

[@Dowg-man]

You have to try it out. It’s another level!

[@preciousjemz]

Can I ask a question. In a fabric cutting; how to make it faster a bit.

[@ZundTube]

Hi. It depends on what machine configuration you are using. It would be much easier if you send your request to [e-mail] directly incl. the necessary details like machine type, tool, module, etc. So they can give you the correct answer.

[@edjones220]

I've worked with a zund for years love the machine, but I'm sure I'm not using it to its full capacity. I've started a job and have finally got to use the G3. but I need help finding my way around the software as it's different to my old one. are there any tutorials on line?

[@ZundTube]

Hi Ed Jones. Have you already seen our tutorial area in our KZbin channel? I'm sure you will find any answer you are looking for. If not, don't hesitate to contact us again. Good luck, tna Link: kzbin.info/aero/PLlisgYauQkmlrdzHJnnayV9PPdD0180ZB

[@l.8979]

Does the Laserpointer positioning also work if only the Laserpointer is built in and not the ICC camera module?

[@ZundTube]

Hi. You have two options to chose. First laserpointer incl. the camera module and secondly the laserpointer without camera. To answer your question: yes, the laserpointer positioning works also without the ICC camera.

[@doasyouwill]

I operating a Zund G3 L-3200 full time at graphics shop. I can honestly say ever since

[@josairbraz]

A dream!!! I love too this machine!

[@vishnusadat2843]

Zund cutting machine chalane ki month celery kitani hai

[@rickvanmaanen8478]

is there a movie on how to change the flatbelt inside the DRT tool?

[@ZundTube]

Hi Rick. At the moment we don't have a video regarding your request. But if you have a specific question in this case you can get in touch with our service department directly via service (at) zund.com - hope that works for you.

[@georgetanton4535]

Rick van Maanen bgb

[@ZundTube]

What you maybe hear is a special regulation algorithm which makes the drive system much more rigid and precise.

[@kushagrakumar1992]

Can it cut polycarbonate sheets?

[@ZundTube]

Hi Kushagra. It depends on the thickness of the polycarbonate. Up to 1 mm should be no problem. If it's more than 1 mm you've to use a router.

[@karlaagui2688]

How can I cutting with point reference ?

[@ZundTube]

Hi Karla. Setting the reference point on a Zund G3/S3: Move with the keys the laser pointer to the place you want to start. Push the F8 Key +3 (define reference point) You can also set the reference point from the ZCC software in the Interactive mode. For more detailed Information please contact your local service partner. Hope we've understood your question correctly.

[@busaj383]

Wonder if these are difficult to service...

[@ZundTube]

Absolutely not.

[@busaj383]

@@ZundTube Well that is good to know 🙂 Thank you

[@carloquilop1746]

How much is the machine? Do you have outlets in asia?

[@ZundTube]

Hi Carlo Quilop. Please get in touch with one of these offices: Zund Asia, Ltd. Room 911, 9/F. Eastern Harbour Centre 28 Hoi Chak Street Hongkong T [phone] [e-mail] Zund Asia (Bangkok) Ltd. 120 Silom Road Kasemkij Building 5th Floor Room #570 Suriyawongse Bangrak Bangkok 10500 Thailand T [phone] [e-mail] Hope that information is helpful for you. Best regards, /tna

[@karla2O11]

how much would one of these tables cost?

[@ZundTube]

+GEORGE SANDS Hi George. If you can give me your e-mail address i will provide you with the information you´re looking for. Thanks in advance. /tna

[@myoung48281]

My friend just got one of these and cutting coroplast the corners are terrible, any ideas?

[@karla2O11]

If your friend paid over 100g for a table maybe he should ring customer service rather than get his m8 to go on you tube.

[@myoung48281]

GEORGE SANDS he did, i'm trying to find a quick fix.

[@myoung48281]

GEORGE SANDS And your comment doesn't help at all , does it?

[@cnccarving]

cool i just asked my friend from jinan next time they are in hingkong sure checking the belt conveyor.. like to have one on my machine

[@万海民]

how much is it？

[@ZundTube]

It depends on the configuration of the machine. If you need more information, please send a request to [e-mail] - *tna

[@pepsico815]

Why does the Zund always make groaning type noises?

[@jigdow]

Great video.

[@Fonkmobinc]

LOVE THIS FICKIN TABLE PUTS KONGSBERGE TO SHAME

[@Garod55]

what a fuuuuu****** i love this machine .... this is my new wife