Car Mechanics

Пікірлер

@wams467 11 күн бұрын

It’s the same mount for Focus 2004 1.6 tdci 109hp with 5 speed manual transmision?

@1312acabb 21 күн бұрын

Are bad mount making noise while driving?

@marcvanbuijten2999 22 күн бұрын

What was the reason that you decided to replace the mount ? Did the worn mount make extra noise ?

@ClintonWright-m5r Ай бұрын

Brilliant straight forward video .Thank you

@2209beata Ай бұрын

After three years of waiting for the engine to be rebuilt i was finally able to drive it last week, just over 200kms driven and i love it ❤ Good future investment

@CarMechanicsTV 28 күн бұрын

Nice work!

@darrencollins1578 Ай бұрын

Nice, but they don't have any cup holders

@goodknight5861 Ай бұрын

Interesting..

@HHHSOHS Ай бұрын

How do we change the fuel filter on one of these can't find a replacement online

@vincepadmos Ай бұрын

Great video!!🎉

@jayceoldacre9702 2 ай бұрын

Never done it before but after watching this im gonna try lol

@jimtosh1505 2 ай бұрын

I bought a 94 Honda del Sol my son had one and I enjoyed it so much can I ran out but one we decided to kick it in the pants a little so we installed an Acura GSR with all the goodies from skunk 2 and the transmission received a new posi differential with disc brakes all around now I'm 74 and I still get a kick out of it!

@lastoneleft844 2 ай бұрын

Nice i will be following this video went my oil and service kit arrive in the coming days 👍

@ricardostewart9392 2 ай бұрын

Such a shit place to put it. Ford sucks

@brucemay5409 2 ай бұрын

I like the 600 especially the better trimmed ones! A pair of front fog lights would complete it nicely..😊

@nicochef8 2 ай бұрын

Great guide, do you know how many NM for a 2021 Ford Puma?? Thanks

@Erictheking07 3 ай бұрын

Those 18mm nuts are solid to get off..

@grzegorz36count22 3 ай бұрын

I have 618 grom 1997. Very good car. I drove it 3 times in Croatia💪

@brianwebb191 3 ай бұрын

Cheap Bentley lol , You are spot on with that remark they are made from the Cheapest Crap availible, you think Chinese shit is rubbish ? buy a R/R or Bentley you wll soon change your mind. makes Chinky look Very Good. How do i Know I was an Idiot that bought one ffs, They Do NOT have design shop at R/R FACT a FIAT 500 would be much better buy lol.

@worldhello1234 4 ай бұрын

@0:05 There is no cheap Bentley, mate. They are cheap because they need repairs and parts are crazy expensive as they are for an ultra luxury car.

@kyivwithgeofftanya5546 4 ай бұрын

Bought 2003 3.0 sport x350 with great history. Picked up in London then Belfast, Dublin, Cherbourg, Belgium, Germany, Czech Republic, Slovakia and finally Kyiv Ukraine at about 4k km. it never missed a beat. Now, in Kyiv, 4 new Michelin tyres, engine, g/box, rear axel service & oil/filters, cabin filter and engine oil leak resolved with wheel alignment and air suspension checked over. Then headliner removed, stripped, recovered, replaced. All this work cost less than what I was quoted in UK to recover the headliner 😂 result plus the x350 sport silver with cranberry leather is a real head turner in Kyiv as they are very rare

@davids7273 4 ай бұрын

thanks, useful video with practical tips

@dimitriacas20 4 ай бұрын

Thx for this m8 Just changed mine

@mikekeenam3014 4 ай бұрын

My same mount is leaking oil. Ive noticed i get clunking when changing gears will this fix this

@chitpaul 4 ай бұрын

We had a black 620gsi same wheels, very comfortable car.

@ClotEastwood 5 ай бұрын

Great Vid. Thank you

@markdodds1913 5 ай бұрын

Can you confirm torque settings please

@stephencoyle7853 5 ай бұрын

Get the 620 turbo

@DinoDelight 5 ай бұрын

Great vid, will try later. Im getting a vibrate/humming sound from that area when the AC is on speed 3or 4 so hoping when it was service last week this was put in incorrectly. (Cant hear anything from tge engine bay)

@Smakheed 5 ай бұрын

No need to remove the wipers or scuttle panel, just remove the T30 screw and 10mm bolt at each end and lift the scuttle to access the 3 x 13mm bolts either side.

@tc3205 5 ай бұрын

Ive got same mount leaking on my cmax ecoboost, looks exactly the same, no of bolts and location etc torque should be the same?

@tskend8502 6 ай бұрын

I put 300k on my 97.

@hopkin2006 6 ай бұрын

Beautiful car. Too bad Rovers are quite rare here in Singapore even in the 90s and early 2000s, before the company closed down. I think all of them in Singapore have been scrapped by now.

@cardososm2035 6 ай бұрын

i have a 2006 2.2 d4d with 750k km. stock engine

@Tomek92-Amigo 6 ай бұрын

Very good Engine

@johnrockley9472 7 ай бұрын

I always used to just push the piston back, watching out for overflow from reservoir of course, until a work colleague had done the job on his wife's car, and ended up with no brakes! He had had the bad luck of 'flipping' the seal in the master cylinder, apparently you also run the risk of wrecking the ABS modulator too. No such thing as a easy job! Great video.

@benh6826 7 ай бұрын

I've got this car, and it has an oil leak. At 7:08 in this video, there is a grey cable in the bottom left hand corner of the screen. That has detached from the engine, and I'm not quite sure what it's for and how to reattach it. Can you offer me any advice please

@raider32 7 ай бұрын

Great video, I've ordered a disc and pad set for my Focus ST and I'm looking forward to fitting them.

@CarMechanicsTV 7 ай бұрын

Enjoy!

@godfrey1996 7 ай бұрын

Just changed my ST brakes using this video, perfect thank you!

@SuperPatrick777 8 ай бұрын

Get lost with your tork measurements , simply not necessarily .

@FCMidge 8 ай бұрын

You’re right, most will just zip them up… but was asked to do it proper 😂

@misterxxxxxxxx3392 9 ай бұрын

great video

@sniffergoal 9 ай бұрын

I had a new 205 Junior in 1986 (D reg) - the 954cc petrol version. It was hideously basic, 4-speed and it was dog slow (only about 45bhp I think) but it was economical and 100% reliable in the 3yrs and 55k miles I had it for and a bit more interesting than its Fiesta, Nova or Metro rivals. I did get a rear-wiper for it which came with a new stalk

@gebe8978 9 ай бұрын

03:23, "With the sun shining" (I love the concept of shining sun by British standards...) Now back to the video.

@beamer2169 9 ай бұрын

We're all the bolts the same length. Or are there different sizes

@EdAb 9 ай бұрын

I just bought a 2005 Vanden Plas (Canada), with a perfect body and interior (except for the saggy headliner), with only 47,234 miles on the clock. I paid £7000.00 which I think was fair price, but it does need an air-con evaporator and heater core. The right front suspension (followed by the left front) sags when temps dip below 0˚C. I LOVE, LOVE, LOVE the car, but I do wonder if I made a smart decision buying it. 🤔

@mustafakalkan3829 3 ай бұрын

any updates on maintenance? how much have you spent so far?

@barthomer1000 9 ай бұрын

Had the same problem sunroof drain hoses under dash Rovers poor quality hose fit water runs down soaking carpet front and back strip out everything in the car that carpet when soaked weighs a ton. Lucky for me it was summer 3 days to dry. Love these cars had 5 but my god so many problems from brake pipe corrosion, chassis corrosion, seels corroded, water leaks, the list is endless.

@jakewhite9179 9 ай бұрын

Skipping the fast forward of you putting the hub back on the shock tells me its gonna be a nightmare 😂 nice straight forward video mate, thankyou. Let you know how i get on

@CarMechanicsTV 9 ай бұрын

Best of luck!

@FCMidge 9 ай бұрын

A fiddly one for sure that. Keep going….

@jakewhite9179 9 ай бұрын

@@CarMechanicsTV tutorial was spot on mate. I dare say getting the hub off was harder than getting it back on in my case. I put a piece of steel in the gap you used the spreader in (too block the bolt) and sent the pinch bolt in from the threaded side. Managed to open the mount on the hub a nice amout and the absorber slid straight in. Thanks for the help, earned yourself a sub

@jakewhite9179 9 ай бұрын

@@FCMidge definitely took some perseverance getting it all switched over haha, but its all done and working a treat

@FCMidge 9 ай бұрын

@@jakewhite9179 glad you sorted it. Funny car the Focus. Sometimes they pop right off, other times you wish you had a JCB to pull it out! 😂

@heinobrummer1044 9 ай бұрын

Simple and effective tutorial. Easy to follow and all the right advice ito torque specs and having to lift up the wheel hubs before tightening. Thanks this helped a lot!

@CarMechanicsTV 9 ай бұрын

Glad it helped

@FCMidge 8 ай бұрын

Thanks very much, glad it helped a bit