ABS brakes need pumping

So as long as you don't unplug the parking brake , no reset of computer is needed ?

THANK you! I didn’t know this was a thing until it was too late. Car’s in the shop because water got everywhere! Down the a frame and into the fuse box. Eyesight went down and my brake was stuck on. All because of the leak!

Off topic but have you changed or repaired the HVAC or actuator that changes where the air blows out of? I think the part is discontinued

without removing EPB? cool

That was a exellant alternator chande vid. Thank you.

Exelente video Maestro! Gracias por compartir tu conocimiento, haré ese mantenimiento a mi camioneta.

Gotta be the worse demonstration

This is a great test,i really appreciate you uploading this for all of us to learn. To all the other whining comments about winter tires, stfu

Update your video. Your amazon link doesn't work.

your supposed to support the lower control arm to make hits more solid

Good video.If you do not do this, it will drip and pool under passenger seat (road slope when parked in street is down hill toward passenger side) and could cause issues with computer control box under there. First time this happened I could did not notice untill there was a lake under the seats. Stereo made wire wup wwup noise until it dried out. My 2012 sunroof gets stuck in open position, so I do not use it. Dirt still builds up, parked under oak tree in Sacramento, and we get endless agriculture dust here. Currently have a tarp over sunroof, I forgot to do this before the bomb cyclone! It will also drip from center overhead because it splashes around when driving.....

Thanks for uploading this. Made a world of difference. :)

So this only works if the car can start

Doing this myself and i thought that the ring was part of engine block! Thankfully it is not!

It's the same changing bulbs on a 2010 Mazda 6 also. Just FYI. I owned one for a few years and had to do this before. It's not fun. I wish they were put in with clips like a older Buick 😂👍

This is made like this so they can make MONEY!

That’s not a cover but the bottom seal on the steering box. It needs to be pushed back up to help stop leaks from the gearbox

Brilliant!! I love it!

Silly test! Where are the summer tyres??? AT's are the all rounder. Not to mention Different At's are better at different scenarios.

Im gonna do this as well. Thanks for the video

Last time I replaced these it took me about 5 minutes in my driveway lol. all you need is a pick

That is not a leak. That is oil pouring out.

You made a big mistake by not putting e brake into service mode before working on braes,failure to do this can damage caliper. If your doing your own work don't aways trust a these clips.

THANKS SO MUCH!!!

Cry about the oil capacity!?

Молодец!

Anyone know how to put back the plastic tabs back into place?

Thanks, This video helped a ton!

I would have just gone with a baseline bumper, oh wait that’s 2,500 nvm I would have just made my own the way I want it but that is still badass 👍👍

PCV from Subaru is $37. ouch! $14. from Amazon OEM.

Thank you! This is my first car and I knew someone could diagnose this issue online

Who invented maglites? GENIUS! You can assemble that as a ghost trap.. 😮

That tool works good but the CV axles dust shield will bend .Even if you pull back the CV axle away from wheel bearing .

Noticed that the stickers on the transmission was not the same

Did everything go fine after the transmission replacement ?

I watched several of these videos and had no luck with my 2021 Outback push-button start. Finally, THIS is what worked: 1. Have car off. 2. Turn on "super accessory" mode by pushing start button twice without foot on brake. Everything on the dash will turn on. 3. Quickly, engage and disengage the seatbelt 24 (twenty-FOUR!) times, ending with the seatbelt off. I did not do the quick in-and-out holding the seatbelt latch in, but actually went through the locking step each insertion. 4. Quickly turn the car totally off by pressing the start button. 5. Turn the car on as per usual without wearing the seatbelt. The alarm will sound a few times, but the seat-belt light will not come on, and you can now drive without a seatbelt/alarm driving you nuts. I think it was the few extra "clicks" that did the trick. I am a dedicated seat-belt wearer while road driving, but I plan on using this when I launch my boat and jump in and out of the car many times to do so.

Subaru...es uno de los mejores SUV del mercado actual... relación precio calidad correcta...y pasa por muchos sitios que muchos SUV ni de lejos...un SUV rodar y familiar yo tengo un forester y lo compré para circular por terrenos nevados...antes tuve un xv...y mucho antes barios Nissan patrol...y terrano y no son para viajar con los patrol cruze el desierto del Sáhara...y son para eso...los Subaru...rodadores ,seguros y cómodos!!! 💯..para Subaru.

I know this video was uploaded two years ago, but I'm in the money for a transmission replace. 4EAT to 4EAT. but i cant seem to find a list of everything part wise i would need to buy new and replace for it. If any one can help man I'd appreciate it

(2018 Outback 3.6R) This saved me a ton of time. I got the old wiper off in seconds and spent 30 minutes trying to install the new one. It just would not go on. Then I found your video and the tip to install the bracket to the arm *first*, then attach the blade to it, made all the difference. I was just about to return the whole thing to the store!

Thanks! 🙏

This may be the most helpful thing on the internet. Took what would have taken me 4 hours and made it a 45 minute job. Thank you for making this!

Very simple video if one ever has done a few brakes to a 1964 ford ! I was going to pay big time. You just save me many bucks buddy . Thank you ~ Blessings

Thanks for your video 👍🏻

What pressure did you deflate your tires to in the Roo? I just bought a 2017 2.5 as an everyday driver, but I'm going to start setting it up for trial riding. I also own a 2018 Outback 3.6 (that's my Lil Millenium Falcon, you know it made the Kessel Run in less than 12 parsecs).

Thank you!

heat casing with the torch not the bolt...heating the bolt makes it tighter

How did u disconnect the right one

Thanks for that! It fixed my headlights.

Thanks dude, was worried I was going to break it