Pretty sure those lifts are backwards. When you're lifting it initially the front is unsupported.
@killaspeed187412 сағат бұрын
Shits ass don’t get it
@dustytanco691716 сағат бұрын
I used to have a 2012 gt 6 speed absolutely loved it.. that coyote motor is a jewel the sound with headers is absolutely intoxicating
@popleo123Күн бұрын
i want one
@keithromero7181Күн бұрын
Thanks bro, that gtr is toughhhh
@horavast012 күн бұрын
Hello friend. I’m looking for my WRX 2023. But can I use the one from another model here? I didn’t understand that part.
@Silverbulletzx32 күн бұрын
I've had my car for a month. The first week i had it, I put on the MBRP axle back that has the black shrouds. Sounds awesome, until you hear the drone at about 2.5k on to about 3.7k RPM. I just picked up the Noble Titanium single exit. Just waiting to get it to put it on. Honestly, based off of your Noble video. I can't wait!
@SubieLifeWRX2 күн бұрын
I got mine! I love it
@RodofAllTrades3 күн бұрын
Awesome video! The other day, I went to see what was under them grills for the tweeters and removed them. I noticed that the wires were pretty short and thought, OMG how am I going to change this out? The link to the harness adapters was very helpful! I think what I may do is put a pair of Infinity Kappa Perfect 300M's in the corners, then just punch a couple holes in the A-pillars for some component tweeters! I already replaced the front doors with JL Audio C5 6.5" components.
@angelmendoza17623 күн бұрын
Why are you moving?
@morrislong33583 күн бұрын
Welcome to Arizona!!!! we have so much room around for Great Car Content! I'm a new subscriber, keep up the Hard WORK and we'll see you soon
@TheGODZILLA1434 күн бұрын
you're not worried about having no dust Shields at all in the rear? I think I'm just going to trim mine connect to keep some protection
@SubieLifeWRX4 күн бұрын
Installing mine this week✊🏻
@JDMRightHandDrive4 күн бұрын
That's awesome, so happy for you. Enjoy its an awesome exhaust.
@SubieLifeWRX4 күн бұрын
@@JDMRightHandDrive also installing the turbo smart blow off valve
@ZUKME4 күн бұрын
Love it
@JDMRightHandDrive4 күн бұрын
Thanks so much!
@TaranRamjit5 күн бұрын
I recently changed from Valvoline Advanced Synthetic 10w-30 to AMSOIL Premium Protection 10w-40 and it seems like my RB25DET Neo runs much better. AMSOIL seems to hold out much better than most oils.
@Seattle.5 күн бұрын
Its the same with mine Or it could be the worst kind The serpentine bent If it keeps on honking Check the the fuse Of the left corner Remove it while your car charge
@kevboost6 күн бұрын
😢
@JDMRightHandDrive4 күн бұрын
Thanks for watching.
@riptas71966 күн бұрын
I removed all my heat shields & metal bits from under the car then had them blasted and powder coated.
@JDMRightHandDrive4 күн бұрын
I still need to do from front and rear sub frame.
@aneeshprasobhan6 күн бұрын
Can you also do a video on differential fluid change ?
@aneeshprasobhan6 күн бұрын
do i really need to use quick jacks for letting out the overflow drain plug (level plug) ? I only have two ramps :(
@aneeshprasobhan6 күн бұрын
how many times did you drain and fill ?
@BioCosmic--Dust6 күн бұрын
Thanks for the update Josh. I'm looking forward to seeing your car stuff in a 4 car garage! But not looking forward to losing another car nut neighbor.
@JDMRightHandDrive6 күн бұрын
Yeah Gary the 4 car garage is going to be a huge blessing.
@DEADSPIRITSDC7 күн бұрын
Where in AZ? I grew up 253 and my family is still on the plateau in Wilkeson. I’m down in southern AZ now.
@JDMRightHandDrive6 күн бұрын
Our new house with be south of Tucson out in Vail.
@DEADSPIRITSDC6 күн бұрын
@@JDMRightHandDrive I’d love to connect when you get down here. Welcome you to the area. I can introduce you to Mt Lemmon and its glorious mountain road. What’s the best way to connect?
@BioCosmic--Dust6 күн бұрын
@@DEADSPIRITSDC Would that be E Ski Run Rd? I'm just now looking at it in google maps. I've never been there. Looks like a good WRX road!
@DEADSPIRITSDC5 күн бұрын
@@BioCosmic--Dust It's a fantastic road. I was up there in my WRX with the family to hike. The drive up and back was a blast and informs me quite a bit as to my upgrade future.
@colinjt27 күн бұрын
What brand DRL headlight led bulbs are you using? Hyperflash issues?
@travissemmler90617 күн бұрын
Was about to ask if you were going to repost the video, I went to watch it yesterday and it was gone .
@JDMRightHandDrive6 күн бұрын
I had to repost it because it got copy righted the first time. I didn't have my KZbin channel linked to Epidemic Sound for some reason. Thanks for watching and for your support.
@Impekible17 күн бұрын
#family 🫡
@JDMRightHandDrive6 күн бұрын
Thanks so much for the #family
@Impekible15 күн бұрын
@@JDMRightHandDrive balancing your passion with priority being family is very hard as a dad and a husband I support and respect it ! 💪🏽
@adamkudrich44947 күн бұрын
Good luck with the move!
@JDMRightHandDrive6 күн бұрын
Thanks Adam, I have a lot of hard work ahead of me to get packed up and out of here.
@eminye17 күн бұрын
Well done man, wish you Godspeed.
@JDMRightHandDrive6 күн бұрын
Thank you, I am very excited to start putting the car back together and get my family all set up on our new house.
@synaptik1118 күн бұрын
Thanks for this comprehensive setup tutorial! I just got my 5000TLs and will be setting them up soon. How long did it take you to get them up and running in total?
@kraggman8 күн бұрын
Thanks a lot. This was interesting. I put up a video on my channel five years ago of one of these ships unloading in Philly. (kzbin.info/www/bejne/Y5uYlot-gpx7rqs) I always wondered what controlled chaos was happening inside.
@MediumM388 күн бұрын
Niceee
@ainhoabraidjoelkarimdaniju31048 күн бұрын
I love your videos 💕
@glennmarcucio9 күн бұрын
I believe the OEM LED fog light trim bezels only light up the LED's for DRL's and not turn signals too. Can these JDM style be wired to just use the LED's as DRL's only without using them as turn signals? If so would it be a plug and play or would you have to do additional wiring to install only as DRL's?
@jethrot10010 күн бұрын
How much unsprung weight was saved with each new disk?
@Dragandspinn10 күн бұрын
Well done brother. Excellent video.
@ericolguin205411 күн бұрын
What was the set up with the ETS? Were they muffled, or was there a resonator? Curious to know because other people’s videos say the resonator cancels the droning.
@Crimor11 күн бұрын
When you were letting the level plug drain at 9:46, did you turn off the car at some point while the car was leveling? Just curious, I just changed mine with ur video and I left it on while I let it level
@Legendairy212 күн бұрын
Where did you get the foam? Were they included with the speakers/tweeters?
@KillaBuilds12 күн бұрын
Ordering one this weekend and installing soon, awesome video for reference for installation! Question i have an OTS 91 Dmann tune would I need to message Felix performance to adjust my tune? #Totheend
@mistamaog12 күн бұрын
Do you think that isn't the TR calipers would yield the same result? I heard from some people that they're basically the same as STI calipers. And plus brand new they're way cheaper than getting STI calipers new
@emanuelsopt12 күн бұрын
Thank you very much, my friend. You save me a lot of money and God bless you.
@JesusPerez-eb6ly12 күн бұрын
Did u cut the bumpstops??
@rommelsegura909613 күн бұрын
how do you refill the washer tank?
@mikecrandell49413 күн бұрын
If you buy all your speakers from Crutchfield, the harnesses for the speakers and the mounting brackets for the speakers are free!
@borntokill15813 күн бұрын
My QJ are never going down when there is no weight on them. I did the bleeding procedure 10 time, there is no air in cylinder. The little tanks are at 50 psi.... Help
@gabrielkingdom628613 күн бұрын
Awesome!
@ProjectWolve13 күн бұрын
Ive been searching for days for instructions like this. Thank You!
@SurinderKaur-ou8ql13 күн бұрын
Thats a 1 of 3☠️☠️☠️☠️☠️☠️☠️💀💀💀☠️☠️💀☠️
@namtrinh614214 күн бұрын
I have a little question . Please give me advice . How you feel cobb intake tube . My car have ets mid pipe + mufflercatback + k&n air filter Because i have plan with perrin turbo inlet + cobb charge pipe . No tune . Pls give me ur opinion . Thanks ,