Many PC shops will give you some rubber plugs that will fit many of the holes. I believe that there are some masking tapes that work better in the heat that the frame will experience in the oven so the glue doesn't melt and the tape slip away. I would also suggest that you ask the PC shop to write the brand name and colour code of the PC that they used on your invoice. If you need to do any future PC work on that bike, this will save you a ton of headaches. And, if you think that all blacks are alike, ask the shop. They probably have many levels of sheen.
@UltradoesYT12 күн бұрын
Kan ni wachten om men rijbewijs te halen zodat ik mijne eindelijk uit de garage kan halen 😅😂
@retrosmoke12 күн бұрын
I remember those days!! Good luck 🤞🏼
@roger515912 күн бұрын
My first bike in 1982 on L plates and fully embracing the green fishtail parka and Mod scene in the UK. 150 Super distinctive with its rectangular headlight. Did great wheelies too!
@Badboyrich198215 күн бұрын
Thought you were gonna spray in the kitchen 😂
@retrosmoke15 күн бұрын
No chance!
@millymoo657515 күн бұрын
Not bad! Not bad at all👍
@retrosmoke15 күн бұрын
@@millymoo6575 thanks pal!
@tybgycfmb869717 күн бұрын
Really enjoyable watch. Awesome wee project. Shiny side up!
@alexjohnson161224 күн бұрын
Will the GP 200 do 100mph? My work mate had one in black.
@GabsSystemsbuster28 күн бұрын
epic build im in uk and currently building the same jog although with an 88cc airsal xtreme kit and selettra inner rotor and more.. have u gt an email addy for a chat and poss if u have any parts i could poss need.. having trouble sourcing parts here in uk
@millymoo657529 күн бұрын
Very cool.. it’s going to blow 🏍️💨
@fabriciodefigueiredo3426Ай бұрын
Congrats, great job!! Looks amazing!!
@A4_15_zombiesАй бұрын
I want to drink beer and smoke cigarettes while on the highway going 90 kph I hope you get the reference
@Alan-wn7loАй бұрын
Lambrettas look Beautiful in motion ☘️💚
@ChannelPro-YtАй бұрын
Runners are the bees of scooter same with speedlight 2 😂 and SR50
@ChannelPro-YtАй бұрын
I maybe late but this scooter been restored was awesome to watch. Looking for 1 myself to race tune up😅
@djmorenofigueresАй бұрын
with the reverse gasket on the cilinder ???
@retrosmokeАй бұрын
@@djmorenofigueres you saw in my video I corrected that.
@djmorenofigueresАй бұрын
la junta del cilindro esta al rebes , con el transfer hacia abajo , fijese en el video , mal montaje
@retrosmokeАй бұрын
@@djmorenofigueres yes and if you listen with your ears, I said I corrected it!
@retrosmokeАй бұрын
11:56 👂
@callumthomas653Ай бұрын
Cranks off centre
@retrosmokeАй бұрын
@@callumthomas653 it ain’t mate runs like a dream 😴
@kierangaffney7259Ай бұрын
Awesome video mate !
@morris9229Ай бұрын
Cool bike, what was your top speed with this?
@Someguy12366Ай бұрын
Wow so amazing
@MarkkuIsäpuoli-l8lАй бұрын
No nyt on komiaa, myytkö tuon?
@retrosmokeАй бұрын
No no no never
@stripfix1979Ай бұрын
Lovely little bike... I'm sure I see you going in Eastbourne wickes the other day 😄😄😄
@rinjoo3Ай бұрын
Nice two stroke smells? 😎🤪
@Badboyrich1982Ай бұрын
Yes mate add me so I can send you stuff, I got a new grom :)
@millymoo6575Ай бұрын
You’ve totally redeemed your self! 😊
@salesfoundations4406Ай бұрын
The only problem with that bike and I really like it My friend has like five bikes one of those also The design of it is really not great The front end is so unstable just too light and the fact that has no shifter or that little up and down shifter is horrible I mean just make it a CVT automatic if you're not going to put a clutch in it just not a good design would prevent me from buying it so I didn't. Got a TW instead such a good choice
@natebyrd51072 ай бұрын
No ThanK you
@Bobbybooboo5052 ай бұрын
What happened, did your phone battery give up….
@tomasterber85032 ай бұрын
could you send me a link where i can buy spare parts for yamaha jog? Have same model and the plastic parts are impossible to have it. Thanks for help!
@victorhawkins34612 ай бұрын
A really well-done cosmetic refresh! Good on ya'!
@victorhawkins34612 ай бұрын
This fall, I'm doing a Malossi 70cc upgrade to my '01 Vespa ET2. Great job, dude...and your flywheel removal hack was crackin'!
@retrosmoke2 ай бұрын
@@victorhawkins3461 ahh thanks Victor much appreciated. Good luck with the build 😎
@vladislavkoval20182 ай бұрын
Very nice video thank you! I have 1999 3kj vino, thinking about putting 65cc in it
@vladislavkoval20182 ай бұрын
Now i run stock air cooled 49cc. Front and rear cvt sheaves are from newer Jog sa36, they fit just right in, only you have to leave old front roller plate to fit on 3kj crankshaft. Front fork, brakes and wheel are all from sa36 jog, had to adjust handlebar mount place a little, the fork fitted just right in frame and is very comfortable to ride with. 36's speedo cable also fits. Front brakes on 36 are 110mm instead of 95mm stock, so they work better, and they are same size now as rear ones. I installed blue 1500rpm spring in rear transmission sheave and left stock 36's rollers (5g each). Belt is Bando 792*18mm, very good quality, they last long. Scooter has good torque now and goes uphill fast, there are very much hills in Armenia. Exhaust is Lipai, something taiwanese, also works good. Also transferred battery to seat, so it doesn't stay horizontally like stock one. Maybe will add some led lights to speedometer and fuel meter :)
@retrosmoke2 ай бұрын
@@vladislavkoval2018 great stuff I’m glad it’s inspired you mate!
@JakeM2182 ай бұрын
Brighton Vespa Club!
@bikelife-pw1cz2 ай бұрын
Yo what size are the brake shoes (back)
@vladislavkoval20182 ай бұрын
110mm
@SUGARG0D2 ай бұрын
I have a yamaha nextzone, trade?😭💕
@retrosmoke2 ай бұрын
I would love to but I’ve sold it a long time back!
@SUGARG0D2 ай бұрын
@@retrosmoke oh cool, I'm decorating my jog to try selling it for good price😁
@Mason-v1n2 ай бұрын
Did you have to modify it to fit that ?
@retrosmoke2 ай бұрын
No it fits fine
@Quemero9812 ай бұрын
hola amigo, tengo la misma moto ( color y modelo ) estoy en proceso de restauracion ( 30% ) me encanta este video y los otros. valoro la informacion y los tips. gracias saludos desde Argentina, buenos aires!
@retrosmoke2 ай бұрын
Thank you sir! Enjoy 🇦🇷
@khiriskandarshah16912 ай бұрын
Top speed?
@mreasy45813 ай бұрын
Heating the bearings will cause cracks in the bearing
@retrosmoke3 ай бұрын
Course it will mate 😂👍
@Mohennep-c6m3 ай бұрын
he put all that effort into a moped but not into the gym
@bobsessedonbikes16843 ай бұрын
If you get rid of the vision I have the perfect replacement for you. A Honda dio baja. The only one in the U.K. let me know if you’re interested.
@MrBerenguer673 ай бұрын
Wo to fix this the wiring I like to fit on my Vespa please let me know the wiring deagram
@glenfireblade3 ай бұрын
hey i recognise that green vision at the back ! i must have bought it off you in november
@retrosmoke3 ай бұрын
@@glenfireblade hey mate not me, my pal Jack no doubt!
@glenfireblade3 ай бұрын
@@retrosmoke ah yeah Jack ! lol I forgot his name ! this old girls back on the road again now, was a fun winter project/money pit 😂 I just picked up a 1990 Yamaha BWS for next winter 🛵💨
@billAek3 ай бұрын
The sound its so cool.. What a engine do you have? Because i want to buy this exhaust for my 125 dax 2023 model... But your engine sound to much performance and very fast the rpm coming up...