7 жыл бұрын
8 жыл бұрын
8 жыл бұрын
9 жыл бұрын
9 жыл бұрын
9 жыл бұрын
9 жыл бұрын
10 жыл бұрын
10 жыл бұрын
10 жыл бұрын
10 жыл бұрын
10 жыл бұрын
10 жыл бұрын
10 жыл бұрын
10 жыл бұрын
Пікірлер
@dawnlowry3279 Жыл бұрын
Excellent excellent video. By the way, where did you get the painting model holder?
@jay.from.intrnl Жыл бұрын
This helps so much!!
@steve-ec5wp Жыл бұрын
SUPER COOL!😄!
@Unit_With_Legs Жыл бұрын
Putting the thinner in first helps
@johnkim7890 Жыл бұрын
Hello, I was wondering is it possible to use Vallejo gloss varnish over other acrylics like Mr. Color? I am currently candy coating and I need that super gloss finish. Thank you for the tutorial too!
@TonyMicilotta Жыл бұрын
Yes I’ve used different gloss coat products e.g future floor polish. Mr Color super clear seems to be a top gloss coat that you could try too
@rushikeshjoshi7888 Жыл бұрын
Just Awesome...
@TonyMicilotta Жыл бұрын
Many thanks! It was fun for me to look back at this video today 😅
@killhix. Жыл бұрын
Is it sticky to the touch?
@TonyMicilotta Жыл бұрын
While it’s drying yes, but it then cures hard.
@calvin14888 2 жыл бұрын
It seems like u didn't bother to re-scribe all the panel lines? And I will not use tape on that leg piece as the tape will breaks over time and you can't get into it as the legs parts are already glued.
@TonyMicilotta 2 жыл бұрын
No, the resin is so soft and after a couple of mishaps I decided it wasn't worth the risk
@calvin14888 2 жыл бұрын
@@TonyMicilotta Ya, I'd assumed so cuz G-System resin is not that good. I've got the GSB version and the quality is day and Night compare with G-System 🙂
@calvin14888 2 жыл бұрын
This is not a snap kit, the neck you need to think a way to attach it eg. brass rod...None of the parts will be snap fit mostly such as the back of the piece you're mentioning, you need to think of a way to either modify the part to fit or modify the back of the torso to fit. You need to use pin, rods, even magnet for resin kits this is what resin kit is all about...
@louiegarcia7992 2 жыл бұрын
Which Monster clay did you cast with Soft, Medium, or hard?
@TonyMicilotta 2 жыл бұрын
I bought this clay many years ago and at the time they only had one type. I’d probably say it’s medium
@rgj8044 3 жыл бұрын
What is the air pressure setting on your compressor?
@TonyMicilotta 3 жыл бұрын
Around 12 -15psi
@aljanralphtan5827 3 жыл бұрын
2021. thank you
@jakubprachar8231 3 жыл бұрын
wtf you say "future floor polish" but you use WAX which is different product
@TonyMicilotta 3 жыл бұрын
It used to be called Future Floor Polish or Klear depending on the region I believe. As stated on the bottle in the video, it’s now branded as Pledge Multi-surface Wax. Note that it does not offer UV protection like top coats created specifically for model making.
@moxxiloquita2048 3 жыл бұрын
I read somewhere that the proportions thinner varnish are 4 to 1. 4 parts thinner and 1 part varnish ( for airbrush) is that correct?
@TonyMicilotta 3 жыл бұрын
Different brands will having various thinning recommendations, especially if you’re comparing an acrylic to say a lacquer like Mr Color GX which is 1 part varnish to 1.5 parts thinner. 4 Parts thinner to 1 part varnish seems extremely thin. I recommend starting at 1:1 and then adding more thinner if required.
@moxxiloquita2048 3 жыл бұрын
@@TonyMicilotta thank you will try that, I use Vallejo varnishes. But try to Gerry the mr.hobby one Heard it's good
@havocsurge7667 3 жыл бұрын
I know this is an old video, but jesus man, you soaked that sucker with the coat. Once you see it's got that wet look just stop
@bob00768able 3 жыл бұрын
On vois rien sur ta vidéo ?
@Steve-dr7rr 3 жыл бұрын
The blue looks to thin as it’s spider webbing when you spray it
@opwave79 3 жыл бұрын
Very helpful, thank you! I’m still deciding between gloss, satin, or matte so I’m watching as many videos as I can to help. Appreciate your insight and tips.
@jmbcorreia72 4 жыл бұрын
I think the medium you are using hardeb«ns to fast an there is not enough time to release the air. Maybe trying something more fluid and with more a longer curing time would do the job.
@AGMetcalfe 4 жыл бұрын
nice work on this. Did you pin or magnetize the cape?
@TonyMicilotta Жыл бұрын
The cape hooks into the torso beautifully so it just hangs in place 🤩
@baghatur1177 4 жыл бұрын
Can this frame be diassembled into pieces to paint or you have to paint the whole thing as it is?
@TonyMicilotta 4 жыл бұрын
Not really no; they bolts have somehow been tightened into recesses; I needed to remove one part of the leg to clean the metal pistons and it was a little destructive
@SwingCritic141 4 жыл бұрын
RIP rotator cuff In all seriousness this is awesome, great work
@bongkem2723 4 жыл бұрын
awesome build !!!
@Bigelsiet 4 жыл бұрын
Maybe purchase swan lighter fluid or a generic brand rather than the ludicrous priced Zippo stuff?
@jnpaesano 4 жыл бұрын
Very informative video. I am wondering where you purchased the cubes that your aligator clips are attached to???
@TonyMicilotta 4 жыл бұрын
What's this? They are called memo clips but end up being a bit expensive
@carolinaruiz8280 4 жыл бұрын
What is the material please?
@TonyMicilotta 4 жыл бұрын
Carolina Ruiz I used a fast cast resin from PS Composites in the UK.
@yubidubi 4 жыл бұрын
Great video
@alanbarkey8929 4 жыл бұрын
Anybody else wonder why he was putting varnish on dick shaped models? XD awesome tutorial! I was scared to use the airbrush with the varnishes but this helped!
@TheGamesNexus 5 жыл бұрын
I've added a link to this tutorial in my article about miniature varnishing - alkony.enerla.net/english/the-nexus/miniatures-nexus/miniature-hobby/miniatures-how-to-use-varnish-on-miniatures-miniature-hobby-guide
@philipburkart8492 5 жыл бұрын
If you scratch the liquitex hard enough with your fingernail - before and after adding the permaseal - will the paint scrape off? I’m having trouble with this issue when I put liquitex on my resin statues.
@TonyMicilotta 5 жыл бұрын
Philip Burkart yes it’s an acrylic paint so it’s not very tough. If you’re going to be handling your models something like Mr Color GX lacquer paint will be good but you’ll need to take extra precautions due to toxicity.
@philipburkart8492 5 жыл бұрын
Tony Micilotta thank you!
@kaluznyjulian5412 5 жыл бұрын
Hi Tony where are you buy this kit? thank you 🤜🤛
@TonyMicilotta 5 жыл бұрын
kaluzny julian I got it from statuetopia ; they don’t have a website anymore but you might be able to find them elsewhere online
@kaluznyjulian5412 5 жыл бұрын
@@TonyMicilotta okey thank you very much Tony 😊
@schrama007 5 жыл бұрын
very nice. What are the dimensions of the box. Going to hong kong and want to figure out the suitcase size
@TonyMicilotta 5 жыл бұрын
schrama007 yeah this is an amazing kit and a good challenge! Unfortunately I dont have the box anymore but in my 2nd vid I compare this box to a Perfect Grade box kzbin.info/www/bejne/jmSUhIJ4Zbp6hZI
@TonyMicilotta 5 жыл бұрын
looking at the 2nd vid, the g-systems sinanju box weighs 2.8kg
@technicalerr0r 5 жыл бұрын
so triggered by that untrimmed nub
@TonyMicilotta 5 жыл бұрын
technicalerr0r 😂
@faisalkatana6673 5 жыл бұрын
hi there 👋 , do you make commission work for the kit G-System 1/60 RX-78GP02A Gundam 'Physalis' ?
@TonyMicilotta 5 жыл бұрын
Faisal Katana yes I would be able to do that for you :)
@TonyMicilotta 5 жыл бұрын
Faisal Katana please see my about page for contact details
@eddiegremlin 5 жыл бұрын
Do you use the Gordon’s as thinner too?
@jorey4565 5 жыл бұрын
Decoart triple thick gloss glaze..ultimate mirror gloss finish in airspray bottle,try it !👍👍
@jorey4565 4 жыл бұрын
@Chris McRoyi used it direct from the airspray can ,but need to do some test before because i bough recently some Decoart triple gloss and inside can some part of the varnish have dry and make a bad results ,maybe product aging bad in shop storage...need some test before using it ! I have not use in bottle this product,sorry .
@kevindouglas6120 5 жыл бұрын
Thanks for showing this. It looks pretty real to me. I'm not familiar with airbrush so I'm going to have to find some acrylic that I can simply brush on. Thanks.
@fangirl988 5 жыл бұрын
Just subscribed 👍🇬🇧
@kevindouglas6120 5 жыл бұрын
My gosh that looks good. Are these paints you're using good to use on a 1/6 scale plastic body like a Hottoys figure? I'm having to paint the neck of a body where the headsculpt scuffed it up real bad. Whoever owned it before me was kinda rough with it I guess. If you have a suggestion on what kind of paint I can use I just need to do the skin color on the neck. Thank you. I appreciate any help at all. Your figure there looks awesome man.
@TonyMicilotta 5 жыл бұрын
Kevin Douglas Thank you! Yes these paints are good for any model IMO. I have a vid on skin painting that I think you should find useful: kzbin.info/www/bejne/e3eyiIB7hM6dgMU . Links to products can be found in the video descriptions.
@kevindouglas6120 5 жыл бұрын
That's cool. Thank you.
@mar78andres28 5 жыл бұрын
Hello, do all G system kits require painting? I’m interested in the Kshatriya. Great video by the way!
@TonyMicilotta 5 жыл бұрын
Mar78 Andres some kits have the option to be bought pre-painted which are pretty good value given how long they take to assemble/paint.
@cmdrcrimbo 5 жыл бұрын
I have Polyurethane Gloss Varnish, What is the difference between that and acrylic varnish please?
@cmdrcrimbo 5 жыл бұрын
I am planning on using it in many thin coats with very light fine sanding between coats to put a finish on dye'd wood guitar body, Have i bought the correct type of varnish? Anyone have any advice? Im pretty good at the woodworking but iv never done any finishing vith clear gloss.
@TonyMicilotta 5 жыл бұрын
Chris Bradley Hi Chris, acrylic varnish is water based while a polyurethane varnish can be oil based. Since you’re varnishing a guitar that I assume will be played, have you considered using a lacquer?
@thebull3793 5 жыл бұрын
I know it's been awhile since you posted this video but I have a question for you...I just recieved my G-system kshatriya and cant figure out how to unscrew the screws for disassembly...any ideas??
@TonyMicilotta 5 жыл бұрын
The Bull Unfortunately, I was never able to unscrew. For the joints that needed tightening, I ended up scraping out a bit of plastic around one end so that I could use needle pliers... surprisingly odd design
@vhappylokme 5 жыл бұрын
I look forward to your next project.
@HALICrafts 5 жыл бұрын
Hey can u tell me that can i use winsor and newton matte varnish in my dolls face??plz i need ur help
@TonyMicilotta 5 жыл бұрын
H ALI crafts I haven’t used their matte varnish but like any new product it’s worth trying it out on a test piece first
@HALICrafts 5 жыл бұрын
@@TonyMicilotta ok thank u sooo much for ur help😘
@reginaphalange7637 5 жыл бұрын
H ALI Crafts sadly it goes sticky and it doesn’t really work. I’ve tried it on mh faceups before but it’s really really bad. Beside msc, I use liquitex Matte medium or Vallejo premium colour matte varnish. But both use with airbrush. With liquitex matte medium I’ll have to thin it down to use with airbrush. :)
@jafp1617 5 жыл бұрын
How long is the dry wait between the primer, 1st and second acrylic paint coat?
@TonyMicilotta 5 жыл бұрын
Johnhae P it depends on the weather, but 20minutes between each of the above is usually fine if you do thin coats. I then let it rest for a day so that it can cure before applying a gloss coat.
@eddiegremlin 5 жыл бұрын
Ha! We stupidly used klear, in the army to put a gloss on bulled boots. It turned them blue. Don’t touch it with a barge pole...
@chozen_juan 6 жыл бұрын
Couldn't you have used a vacuum chamber or pressure pot to get rid of the bubbles while the clay was liquid?
@TonyMicilotta 6 жыл бұрын
yes a vacuum chamber would probably have helped but I didn't have one at the time.
@leenewey4683 6 жыл бұрын
Fantastic , the skin tone ..is it sprayed on ?
@TonyMicilotta 6 жыл бұрын
Thanks! Yes, the various layers are airbrushed
@dannymunoz1153 6 жыл бұрын
"I'll see you soon" Narrator: We would not see him soon.
@davidwozny3484 6 жыл бұрын
Hello i have many problemes with hall valleijo varnish specialy when i use it on top coat in a body car i prefere x22 tamiya