Is it 4 meters of fabric or 4mm of fabric because on the site it shows 2 mm for 12£

Have you retrofitted the LED DRL to standard headlight models before?

Fantastic job on the wheels. It's refreshing to see proper silver wheels, not horrible black ones (though, Gold wheels can go surprisingly well with red cars) Nice one! 👍

Big Thanks to you for this video that "saved my life". I had my Ford Fiesta 2005 with a blower making alarming noises. This noisy blower was installed by my mechanic that changed the faulty original one with a fan recovered from junkyard. He said that it was impossible to find a new blower for this old car because the original Ford spare part would have cost me hundreds of euros (!). The problem was that this "new" blower worked but was noisy as hell. So I went on almosta a year with this horrible noisy fan. Then I started to think that maybe a little greasing could have improved the situation. So i searched online and I found you video. After viewing the video I took courage and embarked on the task of dismantling the noisy fan it to see if I could fix the problem. After a lot of curses I managed to disassemble the fan. I tried with electrical motor lube and then I temporarily reassembled the fan (only two screws and without the moving cover). The noise was still there. So I searched with google and I found a online shop in my country (Italy) that was selling the right fan for my car model at an affordable price. So I bought the fan (45 Euro) and then I assembled it (with a lot of curses again) and now it works like a swiss watch. I thik I watched your video at least 10 times to memorize where the parts and the screws are located. A thousand thanks to you

stumbled onto this while trying to figure out what, if any, options there were for the Mk7. I'm not sure what it's like in the UK, but in the US, the HVAC lights are teal green, the radio lights are white, and the gauge cluster is red and white - none of it matches and it's annoyed me since day one. I might feel brave enough to take this on now. Unfortunately it looks like everything in the Mk7 is a super tiny SMD.

I’ve that job, AGAIN! hate it. Got a mec to do it for me. I’d rather pay someone else to break their back at my age. Good post btw. Thanks for that.

Did you end up writing it to the IPC as well which is the backup module for the Central Configuration in case it needs it??

Sure, here iWhat type of adhesive did you use to attach the roof lining to the roof?

Anyone got any better ideas? Ive managed to do the first bit where it seems loose but I'm ripping my hands apart trynna rank it off and it won't budge

what a nightmare engine to work on....special this and special that and that stupid friction crank bolt... ford get a life and make life simpler

Mine were so filthy it failed the MOT and I got rinsed £360 for two new ones. Pretty sure most of the crap was on the inside.

10/10 for the nob gags! great video!

I know I’m 3 years late but does anyone recommend what grit sandpaper to use

2 years later I wonder if that couple are still together! the cat-back sounds sweet!

Thank you a lot! I folowed the steps as you described and it works! Really apreciate it! Top man

To get the best pro glossy look finish it with 2k coat.Nice fiesta i got mk5 only red need to paint the bumpers 😂

When will you do the flip key mod

Cheaper to buy a new tool.

Both Flow Flex and Powerflex ARE NOT Polybushes - Only we can make Polybush. But that said, good video, lots of good tips.

Any idea what the 2 radon small o rings are for im scratching my head.

Nice one bro 👌 👍

Hey, Boy! I loved the whole engine assembly process, you were very detailed in each assembly process. I'm from Brazil and I'm passionate about engines, especially when they're Ford.

Will you be at Ford Fair this year ?

Cheers man, just came to check if the Milltek link pipe was interchangeable with the Hoffman and it's clearly not. I'm gonna have to bite my lip and go for another Hoffman 😂. Had to use full adjustable hangers to get it even sitting OK and loads of paste to stop blowing, mehhhh. Can't find anything else to use that doesn't come with a resonator

Wow I never thought you could do that or I would of done it on mine. I had the same as you and I loved it so much it had everything looked good grate on fule £20 road tax and that 140 bhp can shift. I spent almost £1000 on security and the scumbags stole it and wrote it off in 8 mins of even having it was so gutted

What height are the springs ?

Could you send me the document? Or could you sell me the document?

fuck yeah dude this whole series is giving me life. i just got given a 14 year old MK6 by my gran to force me to get my license and, as a goth, I hate the colour, ironically the exact same colour of your wrap haha I'm planning on doing a gloss black wrap and your videos are bloody invaluable! i wondered how many panels the car had to cover, what had to be removed to be wrapped, and if i really needed more than 15 metres! This has been so so so helpful.

I was able to add cruise control to a 1999 Ford Escort. I was able swap out the steering wheel. The wiring harness and mounting points for all of the components were there. It was plug and play fortunately.

I enjoyed your videos over last few days... i was gifted a clean m7 titanium only a diesal but that lump will be coming out at some point. Considering i had it for zero, and its a fiesta i am going back to my roots (Maxpower Magazine) going to rubild the entire car... its a 5Dr so that will be something different, hope you upload again.. Enjoyed your vids 🏴󠁧󠁢󠁷󠁬󠁳󠁿

Great video. Used this after fitting steering wheel with cruise control to my c max. Had to do a couple of extra steps in Forscan though. As well as enabling cruise control I had to go into Engineering 1 mode and select Adjustable speed limiter then change it from without ASL to with ASL. Write this change the same as you did for cruise control. Then most importantly you need to go into DTC on Forscan and clear errors. (I had B112B steering wheel module error). After that cruise control worked fine.

Awesome, I reckon I'll try this myself! Many thanks and great video!

Hi my friend i have got good 👍 explaining thanks so we have the car 2007 ford fiesta &i don't no where you are can we get parts of engine

Great looking car love the colour

😂😂😂😂. I enjoyed your clip

My man you are very talented man

If I bring my car will you do mine?

Привет. Куда пропал? Когда новые видео? 😊

I hope that timing belt doesn't suffer the same short lifespan the OEM were known for in the 1.0 Ecoboost.

exellent

Can you get inside the lens in anyway?

Looks very nice buddy :)

Nice one mate

Should not oil head bolts I rebuild engines for a living putting any head bolts in at all always should be completely dry where the headbolts go as can cause air lock at bottom and crack head in the very worst case

Where did you get the bolt on eye that you use to attach chain to gearbox please

👎Great idea BUT you made a huge error. Which is why it got harder and harder to put that bolt in. You MUST tap (thread) both holes from one side. If not you end up with one side having reversed threads and you will have to cross thread (ruin) the bolt. Righty tighty lefty loosy. The way it was done the bolt would go thru the first hole with no problem but then hit left hand threads on the other side then it would either stop or cross thread and be ruined. I was surprised you got it in at all TBH. Its vey simple if you think about it. Also stainless harware is very easy to ruin. Ive seen it happen many times at work. Someone with run a nut down with an impact instead of with their hand or wrench, then tighten with impact. If you run the nut down fast with an impact or drill the threads will lock up and it will need to be cut or broke off. Ive personally had to break many stainless studs using a wrench and impact and about 5 min per nut. Its hard work. We couldn't cut because we couldn't produce sparks due to location. 🔥 This is very basic mechanical knowledge. Other then that it turned out nice. Im going to make the whole tool from scratch.

Great advice as always, have a similar job today - not a light mod but need to reflow the solder in the instrument cluster.

Thank you!!! Helped me a lot. Just brought the same knobs from AliExpress. The Brazilian fiesta is a bit different, but your ideas will work well

How much fabric did u purchase to do all of it

very poor job