Is there a particular reason why you don't screw in your ignition coils? Wouldn't that help with the spark plug issue?

I heard the dorman intake kills power??

Best fix for an idiot light is a sticker that covers it 😂

White vics only have that paint issue

Good job, how is it holding?

I would NEVER buy a bike from Amazon. Their shipping charge is ridiculous.

the biggest issue was nobody serviced the the auto so it gave up after 200k

Don't forget about the door mechanism...mine had broken 2...and replaced trans...and abs light is now on...smh... love my vic though

Replacing the hvac blend door module, don't break it out. Remove, glove box, pass air bag, trim piece, radio, hvac control head, lower dash bolts on either side of the trans tunnel, the trim piece at the defrost vents and their screws. Then on the pass side remove the main dash bolts and you can pull the dash out about 3 inches. From there, you can get an 8mm gear wrench or 1/4 drive ratchet on the bolts. When installing the new the module. Put the rear most bolt in most the way, notch the bolt flange on the new module, slide the new module in, then tighten the rear most bolt. And install the two remaining bolts. Don't break, things, I've seen the air box break trying to half ass it and then your replacing the whole hvac system.

For the HVAC controls its better to leave it set on Mix, fan on Med/high and control the temp with middle dial, furthermore the dashes on these roll forward towards you, you dont need to "remove" the dash

Got one a year ago. Install a Keihin 32mm carb, main jet 105. High flow Uni air filter and racing CDI. Fabián mecánico has a KZbin vid on how to install a racing CDI. That thing flies

bro very nice job nice tips.....

To recap, what is the repair needed now? New heads? Machine shop?

Great video on a hard to find subject,

Man, this is exactly what I'm looking to build on the side of my double-wide home, my intention is to put a roll-up garage door front on it...

Great job l am 64 female already build decking stairs now the roof thanks appreciate your video advice what mistakes not to make

I like our Toyota Camry 1998 V6 3.0, because it does have 2 tow hooks on the bottom, yes, I have to fix our head gasket next week, I just replace battery and alternator 2 weeks ago.

Is there a faster way than this? So far this seems way better than most other videos.

BRAVO! Excellent walk through. Thank you brah' 🔧

Thanks for the video. Horrible design, but I'll get it done!

Great job. Only thing I'd added was some gutters. Then could collect water for your garden. Otherwise great job

I have a crown Vic and she is a beauty, I’m 19 and she is a eye catcher for sure. I have had only a hand full issues but it is my baby and has out lasted all of my parents cars. She is a 2007 Crown Vic, police interceptor. Definitely my favorite car on the road

I'm in the PNW too. I wonder how long that wood will last

These engines are notorious for bad valve seats on 3.7 4.7 5.7L engines.

Beautiful, Thank you for your time.

If could let me no what kind of pining gear set do you have in roscoe in your vic my friend love you're videos anyway I want to build a bad ass rear 😊

Very helpful, thanks man 💪🏼🇺🇸🇮🇹

MY DADDY OWNED A 1999 GRAND MARQUIS THAT CAR LASTED 24 YEARS 😔😔😔 NO RUST STRONG SEDAN BRING BACK SEDANS TO MANY TRUCKS

I just replaced the intake manifold and people say the Dorman brand isn’t as good as the OEM but honestly it still drives and runs good and my mechanic made sure it was bolted on good and properly and it drives better now actually to be honest

I guess I'm just unlucky with the 68k mile car with the broke flex plate

My 4.6 2002 came with the older intake. Loss of coolant by thermostat. Changed it to a Doorman, lasted a year or so. I recently opted for the Ford intake, yes more expensive but so far , so good. You can tell right away the difference in quality and it comes with other bits. My heater core has also broken and it still is. Getting in there requires the whole dash to come off. Thank you for upload.

i thought plug issue only affected up to 02 models?

Thank youuuuuuuuuuuu!!!!! - a daddy's girl who can change a tire but never really had to bother with lights ♥

This isn’t a fix this is an error on your parts when, people are going through hell with this problem and most common suggestions is crank sensor a short dirty bad grounds not forgetting to hook them up !

You are A GREAT DAD!

Yeah my 2005 grand marquis just gave out with its break lights, they are on, but when aachually using the breaks don’t flash. Aswell as my hear and ac unit don’t work, the blower might be out cause I fixed my vacume valve, but I still have no air, and I can’t find a fix

Can you do the same concept for a 2000 cadillac escalade?

Woah beat it off

Gotta wait for the weekend to give it a go, will def come back to report!

I have a black 99 lx civilian that i put cop car wheels on becuase one aluminum rotted from road salt and a replacement was 280 bux. Instead i bought 4 new cop car ones for 88 bux,each. I get harrassed all the time by jap car punks riding my bumper and trying to cut me off. These old cop car looking vics really get there hatred goin

That was an awesome video. I learned somethings from you. Great explanations and tricks

I’m having coolant issues on the intake manifold on my 2008 ford crown Victoria this gave me some relief 😭

Rain water run off gonna flood neighbor yard. U have to control your water. If y didn’t get a permit insurance might cancel you

nice.

Damn good job!!!🤜🏿🤛🏿😎👊🏿👍🏿

Did I hear a major Exhaust leak?... You missed something. That engine should not have sounded that bad. Torquing from outside to inside could have done damage, too...

I've done Timing jobs on 1996 to 2001 Camry's, and the most aggravating part is the Power Steering Pump. Getting the Belt tight enough without it being too tight is a trick. Sometimes i had to go back in to tighten the Belt more, but a couple of times i got it on the first try.

I gotta do this for my lady's car. She has a 2001 Camry 2.2 as well. And don't worry about if you got your points across to everyone. I (and anyone else that knows something about automotive) understood you perfectly. But you are supposed to start in the middle and work outwards when installing. I'm going to find your next video now. Thank you. 🔧🙂👍🏻

my 09 has 209k miles and I have had none of these issues yet, been driving it for 8 years now, only issue i had was coolant leak at the thermostat housing, had to take that manifold off and seal the entire thing, luckily my brother helped me out, we did it in 2 hours but he knew what he was doing so it helped alot with speed

Was you speedo accurate still