Would this fit into after market rear control arms I have Megan racing

My GS wont work eventho i did this. My vsc still on warning light. Any other idea

Move the door panel you were in the way of taking the clip out of the door handle on the inside. When you're doing these little detail task on KZbin you have to show that kind of stuff or else we're just going to be lost

Do you hear a buzzing sounds

My 400 has 3 abs codes and their driving me crazy. The main problem is that the speedometer stopped working out of nowhere yesterday. I got codes.. C0210 Rear speed sensor rh circuit C0215 Rear speed sensor lh circuit C1213 ABS control system malfunction

Cheers mate

still have the rca?

I just changed the actuator in my right rear door. You don’t need to screw off the door handle. There is a tab (spring mechanism) at the back of the actuator apparatus. You just need to put your hand in there and press the tab while working out the actuator lock assembly. Putting it back in is easier. Just do the reverse. But great video. This helped a lot. You also dont need to remove the window track.

Im wandering if the yaw sensor is whats tolling me in my aristo. The abs motor and accumulator work but i keep getting a abs light and buzzer. I did a tcs amd vsc delete years ago so maybe a wire is grounding put also. Thanks for the video.

OMG, what unnecessary electrical functions. i use my fingers to lock from inside and key to unlock from outside.

Great job. Where do you live? Do you so side jobs

I realize this was 3 years ago.., but I’m trying to do this install right now and I thought I had a pretty straight forward install! But when I go to lock the door, it feels stuck. Even if I try to lock it manually, it feels like it’s going to break something if I keep turning the key. Any idea where I went wrong??

Where you at bro?

I checked mine and it doesn’t have the white box to put the paper clip in

Hi friend, how are you, can you help me? I have a Gs400 I have the abs problem, my car has 32,000 km, I'm in Brazil, I've already passed the VCDs and the vacuum solenoid is complaining and a whistling sound started along with the engine. can you help me

Door actuators are definitely a pain in the ass 😆 🤣

I’m pretty sure the bottle has to be above the bleeder screw

Shut my door it won't open I'm fucked. Got the panel off put my hand in there still nothing works even when I move latches with my hand manually. That door is never gonna open again.

What coils you running bro?

do you know which manufacturer makes the original master cylinder? My 95 Civic EX has aftermarket so I want to replace it with OEM but Honda no longer sells it so I'm searching for the OE maker.

Would this work on a 2008 GS460 just replaced the abs actuator unit didn't use maching to bleed brakes did it manually brakes good lights still on

A simple flashlight would have been very helpful.

I've seen people have problems after installing RCA they can't put 16 inch wheels on LS400 cause steering ball joint contacts inside of the rim. Does that happen to GS?

This video sucks man

My 2007 gs430 had the obdii diagnostic read say there was a right front wheel speed sensor fault. On checking the sensor's connector I noticed it has some vertigris on the brass pins and in the receiving sockets of the plug. Cleaning those terminals cleared the fault.

An abs light will not make your breaks fail man

I cannot get that actuator back in for the life of me

My 98' lexus ls400 currently. I have came to a few conclusions. Based on forums and from my personal experience it is said to be the wheel hub sensor(s) and can be the speeding sensors on the transmission. Also have problems with my PNP) switch.

Wow these shits got expensive in the last 2 years

How to pix it ls400 yr2000 I change alternator and battery! Still draining my battery!

I like it, the tape idea yea !

Installing rca will it put less stress on the lower ball joints ?

My 2005 rx330 thunderbolt edition these lights came on this morning so I unhooked battery cables and hooked them back on lights went out but was making a sound and idling rough got to looking and it was out of coolant put in the coolant and back to normal I'm wondering if that's what made the lights come on to begin with it was the check engine light and traction off light that was on

Hey so I switched my actuator on my front pas side door, but it still struggles to lock, any ideas why this might be happening?

Awesomeness

Execlente

Thanks for the video! I have a 3rd gen GS430 and my brakes hardly worked (no assist) after replacing front rotors & pads, and all those lights were on. This is how I fixed it: 1) Put car in accessory mode. To do this on this car you must shift to neutral while engine is running and then turn off car. Use the shift lock to move shifter to Park (P). You may have to hit start button one more time to enable accessory mode. 2) Insert paper clip jumper between slot 4 & 13 3) Lightly pump brakes quickly at least 4 times (I did 8 just to be sure) within 5 seconds. You don't have to push it to floor each time, just enough pressure that it would activate the rear brake light. 4) Shut down car and remove clip. 5) Do a regular start and lights should be gone and brakes should be working!

Hella old but u didn't have to removed the bolts. Just use the flat head to slide the tab down and you can remove the strut

Will this works on 2004 lexus es330?

How did you know which sensor was bad??

I have a 99 GS300 and your method didn't work for me. Putting in the paper clip did nothing to my lights (the lights did not react, did not blink). Any suggestions on what I should do?

Replaced the front driver's actuator on my 2000 GS300 today. What a tedious process. :(

What's your IG would love to see the GS

Lmao you showed the after pic for 4 seconds !!

Sell both and get the dream car. Dream car content with no debt lol

What size wrench?

*VIP in the Japanese car seen is pretty much a sedan that's fit for a diplomat. Hence the privacy curtains, ride quality, and is customized to the comfort of the driver/passenger*

What car is this mc for? And is it an abs mc?

Working on a guy's 2008 Lexus GS 350 all those lights came on and there was no power steering and I basically have to just take a little lost and give him back his car so he can take it to the shop I changed all four wheel bearings all four struts all four wheel speed sensors, rear pads oil pan gasket transmission screen fluid and filter thermostat and coolant flush and cannot get those lights to go off with my scanner.

Did the rca add camber or take away ?