2 ай бұрын
5 ай бұрын
Жыл бұрын
Жыл бұрын
Жыл бұрын
Жыл бұрын
Пікірлер
@DKshitblast 2 күн бұрын
microcenter sells a powerspec prebuilt with this case right now on sale for 690$ 5800X3D RX 7600 16gb ram 500g ssd 650W I had bought one for 700$ awhile back and added another stick of 16gb, and I just put in a RX 7800XT, depending on what i can sell the 7600 for it might end up as 1,000 in total.
@calmhorizons 3 күн бұрын
Nice video. Subscribed.
@poweredbychris 2 күн бұрын
@@calmhorizons thank you!
@TheBriti5hNoob 5 күн бұрын
is it possible to fit an ATX card ie wireless card on this type of build, i don't have a beefy graphics card so assuming my 3070 should be okay with enough rom to add it below it?
@poweredbychris 5 күн бұрын
@@TheBriti5hNoob you should be okay. Just to note it could be dependent on motherboard having GPU in first expansion slot vs down one.
@dkat1108 5 күн бұрын
The only issue is the power supply for me mounting so the exhaust fan puts the warm air from the power supply back in the case seems like kind of counter productive to put back warm air from the power supply?
@poweredbychris 5 күн бұрын
@@dkat1108 I get what your saying, but it doesn't seem to affect it all that much. I guess if your maximizing the space and using the highest end parts maybe but even still. I figure if you find an aftermarket front panel that allows airflow you could flip it so it's in taking in fresh air
@madladdan 8 күн бұрын
No filters?
@j_crust4582 9 күн бұрын
Best case would be the jonsbo z20
@gamingplaylistsp 9 күн бұрын
i love the music can you tell me what it is and seriously awesome job i love your channel!
@poweredbychris 8 күн бұрын
@@gamingplaylistsp thank you I appreciate it. The music is from epidemic sound. It's underground moments from cushy
@gamingplaylistsp 5 күн бұрын
@@poweredbychris thank you man! Your channel is insane! Keep it going bro much love!
@monikaw1179 10 күн бұрын
One of my favourite cases of all time. The new 2024 version just doesn't look as good sadly.
@Qwhx123a 13 күн бұрын
Why are the exhaust fans on the bottom?
@poweredbychris 12 күн бұрын
@@Qwhx123a they are intake not exhaust.
@Qwhx123a 12 күн бұрын
@@poweredbychris my bad
@PiersOgden-g1p 15 күн бұрын
the emerald green on the gpu is so tuff
@kalebdeason7319 17 күн бұрын
Same case/cpu cooler. Are your CPU fans backwards or did I install mine wrong? Mine go clockwise and kept stock Air 100 fans counterclockwise. Thanks!
@poweredbychris 17 күн бұрын
They come pre-installed and are in the correct orientation
@abel6575 17 күн бұрын
How about temperatures? I like that cooler for a 5600, I imagine it will be enough.
@poweredbychris 17 күн бұрын
@@abel6575 yes it's enough for that cpu
@veggie_cream1628 18 күн бұрын
How about the CPU air cooler? Have the fans you installed been enough for your composition? I see that it is not too big compared to other compositions I have seen.
@poweredbychris 17 күн бұрын
@@veggie_cream1628 it's more than adequate for a 7500f
@itstoufique47 19 күн бұрын
Nice wipe @4:38
@poseidon1038 19 күн бұрын
I am confused.... Why did he use AM4 CPU cooler backets when the Ryzen 5 7600x is an AM5 CPU???
@poweredbychris 19 күн бұрын
@@poseidon1038 because it's the same.
@mansurern5023 22 күн бұрын
How are the temps pf the gpu? Does it overheat due to the small space that it has?
@Geographyball1 24 күн бұрын
Does the h5 flow normal version come with the two front fans?
@poweredbychris 24 күн бұрын
@@Geographyball1 no front fans
@stefan7869 28 күн бұрын
Great Video. Are the front fan and the exhaust fan alreqdy installed in the case or do I need to buy them extra?
@poweredbychris 28 күн бұрын
Thank you. This was the non rgb version. It only comes with the exhaust fan and the bottom angled fan. I purchased the 2 front fans
@stefan7869 28 күн бұрын
@@poweredbychris Thanks, does the rgb variant come also with the two front fans?
@poweredbychris 28 күн бұрын
@@stefan7869 yes it does
@stefan7869 28 күн бұрын
@@poweredbychris Thanks
@thundridical5728 28 күн бұрын
Are these the stock fans? Can I put in in single colour only?
@poweredbychris 28 күн бұрын
@@thundridical5728 they are addressable RGB, so yes
@melissafordres1470 29 күн бұрын
5788 Graham Brook
@nicohess442 Ай бұрын
Gat him to 10 k in one weej
@hoijamm Ай бұрын
no support bracket for the gpu?
@poweredbychris Ай бұрын
@@hoijamm didn't come with one
@hoijamm Ай бұрын
@@poweredbychris can i use arctic p12 argb and connect it directly to the montech rgb hub ?
@poweredbychris Ай бұрын
@@hoijamm yes
@e79905 Ай бұрын
is it not a problem for the PSU to be taking in hot air from the GPU exhaust
@poweredbychris Ай бұрын
@@e79905 I don't think it would get that much of the GPU exhaust tbh since it's the hot air is mainly getting pushed out the back corner Maybe some but also getting some fresh intake as well
@baguetcat4685 Ай бұрын
650W bronze?!!, dont put that, minimum gold
@thezillathrilla6158 Ай бұрын
It’s just the efficiency of the power supply, it will still run the parts perfectly fine
@Boss69292 28 күн бұрын
Efficiency doesn't mean shit
@DiskRan0 18 күн бұрын
@@Boss69292 it will once you start running higher end builds
@DiskRan0 18 күн бұрын
thats a budget am5 build btw so a bronze is acceptable
@Boss69292 18 күн бұрын
@@DiskRan0 no it doesn't lmao the difference between gold and bronze is a few percent and efficiency doesn't dictate how good a psu is
@nikolaizolotov1837 Ай бұрын
Хорошо 👍👍👍
@ShauryaDubey9 Ай бұрын
Nice 🎉
@4NT0N10MZC Ай бұрын
WHY DOES THAT LOOK LIKE AN SGI MACHINE I NEED IT NOW
@snehashishpaul06 Ай бұрын
Watched the full build video, the video quality was awesome, was thinking to buy this case for my upgrade you gave me some assurance thanks 🫶
@realsmugg Ай бұрын
In the website you can clearly see that the fan hub has 4 3-pins connectors. Why is there 6 on this one?
@poweredbychris Ай бұрын
@@realsmugg idk
@jhilldaniel8737 Ай бұрын
hello ilike your build, may i ask why you used 650w while the recomended of the gpu is 700w. pls answer , it helps a lot , more vid .
@poweredbychris Ай бұрын
@@jhilldaniel8737 the estimated power for these system components is 450w
@Games-px3dl 27 күн бұрын
Also the recommended psu is usually accounting that you have the newest cpu with it
@unitedslaysfv2166 Ай бұрын
Random question but how long did it take to build this ? Say for a beginner builder if I follow your guide. Thanks!
@poweredbychris Ай бұрын
@@unitedslaysfv2166 for me, 1 to 1.5 hours. For a beginner, a good few hours maybe. Really depends how mechanically inclined you are. Watch as much how to videos as you can.
@unitedslaysfv2166 Ай бұрын
@@poweredbychris Thanks !
@eugene2036 Ай бұрын
That is a very nice build. I recently picked ip this case and i can not get the daisy chained fans to work. I plug in the power cable to the mobo but only one of the fans spin at a time. If I daisy chain the other way, only the other fan spin. Any suggestions?
@poweredbychris Ай бұрын
@@eugene2036 when it comes to fan power you don't want more than 3 fans to a header
@eugene2036 Ай бұрын
@@poweredbychris It was just the 2 fans the case comes with, daisy chained together, and plugged into 1 fan header. I rgb works for both fans daisy chained but the spin does not. I might have to go back to microcenter just to ask them how to get it to work. I believe i connected them correctly though.
@Respectable-dushe Ай бұрын
W cpu choice I have overclocked mine to mach a 7700 so I could pair it with a 7800xt without a bottleneck
@poweredbychris Ай бұрын
@@Respectable-dushe best value CPU!
@calebintal806 16 күн бұрын
I’m about to do this too, what were your oc settings?
@vAmmonite 10 күн бұрын
not gonna bottleneck anyway lol
@estate-tidus1007 Ай бұрын
I just built on this case as well was decent.
@poweredbychris Ай бұрын
@@estate-tidus1007 it's a solid case for sure
@al01martinez88 14 күн бұрын
Cable management must be a pain in the arse if you have a non modular psu
@poweredbychris 14 күн бұрын
@@al01martinez88 I wouldn't recommend it. And maybe get an sfx or sfx-l psu for more part compatibility
@Fekxyz-gr8hc 4 күн бұрын
@@poweredbychris everything works fine with an atx psu. It's more just that for a. Cable management is harder with an atx psu
@Benggerzen Ай бұрын
It’s 26L, close to the limit of itx matx around 20L. I have reviewed around 20L cases that barely fit a gpu 330mm like my 3090 ti evga and a (140mm) atx psu. But airflow suffered dramatically from my research. This is the best in between.
@poweredbychris Ай бұрын
@@Benggerzen Yes. I would agree. Air flow is pretty good, and you can fit up to a 415mm GPU with an ATX PSU. That is reduced if also using a 360 aio. Then you would have to consider using a smaller psu
@avirtualworld4U Ай бұрын
Just guessing but I believe you had a warped cpu there my man and the contact frame saved your system nice.
@poweredbychris Ай бұрын
@@avirtualworld4U most likey
@Rosaslav Ай бұрын
So you think it is significantly better than even Jonsbo mATX cases?
@poweredbychris Ай бұрын
@@Rosaslav I haven't personally worked in any of the jonsbo cases though I do want to at some point, but it depends on what you value. There are several cases from jonsbo ranging in prices. I think at the 70 price range it's hard to argue against the A3 at 26 ish liters its likely smaller and has more configurability options
@unitedslaysfv2166 2 ай бұрын
Hey, I just got the same case and similar PC parts! My parts haven't arrived yet but I was wondering at 2:26, did the termal paste come from the Cooler? Thanks!
@poweredbychris 2 ай бұрын
@@unitedslaysfv2166 yes. Thermal paste is provided with the cooler
@prodcraiige Ай бұрын
same!
@exoticplays6080 2 ай бұрын
I’m using this cas and looked at 10 videos can’t get power to my fans and every video they skip over the wirimg
@poweredbychris 2 ай бұрын
@@exoticplays6080 I believe they come daisy chained so you just connect the last connector into a open 4 pin fan header on the motherboard. Since the fans are 3 pin you will have 1 exposed pin on the header
@iamme788 2 ай бұрын
I had to take the two screws out to detatch the riser cable to get this to fit, did you have to do the same?
@poweredbychris 2 ай бұрын
@@iamme788 yes
@davidlomax7303 2 ай бұрын
Help! Trying to build one but can't find an LGA1700 COOLER which will fit under that drive tray. Which noctua is that - looks like a 95mm?
@poweredbychris 2 ай бұрын
@@davidlomax7303 really glad you asked. My next vid is coming back to this case. The cooler is the NH-L9x65. You will need to purchase an LGA 1700 mounting bracket
@avirtualworld4U 2 ай бұрын
Just picked one of these babies up with walnut wood $105 from Newegg be here few days so looking forward to building in it as I have been searching for two years for the ONE. I am going to go slow using my 7 P's= Proper Prior Planning Prevents Piss Poor Performance. Update parts arriving today 9/4/2024 be built by weekend looken groovy.
@poweredbychris 2 ай бұрын
@@avirtualworld4U you won't regret it. Such a good case
@kapys1722 2 ай бұрын
How about using a 240mm AIO? Will it hurt the airflow and cause temperature spikes?
@poweredbychris 2 ай бұрын
@@kapys1722 No it will not.
@jerksquatter 2 ай бұрын
Excuse me, who are you? Why do you only have 905 subscribers? Well now its 906! Great quality video!
@poweredbychris 2 ай бұрын
Haha. Thank you. I am just a guy. Still slowly growing so I have no complaints. Just doing this for fun as well on the side, but I appreciate the support.
@Kenny_Edmonton 2 ай бұрын
I have an Inwin A3 case but I’m struggling to fit a card over 340mm, this case will fit a GPU up to what length? The power supply I’m using right now is an EVGA G6 750 will that also work?
@poweredbychris 2 ай бұрын
@@Kenny_Edmonton max GPU length with your PSU mounted at the highest position is 415mm. That length is reduced if you use a 360 rad
@piterplichta677 2 ай бұрын
too bad the case is so long
@ariasabe 2 ай бұрын
Bruhh 😪
@ZachsTechTurf 2 ай бұрын
Dope video. Really love the production quality man.
@poweredbychris 2 ай бұрын
@@ZachsTechTurf Yo Zack! I really appreciate that man. Love your work.
@drehitwari7143 Ай бұрын
Dude I love your videos please make a budget build with this case plsssd
@poweredbychris Ай бұрын
@@drehitwari7143 thank you. This is somewhat of a budget am5 build. I might try for a other budget build
@Crusher91 2 ай бұрын
very neat build and editing
@poweredbychris 2 ай бұрын
@@Crusher91 Thank you. Much appreciated
@Lukastad. 2 ай бұрын
@@poweredbychris With all the stuff going on with intel and the instability issues should i still be buying a i5-14600kf or will it not work? thx in advance
@poweredbychris 2 ай бұрын
@@Lukastad. Can't really answer your question as I don't have any experience with 13/14th gen. If you prioritize gaming then get an And x3d chip. If you prioritize productivity/multitasking go Intel. If you end up going with Intel, make sure you update to lastest bios and use a retention bracket. Gl
@Lukastad. 2 ай бұрын
@@poweredbychris Thx aton
@bumbeelegends7018 2 ай бұрын
Super clean
@royvip3061 2 ай бұрын
Did you get a fan controller for all the fans? If yes, which one you bought?
@poweredbychris 2 ай бұрын
@@royvip3061 no controller. All fans were daisy chained and controlled via motherboard software
@royvip3061 2 ай бұрын
Thanks bro great video