Пікірлер
@Notwokeever 45 минут бұрын
do you need to have an ARGB header, my MB doesn't, like can it still function as a cooler if a dont connect it for RGB
@PhotonReceiverAstrophotography 5 сағат бұрын
buying this board merely for the fact i could run a pi off usb due to that lower pci style conncetor supplying 27w to the front panel
@Car4KS Күн бұрын
Wow❤
@dmax7400 Күн бұрын
VERY Informative especially with the diagrams showing where stuff is! Thank you!
@jek230 Күн бұрын
I have this mobo and a r5 7600, can i upgrade to a 9800x3d with no issues? The vrms can handle the 9800x3d?
@ALKtech Күн бұрын
Yup this board should handle a 9800X3D just fine - what CPU cooler are you intending to use?
@jek230 Күн бұрын
@ALKtech im planning to upgrade to an aorus waterforce II x360. Its fine?
@Ben-ld1qi Күн бұрын
I've used KingBank 6800 2x16 and 2x24 kits since they're best bang for the buck to get Hynix A-die chips which are hella overclocking chips. On AMD B650 with 7900X3D I was able to get 6400 CL28 in 1:1 fully stable without any active cooling and 8000 CL34 in 1:2. If you want to just set and forget then the 6000 CL30 and 6000 CL32 kits are fine, but they are Hynix M-Die chips and are a bit limited in overclocking, they struggle to hit higher frequencies and error out at lower voltages already compare to A-die. If you want to set manually then get 6000 CL28 / 6800 CL34 I don't see any point in paying extra for the 7200 and 7600 KingBank kits. It's a shame tho that where I live it's very difficult to sell KingBank 2nd hand. Somehow every buyer says they are cheap "Chinese" RAM and they are bad RAM. They are clueless these are Hynix chips inside. Who gives a crap if the heatsinks are Chinese made lol, the chips matter the most. And to be honest the KingBank heatsinks, the white and black ones with stripes and the black one in this video all look quite alright, they are definitely not ugly heatsinks.
@Punkhunter25 Күн бұрын
Thank you for making such a thorough video. I just got this board. It's not exactly the board I wanted, but it will surely do the job. I got it because it was bundled with a 9800X3D at msrp.
@ALKtech Күн бұрын
Hope this video helped your build in some way - have you already put together your PC with the 9800X3D yet? Given the specs of this board, it should get the job done without any bling and fuss with a 9800X3D!
@gamingfromjohnwayne 2 күн бұрын
I got this board bandnew for 160 and dam im loving it😊
@ALKtech 2 күн бұрын
That's a steal! I assume it's US$160? How did you manage to snag it at this price?
@VNAV_PTH 3 күн бұрын
Very good overview.
@Panssari_Make 3 күн бұрын
Work ryzen 9000 series ?
@ALKtech 3 күн бұрын
Yup it works with the Zen 5 Ryzen 9000 series - you may have to do a BIOS update to enable Ryzen 9000 support if the board you purchase is old stock that might have an older BIOS that only supports Ryzen 7000!
@D3K018 4 күн бұрын
I was looking desperately for the last M2 ssd port... 😅 Thanks for the guidance!
@ALKtech 3 күн бұрын
Glad this video helped! Are you building a white-themed PC?
@D3K018 3 күн бұрын
@@ALKtech Not really... 😅 I kept my old case and replaced the motherboard, processor and RAM, might buy a new case soon tho, a white theme sounds like a good idea!
@miyuxv 4 күн бұрын
my front 2 fans aren’t working anyone help me?
@ALKtech 3 күн бұрын
Were they working previously? Or did you only realise that they do not work after assembling your PC? If they stopped working out of the blue, it could be the fan/RGB hub that you connected them to that is faulty, or the fans themselves are the issue...
@jaxsononpc 4 күн бұрын
Hello Friend, I think for future videos color code the different fan's
@ALKtech 3 күн бұрын
Good suggestion, thanks for this!
@juandeagle7320 5 күн бұрын
one of the best reviews I've seen so far, got to give you my compliment
@ALKtech 5 күн бұрын
Much appreciated! Are you looking to build an Intel 12th/13th/14th Gen PC?
@juandeagle7320 5 күн бұрын
@@ALKtech 12600k and I wanted a review on the mb before following with the purchase.
@hairchasers69 5 күн бұрын
Is this the only AM5 mini ITX motherboard with a low-profile VRM heatsink? I'm looking for a mobo with the lowest height.
@iain8837 5 күн бұрын
Bought this, has a small graphics error on the large M2 cover. Not worth RMA for that, but looking for someone that would be willing to sell this part and ship to Germany (eg if the board was never to be found again). Let me know if you are interested. Thanks
@ALKtech 5 күн бұрын
Damn, was something misspelt? Or is some part of the print totally off, like misalignment or something?
@iain8837 5 күн бұрын
@ MSI PERFORMANCE GAMING, on the large M2 cover is missing the word gaming, or is mostly faded away then the last letters are missing.
@ALKtech 3 күн бұрын
@@iain8837 damn. have you tried writing in to MSI or your retailer to see if they'd be able to ship a replacement M.2 heatsink, without having to RMA the entire board?
@Hell4Gamers 6 күн бұрын
Great work braking this down. I've been reading manuals and eatching videos and this is the most comprehensive video that matches all my notes. I am looking forward to checking your other videos for Strix E and Hero x870e boards. 🤞
@ALKtech 5 күн бұрын
Much appreciated and glad you found this video useful! Are you looking to build a new AM5 PC for gaming perhaps?
@Hell4Gamers 5 күн бұрын
The old 3950x on a x570s Master is turning into a gaming server/media PC. You might be interested in looking up my studio setup on my channel, 9 months work and 100s of hours, but only $500. Greater detail on my discord of the build process. But HEY, it won second place in a contest with over 50,000 entries with govee and razer. So I did something right. lol New 9800X3D build Dominator Titanium SK hynix 2x24GB looking at the Asus Hero x870e. I'm a hobby overclocker with some personal bests under my belt like samsung B die @Cl 12 24 24 28 and my kids 8700k has been all core locked at 5.2Ghz for about 6 years and still happy. (Thanks silicon lottery), so I'm looking forward to toying with the hero for sure. Thanks for your videos on that. Never considered it till I found out Asus has student discount and price matching. 😅 still expensive, but it will be an investment in personal entertainment. lmao
@cavitycreep 6 күн бұрын
Can I run 4 sticks in this board?
@ivan2152 6 күн бұрын
Hi dude, can you help me please ? Is ryzne 5 5600 with rx 6800 xt good combo ? Btw great video.
@ALKtech 5 күн бұрын
Yup a 5600 will pair decently well with a 6800 XT for a 1440p gaming rig, though if you wanna get the most out of the 6800 XT, you might want to consider something like the 5700X3D! Are you already using an older PC on the AM4 platform? Just wondering why are you considering a build on AM4 since it's an EOL socket!
@ivan2152 5 күн бұрын
@ALKtech it's like, with everything 200$ cheaper than am5 so..
@ALKtech 3 күн бұрын
@@ivan2152 fair enough - not sure how's the used market like where you're from, but if budget+upgrade path is one of your considerations, perhaps you can look at getting a secondhand Ryzen 5 7600 and a B650 motherboard!
@KeyframeChopper 7 күн бұрын
Excellent video! It helped me a lot to decide on my next motherboard. Thank you so much!
@ALKtech 7 күн бұрын
Glad you found this video useful! What are the specs of the PC that you'll be building?
@KeyframeChopper 6 күн бұрын
@ALKtech So far it's the following - AMD Ryzen 9 7900 - Noctua NH-D15 - Corsair Vengeance CL38 - Kingston SSD M.2 Fury Renegade - Corsair RM850x And an underused Radeon RX 5700 XT from my old build in a h7 flow case.
@ALKtech 5 күн бұрын
@@KeyframeChopper cool, I don't suppose you'll be gaming all that much on the PC eh, more of productivity work?
@KeyframeChopper 5 күн бұрын
@@ALKtechIndeed. Mostly creative endeavors and work with a little gaming haha
@hi-rw7ep 8 күн бұрын
How many ssd slots can i put including the m.2
@ALKtech 7 күн бұрын
The board comes with two M.2 slots and four SATA ports, meaning you can install two M.2 SSDs and four SATA SSDs for a total of six drives!
@GetRocky 8 күн бұрын
Thank you, perfect video I was looking for to reference during my build with this MB..great job!
@ALKtech 8 күн бұрын
Glad you found the video useful! What's the specs of the PC that you're building with this mobo?
@mohammadthaqif3870 8 күн бұрын
May I ask, can the vibration from the cooling fan effect, or maybe broke the internal stuff in my modem or router??
@ALKtech 8 күн бұрын
Your modem/router shouldn't have any moving parts so it shouldn't be the source of the vibration - have you checked if the cooling stand's fan screws are secured properly?
@mohammadthaqif3870 8 күн бұрын
@@ALKtech sorry, I mean, can the fan vibration (which vibrate when switched on), affect (broke or make something internal loose) my modem and router. I am sorry if my question was confusing.
@ALKtech 5 күн бұрын
@@mohammadthaqif3870 ah I see! No worries, the fan won't generate that much force to cause damage to the router - you'll be 100% fine! In fact, the fan is pretty quiet and there's barely any vibration at all...
@mohammadthaqif3870 4 күн бұрын
@@ALKtechohhh, okay now I get it. Thanks, so much for the info. Thanks
@kephalai 9 күн бұрын
probably dumb question - but does this motherboard need a wifi & bluetooth antenna? i'm not able to see any devices when i turn on my bluetooth also cant see any wifi
@ALKtech 8 күн бұрын
The included antenna is an all-in-one type for both WIFI and Bluetooth - have you installed the latest WIFI and Bluetooth drivers from the MSI website?
@_Aurelius_ 9 күн бұрын
First time buying anything from Gigabyte and the card was defective xd
@ALKtech 8 күн бұрын
Oof. Hope you managed to sort it out with the retailer you purchased the card from for a replacement!
@diegoorozco3032 9 күн бұрын
I want to buy the Aorus Master, but I'm not sure if it will fit in my Lianli Dynamic Mini case. Does anyone have that aorus master in a small case?
@OG96932 10 күн бұрын
can i use 7000 ddr 5 memory
@ALKtech 10 күн бұрын
Yup you can!
@TomerMakhliankin 10 күн бұрын
How is b650m d3hp compared to this?
@ALKtech 10 күн бұрын
It's a lower-end offering than the B650M DS3H in this video, with a weaker VRM, heatsink coverage for just one M.2 drive, and no USB 3.2 Gen 2 support!
@gamesplayer4861 11 күн бұрын
Master 4080 Super
@Paraclef 11 күн бұрын
Very nice video, thank you.
@tel8. 11 күн бұрын
how can i change the rgb lighting of it ?
@ALKtech 11 күн бұрын
You'll have to download the Gigabyte Control Center app to customise the RGB lighting effects!
@tel8. 11 күн бұрын
thanks brother! appreciate it
@straaaax 12 күн бұрын
Is ot 12+2+1 or 14+2+1 or 16+2+1 vrm? I'm finding different information 🤔
@StableHexic 12 күн бұрын
will ryzen 5 5600x work out of the box?
@ALKtech 12 күн бұрын
It should, unless you're buying super old stock that's been sitting on the shelf since it launched some years back, or buying from someone who hasn't updated the BIOS at all since purchasing it! In any case, the board comes with the Q-Flash Plus feature that allows you to update the BIOS without installing a CPU/RAM/graphics card, so at least that's something you can fall back on if indeed the board you're getting has a super old BIOS revision that doesn't support the 5600X...
@rolle3813 12 күн бұрын
No HDMI??? seriously?
@ALKtech 12 күн бұрын
Seems to be a thing with Gigabyte's Z890 motherboards actually, for some reason they don't come with rear HDMI ports...
@superdooper6969 13 күн бұрын
the heatsink shrinked at least 30% from previous generation
@ALKtech 13 күн бұрын
Cooler Master does have the larger Hyper 212s still, just that they've expanded the range quite a bit to include slimmer offerings such as the Halo Black in this vid!
@KimDM1337 13 күн бұрын
The RAM is not on the Asus QVL list , But i bought one of them... i hope that work well...
@ALKtech 13 күн бұрын
DDR5 as a platform has matured quite a fair bit over the past two years...as long as you've got the latest BIOS, you should be good to go! Which motherboard model will you be using the RAMs with?
@KimDM1337 12 күн бұрын
@@ALKtech I use ASUS TUF gaming B650 PLUS , Thank you for information !
@ALKtech 12 күн бұрын
@@KimDM1337 no problem, hope the RAMs work great with your build!
@Ben-ld1qi Күн бұрын
ull be fine bro
@DefendYourGains 13 күн бұрын
Can you do a review of the GIGABYTE B650E AORUS STEALTH ICE Motherboard? Stealth builds are becoming more popular.
@ALKtech 13 күн бұрын
Unfortunately the STEALTH isn't available where I'm from (Singapore), perhaps due to the fact that such motherboards with connectors on the rear aren't really taking off here (yet)...but that said, I had a look at the specs - on paper, the B650E AORUS STEALTH ICE does seem to have a good set of features, with Gen 5 support for a graphics card and a M.2 drive, plus a pretty sweet-looking aesthetic to boot! Only downer is the fact that the WIFI 7 module supports 160 MHz channel widths and not the full-fat 320 MHz "true" WIFI 7 standard...
@DefendYourGains 13 күн бұрын
@@ALKtechoh interesting, I didn’t know that about the WiFi. Such a shame it isn’t taking off in Singapore, I have no idea why as they look amazing.
@ALKtech 12 күн бұрын
@@DefendYourGains yeah I do agree these boards look pretty damn clean! I'm guessing we should see more of such boards with the next wave of motherboard releases (perhaps AMD B850 come early next year)!
@kmacslv89 13 күн бұрын
I'm building a PC, I would like to know if this board supports a Ryzen 9 7600x + a video card Arc A770?
@ALKtech 13 күн бұрын
Yup it'll support a 7600X and Arc A770 with no issues!
@kmacslv89 13 күн бұрын
@ Thanks, it got confusing because the video says it doesn't work well with the X series. Another question, do you know if a K620 air cooler is enough to cool the Rayzen 9 7900x processor?
@ALKtech 12 күн бұрын
@@kmacslv89 AMD designed the A620 chipset to be targeted at non-X processors, but there are lots of reports out there of other users using lower-end X processors such as the 7600X with minimal/no performance loss at all, so you'll be fine! That said, I assume you're referring to the DeepCool AK620? It should handle a 7900X well enough, at least from what I see of its specs on the web!
@vqa33 14 күн бұрын
Video nicely filmed
@vqa33 14 күн бұрын
I like how it feels and looks precious.
@spoke1183 14 күн бұрын
Most features on this board are dead use less. Save your self money and get something in $200-250. Asrock steelseries way better looking.
@KingBankOfficial 14 күн бұрын
Thank you so much for the thorough review of our product! We truly appreciate your detailed insights and feedback.☺
@zerohei6242 14 күн бұрын
how is this one compared to the ASUS ROG STRIX B650-E? i bought the combo deal since that was the only way to get the new 9800x3d. Is it worth swtiching out my mother board or just try to sell this the x870??
@ALKtech 13 күн бұрын
The X870 EAGLE is more than sufficient for a 9800X3D IMO - going to the B650E (regardless of B650E-F or B650E-E) is worth it only if you can appreciate say, better audio, a more blinged-out aesthetic and all that jazz that comes from purchasing a ROG product! I'm guessing the ROG STRIX B650E is gonna be quite abit more expensive than the X870 EAGLE...
@dampish8403 14 күн бұрын
feels like not enough fan headers, might have to buy a hub
@ALKtech 13 күн бұрын
Good thing fan hubs aren't thaaaat expensive - how many fans are you looking at having for your build?
@arnos1028 14 күн бұрын
been pairing it with a 9900x and worked amazing
@ALKtech 13 күн бұрын
Great to hear! Did you do any CPU benchmarking to see how are the scores like versus other 9900Xs?
@Yoogaki Күн бұрын
Does it have any problems? Please answer quick I will get it next month if so.
@Yoogaki Күн бұрын
@@ALKtechDoes this have enough hubs for four Lian li infinity fans? I am rookie when it comes to motherboards.
@Yoogaki Күн бұрын
@@ALKtechand rgb strimmers
@uchihaobito4808 14 күн бұрын
thank you
@alanx2660 15 күн бұрын
Which metel? Back panel
@ALKtech 13 күн бұрын
Aluminium!
@fallingblackshot7992 15 күн бұрын
Quite a underrated ram to have tbh, CL28 6000MHz is definitely hard to find. Lowest ive seen so far is CL32/30
@ALKtech 15 күн бұрын
Yeah totally, especially given their price...the only other DDR5 6000 CL28s that I've come across so far are from Corsair and G.Skill, and they're alot more expensive than the KingBank!
@jessefisher1809 14 күн бұрын
Its not that hard to get cl28. Just got increase the voltage and some other timings to even it out and tadah! perfect marketing number with no discernible difference in performance. Not saying thats what they did here, I don't really know, but its certainly possible. If you want low latency set trefi to 40,000 or so. That will get you way less latency than reducing cl by 2.
@bitterpuppystew 15 күн бұрын
would this be an upgrade from my 2060 geforce gpu? all ive ever known is a gaming laptop 😅im not looking for the best, but i am looking for an upgrade. i rlly wanna get the 4060 bc its the cheapest one i could find; but all this bad talk around the 4060 is really making me nervous qwq
@ALKtech 15 күн бұрын
Hey there, do you already have a gaming monitor that you'll be using with your desktop PC? If so, what's the model and resolution? Also, are you intending to use the RTX 4060 in a new PC build or as an upgrade for your RTX 2060? The RTX 4060 is well-suited for 1080p gaming given its specs, and consumes a lot less power...but my take is that whether to upgrade or not really depends on the types of games that you play, and the specs of your current/future setup!
@Demon09-_- 15 күн бұрын
just ordered these guys on the 11.11 sale for me and a friend. great deal on 6000 cl28 kit with the current sale and discount codes
@ALKtech 15 күн бұрын
Yeah the 11.11 prices are really hard to beat!