Just a quick question, what happens if i swap the oil cooler and place it incorrectly, and start the car, what is the worst scenario

@VWdiesel could I ask if this process works for Volkswagen New Beetle 2004?

What is your oci? And how many miles does your alh have ?

I did this but didn’t pull the needles out. I just sharpied over the immobilizer😂

great video, thank u a lot,wish u all the best

Imagine the thermostat

StopFlo

I’d hate to see the heater core

You seem very knowledgeable. Do you still use the Ross-tech or Odis? I'm new to the Vcds platform but as like other mechanics I stayed away from VW cars like the plague because reg code readers couldn't be of use. Just curious because I currently own vw Tdi and have grown to love them and recently purchased the Ross-Tech.

What if your transmission is off?

I wonder what this guy is doing now

Someone has to invent a better (more acuate) way of adjusting torsion value than bumping it with two metal pins attached two fulcrumed metal pieces or a socket and ratchet on the large cam bolt. Come on

Hi, will VAG TACHO work on 2012 VW beetle ?

22:43 !!!насос не должен двигаться в центральном отверстии кронштейна!!!! Обратите внимание когда он шатает топливный насос!!! Не тот кронштейн для этого насоса, вся нагрузка натяжения ремня грм идет только на три болта а это не правильно! Может быть обрыв ремня!!!

I bought a new fob and little glass transponder. How do I use the new fob and transponder? It'll crank, but shut off after one second.

State of your elbow mate

Where you located

Does the new ECU you installed know your true Vin number without reprograming it? thanks

What belt do you use for the alternator with AC removed

@VWDiesel Thanks for the helpful video. I need to do this for may daughter's car after the dealership was unable to program a new key (original was lost). Your replacement ECU didn't cause the check engine light to come on but ours does along with the airbag light. Any ideas why?

Does anyone know the toque spec for the camshaft pulley?

Same thing on ABL 1.9 engine?

My vcds says Ross tex interface not found all the time

Thanks for the review. Did you took addtional training to use the tool or its kind of selfexplaining the usage of the software

What is the name of the tube you us to pump in the transmission?

Where is part 2- the install of the AAZ? can’t find it? Great video btw- Doing this exact swap at the moment.

Can anyone help me with my tdi 1.9 L tdi governor need for use on circular sawmill ?????? Help needed maintaining rpm while under load !!!!❤❤❤

All in all great video, but doesn't all that turbocharged flame overheat the metal, causing it to degrade/make it more brittle (even if you don't melt it)? Think I'd rather use some mechanical process like a dremel with flexible cable and proper sanding/cleaning accessories...

Hello Brian. I am in need of some help with a 2013 Volkswagen beetle that driving me crazy. Let me know if your will to help me out.

No VCDS? No time to get the laptop out? You can simply point an IR thermometer at the bottom of the ATF sump and the temp is the same as VCDS. I tested this

Hello my friend. I got my ALH (skoda octavia 2002) 10000 km ago and the old owner put 15w40, I put 10w40 and I noticed 8000 km after light smoke coming out of oil dipstick and filling hole. I think 10w40 is too light for the car that's why it smokes! I noticed also some oil on the crankcase breather ends and EGR valve! Engine is runnig very good no problems at all! Please support and advice. what is your oil change interval?

Where do i send unit to delete emoblizer ? Thank you

We're can I get one of the ECU with the immobilizer deleted I am in calf and would like to know we're to get one

А ремень чо без меток?кго пофиг как ставить ?

A '96 jetta came in that wouldn't get out of it's own way. Intake was so plugged only about an inch opening to breathe through. Used a hacksaw blade to scrape the majority of the crud out. It was stiff enough to scrape, and flexible enough to follow the runners. Used oven cleaner, gas grill, and pressure washer to finish it up.

The biggest problem with these transmissions is the valve body. The best thing u can do is put a transgo shift kit in before you even have an issue. People think these transmissions are junk but they almost always fail because the valve body has an issue and people keep driving which ruins the transmission.

Wait why would I need to time my injection pump if I dont move it?

Перакладаць на беларускую мову

In your video you didn't even show the car or state the car that you were working on you just described the transmission no video of the car itself other than underneath

You're very descriptive etc etc but all your videos have codes names numbers digits all this stuff of what types of transmissions. The general person does not know all that information. You should state year make models that your service applies to

I have the same problem can not get new keys to program If you do ecu delete Can you program key fob to remote unlock and lock

Hey ryan can you send me the video on how to change the immobilizer on a 01 vw jetta tdi....

could you tell me where you bought the engine mounts so I could install a 1.9 tai in my 1981 caddy pick up? thank you

Hello...i have a golf 4 with immo off on ECU....can i swap The cluster for other? Or the cluster Will give error?

tanks brother God bless you

If the crankshaft, camshaft and pump have been locked, what is the need for the timing of the pump if its timing was correct before the belt change?

So the only reason i wanted to swap clusters was my speedo needle rests on the fuel gauge needle causing the fuel gauge to display incorrect amount. I see your needle is resting the same way mine is after you put it back together. What needs to be done?

Hello, excuse me, it could be possible to request a technical advice? See I have a vw Jetta MK4 automátic transmission 01M. The car suddenly fails on 3rd shift the check engine light is on. This is at 20/30 minutes to start. After that I normally park the car. Next day I start the car it's normally shifts, low speed no more than 3rd shift, I may clear the check engine light, car works perfectly. In your opinion what's the cause? ATF? shift solenoid? Also this failure started after a bad technician no trusted tune up the car, never gone again. Thanks for your help, I am desperately seeking help. 4 speed gearbox

ANY PAYMENT OR SUBSCRIPTION TO MAKE UPON DOWLAODING THE APP?

Also, where do you get the adapter for teh guage from, do you know what its called?