3 жыл бұрын
4 жыл бұрын
Пікірлер
@windrider2857 11 күн бұрын
Thanks for your efforts, just please try to gave us more details regarding the cleaning products, in our case the Lucas product and the second one about the carburetor cleaner. Have in mind that many of your viewers are possible out of the States. ❤❤
@O.Bey7Podcast 28 күн бұрын
Great Vlog with so much info! Thank you!
@millerfamilyfarmtrust6515 27 күн бұрын
Thank you as these videos are a lot of work to create detailed how to videos. We love good people like you and would love to have you as part of our family. Please subscribe and then let us know once you have.
@abdimohamed2345 Ай бұрын
How much it cost this solar street light thanks
@millerfamilyfarmtrust6515 Ай бұрын
$65....
@courtneyphelps1234 Ай бұрын
I replaced these sensors so many times on my 2013 Mercedes-Benz Sprinter 2500 - I had enough and decided to try your tip. It worked like a charm. Thank you! I used a: 22mm wrench, fuel treatment, carburetor cleaner, and wire brush (to get into the small holes)
@millerfamilyfarmtrust6515 14 күн бұрын
Courtney, Thank you for the contribution!!! We love good folks like you that actually contribute to our family and would like to invite you to subscribe to our family. Let me know once you have. WELCOME!
@timeubank2453 3 ай бұрын
excellent information... I do have a question, I just purchased a 2024 1000R fox live talon. My question is does your talon make a clanging sound between gear shifts? I read on forums thats its normal and the dealer hasn't been any help.
@millerfamilyfarmtrust6515 3 ай бұрын
Good Day Time. No we have no clanging sound between shits but we did put Amsoil in when we did the first service. Did you join our family here on the Miller Family Farm Trust Channel? We would love to have you....
@surfmarko 4 ай бұрын
will this work for a 2019 sprinter van?
@millerfamilyfarmtrust6515 4 ай бұрын
Marko, Thanks for the quesion and yes it should work on your 2019 Sprinter. We would like to invite you to join our family here as we love people who contribute. Please subscribe and let us ALL know how your simply repair goes. WELCOME
@uavscientific 5 ай бұрын
The Lucas oil is designed to break down the carbon in systems when it is mixed with gasoline/diesel, atomized, and burned. It has no effect on parts soaking in it. The only thing that is removing the sensor carbon buildup in this video is a few seconds of Carb Cleaner that is being sprayed into the sensor. Don’t waist your time and money soaking it in Lucas oil, just spray it with cleaner and blow it out with compressed air.
@ikeclanton3901 5 ай бұрын
This fixed the code on my 2017 6.7 powerstroke. The only thing I did different is mixed in a little gas to the injector cleaner as the two are meant to work together so I thought why not. Also I let it soak 48 hours. Thanks for the help!
@nickstolz2698 4 ай бұрын
What code were you getting? I’m getting P2209 and wondering if this might do the trick.
@ikeclanton3901 4 ай бұрын
I was getting P2201
@angelagrayston6220 6 ай бұрын
The fix was done on our van nearly 2 years ago and hasn’t missed a beat since.
@millerfamilyfarmtrust6515 5 ай бұрын
Congratulations Angel! Glad we could save you huge $$$$. We noticed that you have not subscribed to our family here at Miller Family Farm Trust Channel and LOVE people like you that contribute to our family. Please join and then let us know.... WELCOME
@imagesmaydisturb 6 ай бұрын
How long did your NOx sensors work after cleaning them?
@millerfamilyfarmtrust6515 5 ай бұрын
Please see the next comment below for your answer.
@imagesmaydisturb 5 ай бұрын
@@millerfamilyfarmtrust6515 Comments don't load the same for everybody. I see one user has had 2 extra years of life, which is good to know. NOx sensors contain precious metals that degrade over time and can't be fixed by cleaning. That's why I'm asking how long this lasted for you as well. Thanks for taking the time to respond
@millerfamilyfarmtrust6515 5 ай бұрын
@@imagesmaydisturb I sold the SUV about a year and a half after the process was completed. So I guess I can say 1.5 years or more. Does that help?
@imagesmaydisturb 5 ай бұрын
@@millerfamilyfarmtrust6515 Appreciate the info
@millerfamilyfarmtrust6515 5 ай бұрын
@@imagesmaydisturb You so welcome. Did you subscribe to the channel?
@jackpitts5561 6 ай бұрын
Does antifreeze also raise the boiling point for the coolant? What test can you do to see if you need a new water pump?
@millerfamilyfarmtrust6515 6 ай бұрын
Hello Jack, Thank you for the contribution. We see that you have not yet subscribed to our family and we love folks like you that contribute. We invite you to subscribe to the Miller Family Farm Trust channel. Anti-freeze does raise the bioling point and the easiest way to know if you need a water pump is to simply wiggle the belt to the pump and if you notice sloppy play in the pully or water leaking, then you most likely need to replace the pump. You can also take off the cap on the radiator before you start the tractor (make sure it cool) and then let it run for 15 minutes and look for collant flow in the radiator. Let us know how things go and let us know once you have subscribed to our family,
@StarknightMT_official 7 ай бұрын
Hello, Are you interested in testing our products? We would like to invite you to test the Front Windshield for your 2021 Honda Talon 1000X
@curtloehr5673 7 ай бұрын
Followed these procedures and resolved the issue. Excellent advice, much appreciated!
@millerfamilyfarmtrust6515 7 ай бұрын
So great to hear Curt, We would love to have you join our family here at the Miller Family Farm Channel as we love people who contribute. Let me know once you have subscribed.
@xxwookey 7 ай бұрын
It's 5 years later now. I'm wondering how long this fix worked for? Weeks?, months?, years?, still going?
@livingnoise6399 8 ай бұрын
THANK YOU for dropping this great and simple piece of mechanical wisdom!!
@millerfamilyfarmtrust6515 8 ай бұрын
You are very welcome Living Noise. Did you subscribe? We would love to have you join our family.
@Telstar_1 8 ай бұрын
Great work, would this be the same for a BMW E90 2.0 litre petrol? Thsnks.
@jimsmith8387 9 ай бұрын
Where is the link for the moose bed extender?
@millerfamilyfarmtrust6515 8 ай бұрын
Jim, Its in the video description link. Have you susbcribed to our Miller Family Farm Trust channel. We would love to have you!!!
@lyndsayspence378 9 ай бұрын
what would happen if i put a few of these in my small back yard garden and used them for a few extra hours of light in the morning for cloudy days.? or ran them until like noon each day early in the season just for a little extra light
@millerfamilyfarmtrust6515 8 ай бұрын
Hello Lyndsay, Sure these lights are perfect for extra light when it is dark and is really what the are best suited for.... Great Question. We would love to have you join oour family here as a subscriber as we love people who ask great questions and contribute to our family here. Leave a message once you have subscribed. WELCOME!!!
@seajay958 10 ай бұрын
not high enough, 13ft min
@millerfamilyfarmtrust6515 10 ай бұрын
Seagay I agree but the building is only the height it is. Have you installed these types of lights?
@JimmyPeale 10 ай бұрын
Jimmy Peale I liked
@millerfamilyfarmtrust6515 10 ай бұрын
Hello Jimmy, Thanks for the comment and for contributing to our KZbin channel and we noticed that you have not subscribed. We love people who contribute and would like to invite you to subscribe and join our family here at Miller Family Farm Trust channel. Let us know once you have joined us and THANK YOU!
@dianotruckingllc1849 11 ай бұрын
hi there, great video . Will this work on an SCR system? I have a semi 2013 Detroit dd13 spitting out a code for an outlet not sensor.
@100pyatt Ай бұрын
Try it , it's cheap and easy
@jeromegabriel1256 Жыл бұрын
Did u just put it back in while it’s still wet from the carburator cleaner? And how long did it take for it to be faulty again?
@millerfamilyfarmtrust6515 Жыл бұрын
Good Day Jerome, Thank you for your message and for contributing to our channel and our family here. We love folks who contribute both questions and comments as it is for our entire family here on the Miller Family Farm Trust Channel. We noticed you have not subscribed and would like to personally invite you to subscribe and becone a part of our family. We allowed the sensor to dry for about an hour before putting it back in.... Let us know once you have subscribed. Thank you
@terrellscaife2411 Жыл бұрын
So how often do these need to be replaced?
@xxwookey 11 күн бұрын
Mine failed when the car was 7 years old. I think that's fairly typical. They are expensive enough that it would be nice if they lasted a bit longer.
@marcinrakowski8171 Жыл бұрын
I can not find super tech carburetor and air intake cleaner. What else could I use to spray the sensor after soaking it in Lucas injector cleaner please ? I mean a diesel engine ?
@millerfamilyfarmtrust6515 Жыл бұрын
Good Day Marcin, Thank you for the question. Any Carburetor cleaner will work. We see you havent joined our family here at Miller Family Farm Trust and we would love to have you subscribe and be part of our family here. Let us know once you have subscribed. WELCOME
@marcinrakowski8171 Жыл бұрын
It is done. Thank you for your replay.
@millerfamilyfarmtrust6515 Жыл бұрын
Welcome Aboard Marcin, We are proud to have you join our fmaily. @@marcinrakowski8171
@shawny2023 Жыл бұрын
very useful video. Great
@millerfamilyfarmtrust6515 Жыл бұрын
Good Day Shawny, Thank you so much for the acknowledgements. We are pleased that you found our video useful. We noticed that you have not joinned our famiy here at the Miller Family Farm Trust channel and would like to invite you to join Levae us a message here once you have subgscribed. WELCOME
@TurboDieselFury Жыл бұрын
Pro Tip...you should have pre-spun the sensor in the opposite direction, the same number of turns it takes to tighten the sensor. By doing so, the sensor wiring will not end up all twisted up.
@snatchwars 4 ай бұрын
Or just connect once you've turned it in ?
@millerfamilyfarmtrust6515 14 күн бұрын
THANK YOU TURBO DIESEL FURY, Thank you for the contribution!!! We love good folks like you that actually contribute to our family and would like to invite you to subscribe to our family. Let me know once you have. WELCOME!
@IRFAN.Ç.76 Жыл бұрын
It's a real shit construction from Mercedes. Has someone fix the error P229F ? Thanks for the video.
@kk-yz3vj Жыл бұрын
If you ask me this is a laid of pish from merc. Emissions this and that m. Just another way to fuck over the consumer
@daisyhenry332 Жыл бұрын
Do you know if this was work on a 2013 VW touareg tdi
@millerfamilyfarmtrust6515 Жыл бұрын
Good Day Daisey, It could work on any diesel engine with sensors error codes. We noticed you havent subscribed to oru channel and would l9ove to have you join our family here at the MILLER FAMILY FARM TRUST CHANNEL. Please subscrive and then let us know once you have. WELCOME
@alexkosta1056 Жыл бұрын
What about a C200 coupe 2016 (PETROL)?
@millerfamilyfarmtrust6515 Жыл бұрын
Good Day Alex, It could work on any engine with sensors error codes. We noticed you havent subscribed to oru channel and would l9ove to have you join our family here at the MILLER FAMILY FARM TRUST CHANNEL. Please subscrive and then let us know once you have. WELCOME
@Demirbeg Жыл бұрын
Thanks for the video. I just watched for my problem and believed most of peoples saved thousands of dollars or any other currencies... Do you have any estimate driving time after the cleaning sensors please? Many thanks again 🖐️
@millerfamilyfarmtrust6515 Жыл бұрын
Good day @Dmirbeg Welcome to our family, we have noticed you have not subscribed to our channel and we love people like you that contribute valuable comments and questions for all of our members. Please subscirbe now and then let us know as soon as possible. As far as your qustions goes, we are not sure exactly what you are asking. Can you please be detailed in your question and we will do our best to give you a detailed repsonse. Welcome to our family.
@Mikemehow Жыл бұрын
Will this sensor cause engine light to come on ? Thanks
@millerfamilyfarmtrust6515 Жыл бұрын
Yes Mike, these sensors do cause the engine light to come on but you can take your vehicle to your local parts store and have them run a FREE diagnotic on the engine to dtermine if it is a sensor issue. We noticed you havent subscribed to our channel and would love to have you join our family here at the MILLER FAMILY FARM TRUST CHANNEL. Please subscrive and then let us know once you have. WELCOME
@CalebJosephBaker-x2s Жыл бұрын
Have you considered doing the DPF EGR Delete? If so what are your takes?
@Daniel-jv5yr Жыл бұрын
Hello! Please tell me if this solved the check engine error. It also appeared on my Mercedes w205 and I keep deleting it every 500 km but it reappears
@millerfamilyfarmtrust6515 Жыл бұрын
Hello Daniel, These sensors do cause the engine light to come on but you can take your vehicle to your local parts store and have them run a FREE diagnostic on the engine to determine if it is a sensor issue. We noticed you havent subscribed to our channel and would love to have you join our family here at the MILLER FAMILY FARM TRUST CHANNEL. Please subscrive and then let us know once you have. WELCOME
@jimmydickson8854 Жыл бұрын
Put some heat on it mate
@millerfamilyfarmtrust6515 Жыл бұрын
Thanks Jimmy! We noticed you havent subscribed to our channel and would love to have you join our family here at the MILLER FAMILY FARM TRUST CHANNEL. Please subscrive and then let us know once you have. WELCOME
@TheJewelleryWorkshop Жыл бұрын
Hi buddy, I got a c220d Nox sensor issue started 3 years ago and Mercedes accepted liability and replaced. It then needed replacing 2 more times within 2 years. But the third time they made an excuse telling me that the ad blu was contaminated (no idea how) and that may be causing the issue and they didn’t replace. Do you think cleaning the sensors will be better or having the nox sensor and the ad blu mapped out of the system would be better(assuming they won’t effect the performance of the car) Thanks
@millerfamilyfarmtrust6515 Жыл бұрын
@TheJewelleryWorkshop Well, its hard to tell what is causing the issue if it has been replaced that often but as long as Mercedes is willing to keep replacing the sensor, I would let them. Also, there are Lemon Laws that come in to play on items that keep failing time and time again. Mercedes generally will stand by thier repair even after warranty period if they have repaired it once as their view point is it wasnt repaired properly or you would be back with the same issue. I know its frustrating but as long as Mercedes is still swapping out the sensor, why not let them and you can always go the route of Lemon Law if all else fails becuase this is a common problem that has not been dealth with properly. We noticed you havent subscribed to our family here at the Miller Family Farm Trust channel and we would love to have you be part of our family here, as we love contributors. Let us know once you have joined. WELCO ME!
@e.a3992 9 күн бұрын
Hi pal, i know its been a while but i’m interested to know what route you went down. I have a 2017 C220D amg line premium plus, got the engine management light come on did a diagnostic and it was a Nox sensor issue, in the time of searching for a new nox sensor it now says Ad blu levels not detected and has a count down from 500 miles. Guessing either the Ad blu tank has crystallised or the pump has gone as well. Keen to know what you got done, did you get it repaired or have it deleted out, repairs i’m looking at over £1500 , deleted out its £250 thanks
@TheJewelleryWorkshop 9 күн бұрын
@@e.a3992 I had it deleted.
@e.a3992 9 күн бұрын
@@TheJewelleryWorkshop thanks for the prompt response, how long did you keep the car afterwards? Did you get any further problems down the line. I heard it can sometimes affect the DPF from regenerating and cause DPF issues afterwards. Also was the car yours or to be given back to the finance company any problems faced if or when given back.
@TheJewelleryWorkshop 8 күн бұрын
@@e.a3992 I’ve still got the car lol. I’m having some temperature sensor issues that I’ve had to replace. But I think having something deleted is not good for the car. The nox sensor is an expensive job that’s why I had it deleted. I have the engine light on at the moment for another sensor. Gonna replace that soon and see what happens
@michaellewis9031 Жыл бұрын
Thanks for the video. need better lighting.
@millerfamilyfarmtrust6515 Жыл бұрын
Good Day Michael, Thanks for the acknowledgement and yes the video took about 13 hours in total to video, edit and find the best priced links and it kept running in to night time for the videoing portion but it got done. We noticed you havenet subscribed to our channel and would love to have you join our family here as we love people who contribute and make a difference. Let us know once you have subscribed and welcome!
@davidsawmandave8731 Жыл бұрын
No oem in the heart of the machine 😅 , cant go wrong with honda oil
@millerfamilyfarmtrust6515 Жыл бұрын
HEllo David, I now I love OEM too but sometimes there is a better alternative than OEM and I think Amsoil is just that. I can get you like Honda Oil for your Talon and I must say you cant go wrong. We noticed you havent subscribed to our channel and would love to welcome you to our family here at the Miller Family Farm Trust channel. Let us know once you have subscribed. WELCOME!!
@figgiefigueroa7372 Жыл бұрын
I seen them sensor welded into the steel. So count your blessings 😂😂😂
@millerfamilyfarmtrust6515 Жыл бұрын
RIGHT! Thanks Figgie, We noticed you havent subscribed to our channel and would love to have you join our family here at the MILLER FAMILY FARM TRUST CHANNEL. Please subscrive and then let us know once you have. WELCOME
@RanchoTexano Жыл бұрын
Great job. It’s silly the Talon needs a service after 100 miles that costs over $1,000 at the dealer. Love my Talon but it’s just dumb
@stevenbaugh9944 Жыл бұрын
10 4 good buddy in doing mine myself!
@suzukimethracer7796 Жыл бұрын
If it still doesn't move as I had a tool a strike with hammer works every time I was fitting a new unit
@millerfamilyfarmtrust6515 Жыл бұрын
Chris, We would love to help but do not understand your question and noticed that you were not subscribed to our channel. Standing by...
@dzgdot Жыл бұрын
Hi I have a c200d 2017 ! I filled up with 10 L of ad blue 3 weeeks ago and recently it says cannot measure ad blue level and e/m light has came on!I ran a diagnostics and I’m getting these fault codes P22A677.( the heater of the nox sensor 2 (cylinder bank 1 ) has an electrical fault) And P13DF09. (The adblue system has a malfunction there is a component fault ) and P2BA901! The car drives absolutely fine is this something I could fix any help would be much appreciated or could I use this same cleaning method mabe to clean it
@millerfamilyfarmtrust6515 Жыл бұрын
Welcome Dzgdot, I would recommend googling the fault codes to see exactly what we are dealing with and if it is sensor related in the exhaust system. Once you know for sure what you are dealing with then you can google the sensor that is malfunctioning and see if it is the same sensor location that is in this video and if it is, then you can try the simple procedure in the video. We would love to have you subscribe to our family here at Miller Family Farm Trust Channel and please let us know once you have subscribed. WELCOME
@100pyatt Ай бұрын
Add 2-3 ozs of JetDry and it'll clean the tank sensor and Adblue injector
@robertotoledo1910 Жыл бұрын
Well good morning Mr. Miller, a warm hello from the sunshine state👋 yes sir I’m pretty mechanically inclined myself I am into heavy truck computer diagnostics, and yes that little detail that you have done and helps out a lot tremendously and you can probably do that a few more times and then when it comes to buy the essential then pack it out the money, but he sure does help to have a little bit of knowledge and tools in the will power do it yourself , and maybe save $1000.000 you never know😀 Yeah I was waiting for the test drive and make sure that everything was cleared out, that’s good, I figure the vehicle will be about five years old that’s when a lot of sense is my start acting up to the wear and tear of being dirty, well listen thank you and enjoy your day, 👌👋
@millerfamilyfarmtrust6515 Жыл бұрын
Thans Robert for the acknowledgement, its good people like you that make it worth while to make these videos. We noticed you havent subscribed to our channel and would love to have you join our family here at the MILLER FAMILY FARM TRUST CHANNEL. Please subscrive and then let us know once you have. WELCOME
@kristi7777777 Жыл бұрын
Helo. I have C220 2015 and fault is P220 E. “Heating position set points 1 can not be reached” Would this help? In my case I have specific situation where I engine light comes on and off few days on, few days off. I have feeling its because of bupms on road but my mechanic checked all contacts and if was good. Not sure what it is, maybe in chip? What you guys think? (Anyone here welcome to advice)
@gmiller4326 Жыл бұрын
HERE IS THE GOOGLED CODE: OBD2 Diagnostic Trouble Code P220E means that NOx Sensor Heater Control Circuit Range/Performance, Bank 1 Sensor 1 has been detected. It appears to be a NOx Sensor issue and you could do this simple fix and see if it resolves your problem and while you are doing this procedure, you can also check the connections as well. We noticed you have NOT yet subscribed to the Miller Family Farm Trust channel and we'd love to have you. Let us know once you have subscribed. WELCOME
@lauramaunu5313 Жыл бұрын
Thank you. This is so helpful. You take the mystery out of starting my own ginger and turmeric 😊
@gmiller4326 Жыл бұрын
You are so welcome Laura!!! We would love to have you become part of our family here on the Miller Family Farm Trust channel where you can contribute you progress in growing your Ginger and other really fun videos. Let us know once you have subscribed. WELCOME!
@thegolfingsociety5093 Жыл бұрын
Great video! The reason for the increased fuel usage with a faulty NOx sensor is that the car will go into a fixed mode trying to reduse the NOx emissions. NOx is created by pressure and heat, running richer will cool of the engine and reduce NOx and that is what the car will do to mange legislation. A NOx sensor allowes the engine to run leaner.
@millerfamilyfarmtrust6515 Жыл бұрын
Thanks @thegolfingsociety5093 for the acknowledgement, its good people like you that make it worth while to make these videos. We noticed you havent subscribed to our channel and would love to have you join our family here at the MILLER FAMILY FARM TRUST CHANNEL. Please subscrive and then let us know once you have. WELCOME
@itsbezzi Жыл бұрын
Has anyone tried this? Has it worked? I’ve had the engine light on for 2 weeks and it comes up as nox sensor, before I take it to Mercedes I’m thinking about trying this. Thank you
@itsbezzi Жыл бұрын
I’ve managed to find someone that can delete the ad blue and it got rid of the sensor £400
@karachisfinest9379 Жыл бұрын
Mercedes Benz is a fallen giant, shit cars with problems after year 3, customer service even shitter. I have a top of the line GLS and after watching this marque get progressively worse with owning 5 different models of their cars, im done with them. Less tech less problems.
@FreeMagneticEnergy2 Жыл бұрын
🧲 The lag bolts you are using are way too short. 2-1/2 inches is what you need especially if you expect to stay up during Highwinds. By the time you read this should you actually read it it’ll be too late as you will have long since installed those lights with lag bolts that are way too short. But you can always go back and upgrade it if you don’t mind the extra trouble. We don’t want it perfectly level that way water will runoff of it. Hundred and eighty for six is what I paid. Included shipping. Made in China as well.
@millerfamilyfarmtrust6515 Жыл бұрын
Thanks James for the input. The light is still up and doing very well here in Florida even in several strong storms. If a hurricane comes, i planned to loosen the U clamps and slip the light off the pole (1 minute job). That way there will be no risk whatsoever. We ser you haven't subscribed yet to the channel and would love to have you as we love people who contribute to our family, Let us know once you have subscribed., WELCOME
@millerfamilyfarmtrust6515 10 ай бұрын
Thank You Free Magnetic
@FreeMagneticEnergy2 Жыл бұрын
🧲 I just bought six 1,200 watts solor powered remote controlled street lights. I’ll make a video of it when I go to install them. Wattage on all these is always over rated.
@redmatrix Жыл бұрын
It's been about 7 months since your comment. I went to your channel and didn't find a video on your street lights.