sure thing

BIG thanks🥰

Actually, its only a shell replacement, nothing to do with the game compatibility

The removed capacitor should be installed on the FPC flexible cable.

@@bitfunx9713 But there is already a capacitor on the cable. Before soldering the flex cable, you removed the capacitor, but when the cable was soldered it stayed in place. There is a capacitor under the cable that is in the way, so you need to unsolder it.

@@bitfunx9713 kzbin.info/www/bejne/d5PPqHiJqJx6d5Isi=U-zM1UaOiE90xe1q

@@bitfunx9713 and the button combination does not work, although the wire is soldered as in the video

@@user-jq5qx9lf2c I'm sorry to hear that you have the problem.If the problem is still not solved,you can contact the stre staff to solve it.

You can try to hold down Left Trigger and Right Trigger+X+Y on the gamecube remote

@@bitfunx9713 and the button combination does not work, although the wire is soldered as in the video

Thank you very much for your feedback. If you need other help, you can contact your customer service.

Thank you for choosing our product. I understand that you may have some concerns about compatibility between our product, the games you play, and your display monitor. Certain games might not be able to output Standard Definition (SD) video signals. When such signals are processed by our color difference converter, there could be display issues on some Standard Definition Cathode Ray Tube (CRT) monitors. Standard-definition CRT monitors typically receive Composite Video Blanking and Sync (CVBS) signals and support the following common resolutions: NTSC format supports 480i (720 x 480 pixels), commonly used in SD NTSC signals, and 240p (720 x 240 pixels), used by some older game consoles. PAL format supports 576i (720 x 576 pixels), commonly used in SD PAL signals, and 288p (720 x 288 pixels), used by some older game consoles. These resolutions utilize an interlaced scanning method where odd and even lines are displayed alternatively. However, even with the same number of pixels, the image quality may differ between NTSC and PAL formats due to variations in frame rates and the number of lines. Please note, these display issues are not due to our product but stem from the games that cannot output Standard Definition video signals. To achieve an optimum display, you would need to select games that can output Standard Definition video signals. I hope this clarifies your concerns. If you have any further questions, feel free to reach out to us. Thank you for your understanding and support.

@@bitfunx9713 Hello- I was just wondering if you had specific games that would have issues.

Thank you very much for your support. If you have any questions in use, please contact us and get support. Finally, thank you again for your purchase.

Thank you very much for your appreciation. We will continue our efforts to provide better products and services. If you have any questions or needs, please feel free to let us know😊.

Thank you for your valuable feedback. We will promptly arrange for out professional team to investigate the issue and provide you with the results as soon as possible. We deeply appreciate your ongoing support and valuable feedback to Bitfunx.

Dear customer, we are truly sorry for the issues you've encountered while using product. In order to assist you better, we need some more detailed information. Could you please provide your operating procedure, the model of your host, and the type of games you play? This information will help us accurately locate the problem and provide you with a solution. Please contact us at the following email address: [email protected]. We look forward to your reply and will solve your problem as soon as possible. Thank you for your understanding and support!

A small number of games do not output 240p/480i(288p/567i) video, in which case you may need to use a separate composite cable or s-video cable on the CRT. If you have any more detailed questions, you are welcome to contact us through email.

@@bitfunx9713 it doesnt work with any game, also if i put Soul Calibur or Virtua Tennis (both originals) doesnt work either. Found the problem. My Dreamcast is VA 1 and its NOT modded. On CRT TV at least it sends audio signal. NOT even that on HDTVS. But also i have an old and broken DC (it restarts itself in loop less than a minute once turned on)...This model is VA 2 and guess what? The freaking cable works on it! But you must advertise cable wont work on any DC model! I will reach you on your support email in order to find a solution because is not customer's fault that your cable has compatibility issues with some DC models.

@@bitfunx9713 could you give examples of these games?

My friend, the product is currently under development. Please follow our Bitfunx official website or AliExpress official store to get the latest updates!

Great, we will consider your development suggestions!

Thank you for your kind words!

Yes, it includes the entire Eject button system.😄

Oh, my friend, thank you for your suggestion, we will provide rubber feet in the next batch of gameboy player cases.

I bought one and it came with rubber feet to install. Hope this helps

Thank you for your purchase! I hope you enjoy this product.@@indatubesurfer

@@indatubesurfer mine did not

Stickers are also a good choice, my friend. If you make a purchase, we will send you this sticker as a gift.！

@@bitfunx9713 oh believe me I'm just happy you have these on the market, I just can't decide what color I want lol

yeah，no screws packaged in，the original ones must be kept

Yeah， since we designed a sega saturn AV port as the output interface，you may need a saturn scart cable for adaptation

You're welcome! We're glad you think our store is cool. If you have any questions or need assistance, feel free to ask. My friend..😄

We are currently considering developing this product.Please follow our official website or our official store on AliExpress.

Yeah，the fat one is a potential program，we will consider it

@@bitfunx9713 i like your costum shells, i recently bought your gamecube shell and pre ordered the gameboy player housing. i would buy ps1 fat and ps2 fat shells, if you bring them out.

Thanks for your comments，inspired

Always glad to see people sharing their thoughts ！

Sorry, sweet I hope you like the music next time.😀

What a good question!Although we don't have the rubber feet, we do have a circular nameplate on the top, which is made of acrylic.😉

Nah I asked on reddit. This is response I got "It's an RGBS cable with RCA connectors. The BNC adapters are for RGB monitors that use BNC connectors, for example Sony's PVM line." Those cables that come with this mod chip don't work for component unfortunately.