Put aside your wii hdmi adpater，lets learn how to solder a built-in hdmi kit!

Bitfunx WIIHDMI Board Kit V0.4 for Nintendo Wii Line Doubler 480P 576p(www.aliexpress...)
Wii HDMI mod is a high-definition digital signal output module based on the GC video project,provides a clean digital to digital HDMI output to the Wii. It supports all of the native output resolutions of the Wii, as well as line doubled 240p and deinterlaced 480i. The Wii HDMI's menus can be controlled using a GameCube controller plugged into controller port 1, or it can also be controlled using an infrared remote. It is currently the best HDMI video processing solution for Wii consoles.

[@iamthemuffin]

very expensive

[@user-jq5qx9lf2c]

In the video he unsolders this resistor, but then by some miracle it’s in place!!!! Shouldn't C43 be desoldered?

[@bitfunx9713]

The removed capacitor should be installed on the FPC flexible cable.

[@user-jq5qx9lf2c]

@@bitfunx9713 But there is already a capacitor on the cable. Before soldering the flex cable, you removed the capacitor, but when the cable was soldered it stayed in place. There is a capacitor under the cable that is in the way, so you need to unsolder it.

[@user-jq5qx9lf2c]

@@bitfunx9713 kzbin.info/www/bejne/d5PPqHiJqJx6d5Isi=U-zM1UaOiE90xe1q

[@user-jq5qx9lf2c]

@@bitfunx9713 and the button combination does not work, although the wire is soldered as in the video

[@bitfunx9713]

@@user-jq5qx9lf2c I'm sorry to hear that you have the problem.If the problem is still not solved,you can contact the stre staff to solve it.

[@user-jq5qx9lf2c]

How to enter osd menu settng?

[@bitfunx9713]

You can try to hold down Left Trigger and Right Trigger+X+Y on the gamecube remote

[@user-jq5qx9lf2c]

@@bitfunx9713 and the button combination does not work, although the wire is soldered as in the video

[@bitfunx9713]

Join us on discord (discord.com/invite/H6v8Y9JRqr ) any question, any time