I have 3 of the Bullnose F250 4x4's I gotta get off my tail and figure out the wiring nightmare on my IDI so I finally get power to my taillights. I also have a '90 Bricknose Supercrew 4x4 460 5 speed and a '94 Aeronose that was a 351 Windsor 5 speed rig. I want to build that one as a flatbed/flatbed camper overlanding rig with a front coil spring conversion on the Dana 50TTB. I'm putting a '69 block 300I6 in my first '82 F250 with the NP435 and the an Aussiespeed 4V intake and the heavy duty exhaust manifold, Duraspark II distributor and oil pan and pickup to match the truck. Can't beat the Bullnose trucks.
@nickrowe92213 ай бұрын
NO NO NO do not use heater hose instead of vacuum hose. Heater hose will not stand up to fuel. As the vacuum hose is connected to the intake manifold there will be some fuel vapors on occasion. ALSO you need a good vacuum hose that will not collapse when the vacuum is in it for prolonged periods. This system is not like brakes today. When you lose em you lose all 4 wheels at the same time. Remember heater hose is designed to take pressure from the inside. Vacuum must do just the opposite. I'm sure you know but a check valve in the vacuum line as close to the manifold as possible will help keep gas fumes out of that line. Otherwise Great Job! love to see these older rigs rolling on the road.
@bitlittle4574 ай бұрын
Did you sell this truck
@Keith-jp6jw4 ай бұрын
Hey bud what do you have to say about the RC lift? I’m looking at the 2.5” with rear leafs for my 93. Kinda on a budget but If I could get first hand experience on it that would be great.
@PappProductions4 ай бұрын
The RC will get the job done just fine! If your a weekend warrior or crusing dirt roads or moderate trails RC is great for that. Some people really hate RC but for their kits are affordable and have performed great for me.
@Keith-jp6jw4 ай бұрын
@PappProductions Wow thanks for the fast reply. I’m building a camping rig for my family and I’d love to hit some moderate trails. I seriously appreciate your input.
@PappProductions4 ай бұрын
Awesome! Good luck on your project!
@MrNemudsling5 ай бұрын
Need to learn how to change gears. Ain’t no shift pattern I ever seen
@buysncharge5 ай бұрын
How's the soft top holding up to UV?
@craigwatson97367 ай бұрын
Looks like an great time on the trail ! Got my 94 bronco ready for some good times
@akajonesy43887 ай бұрын
Where is an update video?!
@branthandford22129 ай бұрын
Those front leafs will beat you to death
@jakenough275310 ай бұрын
Now this is my kind of ambiance. Old bullnoses and rain on the shop is my “happy place”
@GSKYYT10 ай бұрын
You can save her, Im fixing up my 250 6.9... sadly up in the north its gonna be a lot of rust repair over the next few years.
@PappProductions10 ай бұрын
Oh nice! I got a driver side floor pan im putting in this dually now. Rust repair business is no fun! Good luck on your ole F250!
@GSKYYT11 ай бұрын
What is that knocking sound, misfire? Good to see a nice video of one of these running, I have one myself.
@jimsmirh24063 ай бұрын
That knocking sound sounds to me like an exhaust valve guide is going bad. If you crack open the injectors one by one you will find the culprit cylinder. I screwed up the motor in my ‘83 by not listening to someone that told me exactly what it was and it dropped the exhaust valve over time. Idk if the motor is ruined yet or not but I do have another one to put into it and will be paying very close attention to things like this from now on.
@monkeysbusinessАй бұрын
I need that sun visor in my life.
@akajonesy438811 ай бұрын
Sweet truck
@PappProductions11 ай бұрын
Thank u!
@jtravis3011 ай бұрын
What keeps rubbing? Cool truck,
@DonKin-om7yr Жыл бұрын
5spd is a 4 spd low hole,no OD,and i would the rear ratio to be somewhere around 488 or stiffer
@the.porter.productions Жыл бұрын
O-H-I-O Porter greetings 🇺🇸 I’ve seen several of these over the years. Tried to buy both of them. Didn’t have room for them anyway at that time. The old N Fords were quite cool, beefy, roomy & stylish. So you took the bed off the 1st thing. It did make a nice glorified pickup. Hey, either way, you can make such a nice driver out of it. I’m glad that it’s in such nice shape. Get a feel for the truck, what it needs to fulfill its purpose & then go gung ho. Maybe add a second bumper below & then road lights. This truck has so much potential. Enjoy this truck! Blessings my friend. 🤩🥰✌️
@PappProductions Жыл бұрын
Thanks Brother
@carryingfire286 Жыл бұрын
What’s the color on this thing man? Absolutely sick! 👍
@PappProductions Жыл бұрын
Im not sure its one of those dead grey colors hopefully the ford one lol but could be toyota color i know they offer a dead grey color too. I bought it already painted just put wheels, tires, lift, soft top, and exhaust on it
@benturner4352 Жыл бұрын
Beautiful truck! Love bullnose Fords. I also got a 84 but mines a 460 4spd and 4x4. SRW.
@PappProductions Жыл бұрын
Hec yeah sounds like a fun truck! The ole 4x4 bullnoses are hard to find and are the coolest
@70elcamino. Жыл бұрын
they make extensions for them
@carryingfire286 Жыл бұрын
What is the color called? Love this truck!
@boganery Жыл бұрын
God damn it sounds so good.
@jamesmccoy8722 Жыл бұрын
Where did u get the replacement I tried to find where u posted or said where u got it but I can’t find it I’m needing one for my international dump truck
@adjacentchannel Жыл бұрын
I've wanted one of these for awhile now, how much did you get it for? I'm also in Georgia so I'm curious what a general price would be.
@Anthonyridermedia Жыл бұрын
What gears do you run in diff?
@mecamaster Жыл бұрын
Thanks for recording and posting this, also thanks for posting where you found a replacement booster! I've got a 1975 ford F600 that was a uhaul special in one of its past lives that I'm putting back into service and even tho my brakes worked I still insisted we replace everything in the brake system before I go barrelling down the road with 18,998lbs of stuff.
@PappProductions Жыл бұрын
No problem! I dont blame you for going through the brake system. Your truck is going to be real fun putting it to work!
@diegogutierrez6918 Жыл бұрын
Fue magnífico freno pero con el tiempo se agota 💪💪💪💪👏🇨🇴🇨🇴Colombia
@darrelljohnson5764 Жыл бұрын
Pretty sure there’s a 66 n in my hometown in Minnesota . It’s a Tow truck . Believe it was bought new by the Gentleman’s Father . Been in a shed for some years now .
@PappProductions Жыл бұрын
No way thats too cool!
@darrelljohnson5764 Жыл бұрын
@@PappProductions , I’m sure it won’t go cheap , when and if it goes . Knowing the Gentleman, I would imagine it will be in his “estate “ sale . Was a beautiful little rig , probably still with original paint .
@PappProductions Жыл бұрын
@@darrelljohnson5764 they look cool set up as a tow truck rig too dang!
@MrJwh3000 Жыл бұрын
Awesome video! Keep those Farmall videos coming!
@rickey5353 Жыл бұрын
Wow. What a find.🥰
@akajonesy4388 Жыл бұрын
Looks sweet can’t wait to tow my Datsun down from PA with mine
@patrickhueber3798 Жыл бұрын
We have owners 2 up until the ‘80s, great work horse’s, Uhaul used the industrial 330 cu in engine in a lot of there f350 and above trucks through the 70’s and 80’ if you are looking for engine parts ,like heads ,in the future
@jks3849 Жыл бұрын
It needs a power stroke diesel swapped in
@jordanperry3126 Жыл бұрын
How did that truck do pulling the tractor????????
@jordanperry3126 Жыл бұрын
@Kodiak that's good 👍 I'll be honest with you my 95 gmc jimmy I have ever since I first got it in 2015 it hasn't had anything pull behind it yet.
@PappProductions Жыл бұрын
@@jordanperry3126 yes sir!
@teripowers463 Жыл бұрын
Shift pattern must be different
@kaylie_papp Жыл бұрын
Love that tractor!!
@kaylie_papp Жыл бұрын
Take me for a drive now!
@charleshollingsworth1583 Жыл бұрын
I"d love to find a n series like that. My dad pulled mobile homes in the early 70's with a n600 i believe it sportted a 360 or 390 and it would blow mufflers off split them open. odd ball shift pattern 5 speed.
@PappProductions Жыл бұрын
hec yeah thats too cool Charles! the old FE engines would pull all day!
@hook86 Жыл бұрын
Does yours top out at like 45-50 mph? Mine is slow as can be! Will pull God awful amounts of weight but not quick.
@hook86 Жыл бұрын
@Kodiak OK cool! Thanks for the reply. It's a great ranch truck, tough as nails and actually does well going up and down snowy roads!
@PappProductions Жыл бұрын
@@hook86 roger that, I would love to drive this thing in the snow!
@akajonesy4388 Жыл бұрын
Love the Truck bro, I have been working on the Big red that ya sold me, bout to put the secondary fuel tank back in her after fixing a ton of leaks haha
@PappProductions Жыл бұрын
Fantastic dude im glad you enjoying it!
@3807shawn Жыл бұрын
That's a beautiful truck brother
@PappProductions Жыл бұрын
Thank u sir! I want to do some more videos on it
@jordanperry3126 Жыл бұрын
I happen to be one of them kodiak i never owned a 6.9 diesel but seeing how great they are i want 1 so i can work on it drive it and use it have a great evening brother.
@jordanperry3126 Жыл бұрын
@@PappProductions to be truthful these days I'd rather have something like this these new trucks cost more than a mobile home does.
@mikpow7509 Жыл бұрын
I have one also ....not those switches ...have a diagram or point to point?
@PappProductions Жыл бұрын
All u need is a switch and one hot wire going to to the high idle solenoid
@swanify69 Жыл бұрын
Sweet…. Go off road and then drive home on the hwy. Broncooooooooo!
@GMC05 Жыл бұрын
A unloaded gun is useless 😂
@patriciareynolds2729 Жыл бұрын
put one on my f600-1969, went thru whole system, still weak brakes. i hear the vaccum booster vent on startup, it stops sucking when i press brake pedal. have a strong- hard pedal with weak brakes.??????
@hook86 Жыл бұрын
Truck beds look so goofy on those lmfao
@psd28 Жыл бұрын
The probe connectors are compatible and are actually a good upgrade.