Drop the music, it's all I can hear.

Hello, do we know the root cause why it stop working? I know this workaround but last time it is working only for few days and I have to do it again.. (it is annoying). Maybe time to replace whole module..

This really worked. Thank you so much. (Roborock S55)

If the motor does not run even though powerbank is providing the power - motor is completely dead right? Can i just buy any similar sized 5v motor and replace it?

Segui o passo a passo e deu certo. Muito obrigado ❤

Error 8 wat

But why is the music louder than the speech?

I’m not watching that. Get rid of the music. It’s annoying.

So far so good with this vacuum. kzbin.infoUgkx8ISPQRRAfpAaX4msGjyodObTBnlj4T5g I was a little concerned to find it seems to be all plastic, but the reviews were good, so I'm hoping for the best. Very easy to assemble Recommened, and only attachments I've used so far work well, and are easy to use. Doing a good job on the new carpet in my bedrooms and stairs. Works well on the hardwood on my main floor too. Reasonable weight and cord length. I already knew from an earlier review that it wouldn't fit under furniture, but I can use my Eufy for that, so no problem - the high traffic areas that need a stronger suction was really what I bought this for. If it continues as it's started, it will be a good buy and well worth the money. I have had two Shark Rocket stick vacs in the past that are super easy to use, but the motors just don't last well, even with scrupulous cleaning of the filters. I'm hoping for better with this Bissell.

Did anyone ever cleaned the fan of the roborock?

Why do lie? U did not even open this device before the video but u say u cleaned it reguarly

Excellent video - and it worked for me - I don't know why running the motor for 30 seconds cured the problem, but it did!

thank you for the best video! when i remove the motor from the roborock . i see a lot of hair stuck under the rubber, when i clean all of this, the roborock back to work again,

Thank you

The best way to clean this vacuum is to use compressed air. Also use compressed air on the filter. It does wonders...

Thank you. Thanks to you I was able to fix my Roborock 5.

Fiz exatamente isso e meu Roborock S50 voltou a funcionar perfeitamente, thank you!

Thank you very much. I succeeded. It worked.🤗 I did exactly as it is in the video.

Worked but it did again after 1 day.

I can’t find a replacement omnidirectional front wheel ... please HELP.

Спасибо мужик, ты спас моего Альфреда и меня от потери 100$ (столько хотят за ремонт). Thanks man, you saved my Alfred and me from losing $100 (only want for repairs)

This is only a partial solution. Better buy a new motor. Mine works for 2-3 hours and then gets stuck again. I tried cleaning everything, but the laser is moving smooth

Turn down the music next time please. Way too loud.

LDS is rotating but still "Error 1" :( What else should I check?

Works! Thanks a lot)

I fixed mine the other day with a 9v battery to jump start the motor, works fine now (also cleaned the spindles etc).

What is the explanation for this fix? Just connect new cables and it start working? I don't get it

Great tip! Worked for my Roborock and I resurrected it from the dead. Thanks a lot for this video!

I have error 10 on my roborock s50.. Where is the air filter?

Easy to assemble

Thank you so much for this thorough tutorial! I just opened up the back panel after using my Robo rock for 4 months! The dust and dog hair had really accumulated! I have no doubt that my vacuum would not be running/working soon if I had not removed that panel and cleaned the inside!!! So, thank you so much for the information🙂

Thank you so much! Ive seen other videos like this one but did not understand how to connect the wires plus the videos were a bit too speedy for me, a woman who has no idea of wires. But you talked slowly and showed everything i managed to start my vacuum. Thank you million!

Hi my roborock s5 max have the same problem. However the lidar is spinning. I tried your tips but it doesnt work. Can you help me. Thanks

Thank you for the video. My robot was doing mopping but somehow now it doesnt recognized the mopping module. Can you give advise how i can solve the issue? thank you

Hello! If my motor/laser sensor is already spinning, but still says Error 1, do i still need to jump start the motor?

I have this model of roborock since Oct 2018. I have 2 filter to interchange between washes every month, and added new mopping clothes twice and changed the side brush once. This little helper requires very very Low maintenance. Unfortunately I had just decided to do a big time cleanup and did not place a cloth on the floor to protect the ‘crown’ and scratched it. Thanks for your video on showing how to clean the interior of the vacuum - that is one area I missed out just now. Will be cleaning it next round. Saving this video for my reference next round. Thanks 👍🏼 PS: I will be retrieving the big brush from the bin and try to clean it for later user… actually there are no nicks on the rubber flap on my brush - to think I had not even clean it in 3-4 years!

Worked for 1 time, the next day same problem.

Good job mate

Thank you this indeed solved the issue without replacing the whole LDS unit!

*I run the m6 daily, and my floors look awesome🌼 **allabout.wiki/Robotic** I wet mop 2 days and dry sweep the rest of the days. When I first got it, I used the included disposable pads. I didn't like them--the dry pad has no depth so if it picks up a chunk of something, like dry cat food, then it pushes it around or drags it around the floor. The wet pad wasn't very absorbent so left streaks and wheel marks.*

Thank you so much the solution worked for my roborock S5 error 1. However, before and after error 1, I was and am getting error 8 (remove obstacles). I think there is some problem with right wall sensor as it get stuck very often at right side

I think if you remove the bottom cover, you will lose warranty, isnt it?

I have a roborock and I am facing some problem. It’s making noise which is not the normal one can it be a problem of the motor

Working for me. Just clean the durst around the motor and give a little bost with a old usb cable on computer. And the motor will restore the rotating.

Even filters are dark in india :)

i have a huge issue with the sidebrush , no matter how hard i try to unscrew it it doesn't move ... is it normal that when i unsxrew it counter clockwise the thing spins ? or do i have to maintain one finger on it to prevent it to turn ? cos i feel like i do this and nothing unswrew.... sorry for my poor English ... hope you understood what i meant... and did someone found a good solution to add to hot water in the tank ? thanks a lot

you are a genius man, you deserve every like you get

That did the trick. I bought a new motor from AliExpress then after an hour watched your video :D.

Thanks so much for your solution ❤

Thank you! It worked!