Xiaomi Roborock S50 | LDS Error 1 | LDS Stopped Working | LDS Error Fixed - TOTAL TECH

  Рет қаралды 59,767

TOTAL TECH - All About Gadgets and Technology

TOTAL TECH - All About Gadgets and Technology

Күн бұрын

Пікірлер: 190
@atretyakov738
@atretyakov738 5 жыл бұрын
Our roborock suddenly stopped working and I started googling the solution to the problem.. However, videos in Russian (I am from Russia) suggested replacing the LDS - as if it was the only way out and nothing else could help. But your video is pure magic!!!!!! I did everything according to the instruction and the cleaner came back to life!!! I can't believe it's so simple. Thanks so much!!!
@PisarencoGh
@PisarencoGh 3 жыл бұрын
That did the trick. I bought a new motor from AliExpress then after an hour watched your video :D.
@tinasis
@tinasis 5 жыл бұрын
Amazing! This worked like a charm. I first used lightning USB cable but it did not work but when I used micro USB cable it worked. Your video helped a lot! Thanks!
@totaltech-allaboutgadgetsa9732
@totaltech-allaboutgadgetsa9732 5 жыл бұрын
This solution will help the roborock LDS sensor to run with no issues. So, you can safely use this solution to fix roborock lds error 1. Please hit SUBSCRIBE, LIKE 👍 and SHARE, if this video helps you in anyway
@kacper123450
@kacper123450 3 жыл бұрын
you are a genius man, you deserve every like you get
@mlegge
@mlegge 2 жыл бұрын
Excellent video - and it worked for me - I don't know why running the motor for 30 seconds cured the problem, but it did!
@fro_oo_oo
@fro_oo_oo 4 жыл бұрын
Thank you for sharing! It worked on the first attempt. People... to disassemble Roborock S50 upper lid, you have to force a little bit (pull up the fixed lid part). Don't be afraid...you (probably) won't broke it :-D (May I suggest that you lower the volume of the music? It cover your voice sometimes) 👌
@totaltech-allaboutgadgetsa9732
@totaltech-allaboutgadgetsa9732 4 жыл бұрын
Will keep your suggestions in mind for my next video. Good to hear it's working for you
@commandmediacorps
@commandmediacorps 4 жыл бұрын
*Difficulty 2/10*: Worked exactly as described, w/ older mini usb, red & black cables only. Tried to plugin to wall via adaptor and didn't work. After reattaching the wires, plugged to laptop, it worked! *ANYONE* with a small phone / laptop repair kit can do this. Tip: strip quite a bit of of the red / black insulation casing from the cables, so you've got plenty of slack. The only thing that has happened out of the ordinary, just prior to this LDS error 1, is that when the vac didn't get placed on the charger properly and caused the battery to totally drain. Even though, I recharged before using, seems something changed. How's that for anecdotal? Thank you very much taking the time to show us how to fix, saving us a lot of money. Cheers!
@totaltech-allaboutgadgetsa9732
@totaltech-allaboutgadgetsa9732 4 жыл бұрын
Thank you for the comments
@Luchozenker
@Luchozenker 4 жыл бұрын
Worked on a Xiaomi Vacuum! You saved me some money for sure! Thanx!
@mightystorm5583
@mightystorm5583 4 жыл бұрын
You just saved me from an unnecessary headache. Big thanks!
@BEGYUHASAMPLE
@BEGYUHASAMPLE 3 жыл бұрын
Thank you for this video. This worked exactly as described. You saved me $75.
@perjakobsen2856
@perjakobsen2856 4 жыл бұрын
Hi This approach worked perfectly for my Roboroc. Video was clear, concise and to the point and saved me money and time. Thank you!!
@totaltech-allaboutgadgetsa9732
@totaltech-allaboutgadgetsa9732 4 жыл бұрын
Thanks for your comments. Good to hear 👍 Please SUBSCRIBE that will motivate me
@unafilliatedx2310
@unafilliatedx2310 4 жыл бұрын
Wow, looks like a lot of people have experienced this problem. About to take mine apart, hope it works!
@andreaskircher6811
@andreaskircher6811 4 жыл бұрын
Thank you very much! Saved me 70 Dollars. Great job !
@totaltech-allaboutgadgetsa9732
@totaltech-allaboutgadgetsa9732 4 жыл бұрын
I'm glad I could help. Request to subscribe
@charlyf273
@charlyf273 5 жыл бұрын
I bought a micro usb cable for just 1€ and it worked! Thank you so much!
@ipariszalonna
@ipariszalonna 4 жыл бұрын
Thanks for this, it actually worked. You saved me from having to sweep up my floor manually :D
@totaltech-allaboutgadgetsa9732
@totaltech-allaboutgadgetsa9732 4 жыл бұрын
Glad I could help!
@bartjeffery3175
@bartjeffery3175 5 жыл бұрын
Legend! Worked a treat. Thanks from Australia mate!
@totaltech-allaboutgadgetsa9732
@totaltech-allaboutgadgetsa9732 5 жыл бұрын
Thanks for your comments. I do not want the world to face the trouble I faced.
@darta1094
@darta1094 4 жыл бұрын
At first I thought it was a good joke. But it worked for me! Thank you. Now, when you are limited in access to spares and support it is even more value. 👍🚀
@totaltech-allaboutgadgetsa9732
@totaltech-allaboutgadgetsa9732 4 жыл бұрын
Happy cleaning Dimitri. Will be coming up shortly with a video on "Is it safe to order spares in these tough times?". Stay tuned...
@StandingTall32
@StandingTall32 4 жыл бұрын
awesome, thank you so much.. didn't even take 5 mins to do this!!!
@mareka.5092
@mareka.5092 4 жыл бұрын
Thank you very much. Easy to implement, detailed solution. Hope it will work for some time, in that time Will order new motor from Aliexpress, it is around 5$
@knightwolf8877
@knightwolf8877 4 жыл бұрын
Do you have a link please
@dani_m
@dani_m 4 жыл бұрын
Worked on my Roborock S55! I used an old micro USB cable and worked at the first attempt! Thanks!
@abdulrahmankhankan1919
@abdulrahmankhankan1919 4 жыл бұрын
My unit's laser sensor was not moving and this fixed the problem perfectly! Thanks.
@kvsandro
@kvsandro 4 жыл бұрын
Thanks man, this really does work......... I have no idea why, but it does. Soldered 2 wires to the motor, and first tried hooking it to an USB power adapter as I didn't want to risk a PC/Laptop, however although the motor worked - it did not work when I put it back in the unit. Then I hooked it to the front USB on my PC, and after another test - it worked inside the roborock unit as well. Damn.
@swissinvestor7948
@swissinvestor7948 3 жыл бұрын
Thank you this indeed solved the issue without replacing the whole LDS unit!
@LucKaSingHo
@LucKaSingHo 4 жыл бұрын
Thanks from Switzerland, worked for me! I just was able to let it turn like half a second because the battery I had was almost empty
@totaltech-allaboutgadgetsa9732
@totaltech-allaboutgadgetsa9732 3 жыл бұрын
Glad it helped!
@frostouze
@frostouze 4 жыл бұрын
Worked the first time I tried, amazing solution!
@cristian6402-t8y
@cristian6402-t8y 4 жыл бұрын
Awesome. It does work. I tried removing and putting back the sensor head multiple times and after every time, it did work, for about 5 minutes, then again it stoped working. Then I tried THIS IN THE VIDEO, and IT WORKED !!!!!
@skgoh1988
@skgoh1988 4 жыл бұрын
thanks man. your method is working on my issue. During start up my sensor motor turn a little while then stop, I was curious whether the motor spoil or what till found your video! thumbs up for the test.
@raffa202
@raffa202 4 жыл бұрын
Danke hat wirklich funktioniert. Schon seltsam das Problem. Aber solange man sich damit Abhilfe beschaffen kann. Danke.
@Anavaleria63
@Anavaleria63 2 жыл бұрын
Fiz exatamente isso e meu Roborock S50 voltou a funcionar perfeitamente, thank you!
@DCFC1200
@DCFC1200 5 жыл бұрын
If you had only had the cleaner 3 months before it gave you trouble , were you not covered by manufacturers warranty ?
@totaltech-allaboutgadgetsa9732
@totaltech-allaboutgadgetsa9732 5 жыл бұрын
In fact yes, it was under warranty then. But the problem is that I ordered it from Gearbest in UK and got it shipped from China to an US address and had it delivered to India. So, for all the practical reasons that I cannot ship it back to UK or China and there is no service available in India, I had no choice but to look out for such an alternative.
@wcortess
@wcortess 4 жыл бұрын
Funcionou!!! Incrível!!! Muito obrigado!!! I'm from Brazil 👍👍👍
@totaltech-allaboutgadgetsa9732
@totaltech-allaboutgadgetsa9732 4 жыл бұрын
Boa sorte! Desfrute de limpeza
@kieranv
@kieranv 4 жыл бұрын
Thankyou for posting this video, very helpful. The stripped usb cable to laptop was an easy way to charge the motor. The vacuum is cleaning the house now. I'll update if it stops working again in the next few weeks. Fingers crossed its all good...
@kieranv
@kieranv 4 жыл бұрын
It lasted about a week before stopped again. I used the same repair a few more times while waiting for a new motor in the post. Now replaced motor and it's not had any more problems. Helpful video but for me a temporary fix.
@calinbogdan9894
@calinbogdan9894 4 жыл бұрын
@@kieranv I have the same problem. Where did you bought the new motor? Thanks
@margasor
@margasor 4 жыл бұрын
It works! Perfect, thanks a lot. You make my day.
@MisterSgtPeppers
@MisterSgtPeppers 4 жыл бұрын
You rock buddy, thank you from France
@edwardteonadi666
@edwardteonadi666 5 жыл бұрын
Wow this really works! Thank you!
@baxiboxer6660
@baxiboxer6660 2 жыл бұрын
Thank you very much. I succeeded. It worked.🤗 I did exactly as it is in the video.
@shikaik5907
@shikaik5907 4 жыл бұрын
Thank you, your method works! Help to "revive" my roborock! 😄
@illu1na
@illu1na 8 ай бұрын
If the motor does not run even though powerbank is providing the power - motor is completely dead right? Can i just buy any similar sized 5v motor and replace it?
@princebhanwra11
@princebhanwra11 4 жыл бұрын
Wow! It worked in first attempt. Thanks for sharing.
@history_on_the_map
@history_on_the_map 2 жыл бұрын
thank you for the best video! when i remove the motor from the roborock . i see a lot of hair stuck under the rubber, when i clean all of this, the roborock back to work again,
@b3rlin2023
@b3rlin2023 4 жыл бұрын
This worked great for me too! Appreciate you sharing this fix. Thank you! :)
@raingelkhoo
@raingelkhoo 3 жыл бұрын
Hello! If my motor/laser sensor is already spinning, but still says Error 1, do i still need to jump start the motor?
@Fatomse
@Fatomse 4 жыл бұрын
Thank you very much! Worked perfectly fine.
@totaltech-allaboutgadgetsa9732
@totaltech-allaboutgadgetsa9732 3 жыл бұрын
Glad it helped
@Mellymaus88
@Mellymaus88 4 жыл бұрын
Thank you so much it worked. If this happens again would you buy a new motor or laser? Thank you for your help.
@totaltech-allaboutgadgetsa9732
@totaltech-allaboutgadgetsa9732 4 жыл бұрын
The laser, thought a little high in price compared to motor. Bcoz LDS motor is not working all ways as Serene Teng commented above and I heard from few others. But you can still try.
@blade243736
@blade243736 4 жыл бұрын
Worked perfectly fine! Thank you very much :)
@pavelfeoktistov9389
@pavelfeoktistov9389 4 жыл бұрын
Thank you ! U save my nerves . Good work !
@spoderman1421
@spoderman1421 3 жыл бұрын
Worked like a charm!
@lucia8880
@lucia8880 3 жыл бұрын
It really worked! I am so happy! Thanks a lot!
@carolkaliente
@carolkaliente 9 ай бұрын
Segui o passo a passo e deu certo. Muito obrigado ❤
@zoomzoomzoom9669
@zoomzoomzoom9669 4 жыл бұрын
It works, thank you so much.
@totaltech-allaboutgadgetsa9732
@totaltech-allaboutgadgetsa9732 4 жыл бұрын
#🙏SUBSCRIBE/LIKE/SHARE🙏# I hope people who are seeing this video are finding it helpful. I'm glad I could help. But a small request to SUBSCRIBE to my channel that will motivate me to do more videos 🙏🙏🙏
@pitsariapoueskise7547
@pitsariapoueskise7547 3 жыл бұрын
thank you . you save me. thank you very much. it worked. i did it with usb. thanks again
@maria4495
@maria4495 4 жыл бұрын
Thanks a lot !!!! My Roborock works!
@amitgupta12knp
@amitgupta12knp 3 жыл бұрын
Thank you so much the solution worked for my roborock S5 error 1. However, before and after error 1, I was and am getting error 8 (remove obstacles). I think there is some problem with right wall sensor as it get stuck very often at right side
@iurandum
@iurandum 3 ай бұрын
Same problem Error 1 changed to Error 8 .
@phoenixmap
@phoenixmap 3 жыл бұрын
Thanks so much for your solution ❤
@stefaniesalim5264
@stefaniesalim5264 4 жыл бұрын
I need a guidance how to change the laser of roborock S5 Max, do u have any experience ? I need that urgent, tx in adv
@totaltech-allaboutgadgetsa9732
@totaltech-allaboutgadgetsa9732 4 жыл бұрын
Sorry for the late response and wish you found out the solution. But have you looked at this video on repairing LDS Error 1? Changing laser of Roborock S5 is similar to this.
@vicever08
@vicever08 4 жыл бұрын
It did not last for me. I fixed it eventually, by drop a few drops of oil on the brass bearing of LSD driving motor. I tried to restart it by driving it with 6V dc supply, but it only worked for a few minutes. After adding oil, it worked for 4 hours already and a new motor is on the way.
@Happywifihappylifi
@Happywifihappylifi 4 жыл бұрын
i just fixed mine with this solution! The hardest part was stripping wire of the USB cord. Otherwise, the rest was a breeze!
@antonorlov4127
@antonorlov4127 3 жыл бұрын
Lol, it worked. Thanks man 😂
@avivshitreet8454
@avivshitreet8454 4 жыл бұрын
Thank you sir!! Worked like a charm!
@andrejdragovan
@andrejdragovan 5 жыл бұрын
Worked for me too. Thanks a lot.
@DeepBlue2107
@DeepBlue2107 4 жыл бұрын
great video. Helped with my problem a lot 👍
@meghasharma3184
@meghasharma3184 4 жыл бұрын
hello, i tried this and it worked but after using vaccum.for 5-6 times the error came back. is it normal..do i need to do tjis everytime.
@dwizzle8405
@dwizzle8405 4 жыл бұрын
Need to replace the motor. Had the same issue and it fixed it. www.amazon.com/fayle-Roborock-Cleaner-Pulley-Distance/dp/B0854CRGQD/ref=mp_s_a_1_4?dchild=1&keywords=roborock+s5+replacement+motor&qid=1609524372&sr=8-4
@cerber20008
@cerber20008 3 жыл бұрын
Thank you so much ! It works very well.
@noahderrington5156
@noahderrington5156 2 жыл бұрын
I fixed mine the other day with a 9v battery to jump start the motor, works fine now (also cleaned the spindles etc).
@TheAxt14
@TheAxt14 3 жыл бұрын
Thank you! It worked!
@hasnunadha2707
@hasnunadha2707 3 жыл бұрын
Hi my roborock s5 max have the same problem. However the lidar is spinning. I tried your tips but it doesnt work. Can you help me. Thanks
@maxvoziian2587
@maxvoziian2587 5 жыл бұрын
Thanks its really works!
@JohnSmith-we1xg
@JohnSmith-we1xg 4 жыл бұрын
Well I just turned the laser 4 or 6 times, put the roborock in an another place and it works again. Thanks for the tips
@mtbtrails4774
@mtbtrails4774 4 жыл бұрын
Thanks a lot, you saved my vacuum!;) does this error come back for everyone, or has some1 managed to perma fix it like this?
@swieca244
@swieca244 4 жыл бұрын
For me is comeback. I do this. Clean a house. And next time is always stop
@mtbtrails4774
@mtbtrails4774 4 жыл бұрын
@@swieca244 I guess I was lucky, 6 months and it still works :)
@dwizzle8405
@dwizzle8405 4 жыл бұрын
It came back multiple times for me and finally I replaced the motor on it and it fixed the issue. www.amazon.com/fayle-Roborock-Cleaner-Pulley-Distance/dp/B0854CRGQD/ref=mp_s_a_1_4?dchild=1&keywords=roborock+s5+replacement+motor&qid=1609524372&sr=8-4
@tomer8385
@tomer8385 4 жыл бұрын
Thanks Works!!
@patrickpalm5092
@patrickpalm5092 4 жыл бұрын
Perfect! Thanks a lot.....👍🏻😁😊
@codrin2020
@codrin2020 4 жыл бұрын
Thank you for the solution, it works great!!!👍 However, this works one time, if I want to turn it and have it to clean the house after 2 days, I am gettinf again fhe error and I need tk repeat the process. Is there a permanent way to fix it? Thanks
@beatakrawczyk6079
@beatakrawczyk6079 4 жыл бұрын
I have the same thing. To contact customer support its impossible. I think you need to buy a new LDS on there website.
@swieca244
@swieca244 4 жыл бұрын
The same. Maybe you tix it? Enough a motor lsd or new lsd?
@codrin2020
@codrin2020 4 жыл бұрын
@@swieca244 In the end I have ordered this one from Aliexpress, replaced it and its working again✌️ - Gear Transmission Motor for XIAOMI 1st mijia 2st Roborock S50 S51 S55 Robot Vacuum cleaner Spare Parts Laser Distance Sensor LDS
@dwizzle8405
@dwizzle8405 4 жыл бұрын
Had the same issue and bought a new motor and it worked. www.amazon.com/fayle-Roborock-Cleaner-Pulley-Distance/dp/B0854CRGQD/ref=mp_s_a_1_4?dchild=1&keywords=roborock+s5+replacement+motor&qid=1609524372&sr=8-4
@ionlaurentiuvalentin
@ionlaurentiuvalentin 4 жыл бұрын
Thanks a lot. Very helpful, indeed. Great job
@ionlaurentiuvalentin
@ionlaurentiuvalentin 4 жыл бұрын
Also with a micro usb
@wanbeepeto
@wanbeepeto 4 жыл бұрын
Hi, i do that proceedement but after 15min of cleaning the error 1 appears. How many minutes i have to put the 9v batery on the sensor?
@hunglao1810
@hunglao1810 4 жыл бұрын
M cũng bị vậy, cuối cùng thay motor có hết ko b, đang đặt moto về
@dwizzle8405
@dwizzle8405 4 жыл бұрын
Had the same issue and if by doing this it doesn't work you need to replace the little motor. Worked for mine
@muhammed38emin
@muhammed38emin 4 жыл бұрын
Dostum harikasın, yöntem işe yarıyor. Yalnız uzun vadede sıkıntı tekrar ediyor sanki. 3 ay önce Error 1 ile karşılaşıp videodaki yöntem ile, USB ile elektriğe bağlayıp sorunu çözmüştüm, ama şimdi aynı hatayı tekrar alıyorum. Kesin çözüm motorun değişmesi mi acaba?
@uppelmonster
@uppelmonster 5 жыл бұрын
Works perfect! Thanks 🙏🏻
@kurbuczmark621
@kurbuczmark621 3 жыл бұрын
Works like a charm
@nechar-joshi
@nechar-joshi 4 жыл бұрын
It worked for me, but the only problem is how long will it work for before it stops spinning again.
@khanhbber
@khanhbber 4 жыл бұрын
It will not working again :(
@totaltech-allaboutgadgetsa9732
@totaltech-allaboutgadgetsa9732 4 жыл бұрын
It's been working all this time for me. To be frank it stopped once and never again.
@laxmanp9559
@laxmanp9559 5 жыл бұрын
excellent, mind blowing
@techv6849
@techv6849 5 жыл бұрын
Thanks Laxman
@FedericaZammarchi
@FedericaZammarchi 3 жыл бұрын
Thanks man! You saved me
@fennecfr
@fennecfr 4 жыл бұрын
It works ! Thank you
@waltdisneypixar
@waltdisneypixar 4 жыл бұрын
Thank you for your time
@blinkmeforever
@blinkmeforever 2 жыл бұрын
Thank you
@SpardaSP
@SpardaSP 4 жыл бұрын
THANK YOU MY CHILD IS WALKING AGAIN !!!
@totaltech-allaboutgadgetsa9732
@totaltech-allaboutgadgetsa9732 3 жыл бұрын
You're welcome!
@l44nny
@l44nny 4 жыл бұрын
Thanks, worked for me!
@TechTalkSweden
@TechTalkSweden 4 жыл бұрын
Can’t believe it actually worked!
@rajeshwarigolla3766
@rajeshwarigolla3766 3 жыл бұрын
Thanks it worked
@b.u.9562
@b.u.9562 4 жыл бұрын
Thank you so much!
@JanMeier1
@JanMeier1 4 жыл бұрын
This works! Wow. Great
@Zoro449
@Zoro449 5 жыл бұрын
And why does this occur? What reason? And how long does this procedure help?
@totaltech-allaboutgadgetsa9732
@totaltech-allaboutgadgetsa9732 5 жыл бұрын
This happens due to fluctuations in electricity from the power source, usually. This solution will help the roborock LDS sensor to run with no issues, until the voltage fluctuations hit again. So, you can safely use this solution to fix roborock lds error 1. Please hit SUBSCRIBE, LIKE 👍 if this video helps you in anyway
@MrFredi_
@MrFredi_ 5 жыл бұрын
@@totaltech-allaboutgadgetsa9732 Hi, I tried it and It works some minutes, bit then again the same. Do you know what could it be?
@szymen88
@szymen88 4 жыл бұрын
@@MrFredi_ same for me, moved only 1 meter and stopped again. Replacing the motor will help?
@ingridanschau3675
@ingridanschau3675 4 жыл бұрын
Obrigada, funcionou perfeitamente!
@teoteo8831
@teoteo8831 4 жыл бұрын
Great!thanks a lot!
@stevethea5250
@stevethea5250 4 жыл бұрын
How do you have Pink version bro?
@totaltech-allaboutgadgetsa9732
@totaltech-allaboutgadgetsa9732 3 жыл бұрын
Was left with just one while I was purchasing it and its this color and did not bother. What is your's?
@emmanueldelormesoitdelormo7920
@emmanueldelormesoitdelormo7920 4 жыл бұрын
merci beaucoup , super tuto et ça marche
@TheAlBathorn
@TheAlBathorn 4 жыл бұрын
est ce que vous avez eu de nouveau le pb? car moi oui après 10 min
@ekaterinaeiteneier896
@ekaterinaeiteneier896 4 жыл бұрын
Super vielen vielen dank thenk you
@mcrrlh
@mcrrlh 4 жыл бұрын
Obrigada. Funcionou 😁
@feitola
@feitola 5 жыл бұрын
It actually worked! Is it programmed to fail after a certain time and this resets it? planned obsolescence?
@totaltech-allaboutgadgetsa9732
@totaltech-allaboutgadgetsa9732 5 жыл бұрын
Thanks for your comment. Obsolescence is inevitable with every electronic product, just that we are not sure when. People would not choose to upgrade/buy if the same product/spares works forever and thats how they run their businesses, I believe.
@Thomas-oz1xw
@Thomas-oz1xw 4 жыл бұрын
Thanks :)
The Best Band 😅 #toshleh #viralshort
00:11
Toshleh
Рет қаралды 22 МЛН
To Brawl AND BEYOND!
00:51
Brawl Stars
Рет қаралды 17 МЛН
Try this prank with your friends 😂 @karina-kola
00:18
Andrey Grechka
Рет қаралды 9 МЛН
We Attempted The Impossible 😱
00:54
Topper Guild
Рет қаралды 56 МЛН
Angry White Cat brutally Attacks other Cats.
5:54
The World of Cats
Рет қаралды 3 М.
Xiaomi vacuum, +2 años. Error 1,  como solucionar sin cambiar piezas.
7:52
Miguel Angel Garcia
Рет қаралды 65 М.
HOW to DISASSEMBLE XIAOMI MI ROBOROCK S50 2 ROBOT vacuum CLEANER WHAT's INSIDE
7:41
Китай в Умном Доме - Evgen Lubops
Рет қаралды 81 М.
Xiaomi Roborock | LDS Sensor Error 1 | LDS Motor Repair - TOTAL TECH
8:18
TOTAL TECH - All About Gadgets and Technology
Рет қаралды 20 М.
SpaceX's shows new Starship Heat Tiles! And they're red!
19:56
What about it!?
Рет қаралды 52 М.
Roborock S50 S51 take apart fan replacement
10:50
F vd H
Рет қаралды 140 М.
Roborock Error 1 - Laser Distance Sensor. Replace Motor.
5:57
Simon Davies
Рет қаралды 21 М.
The Best Band 😅 #toshleh #viralshort
00:11
Toshleh
Рет қаралды 22 МЛН