Thank you for your comment and input. Just more like a first impression video. But you’re right, I could have done more.

I will check again and let you know.

​@@TossSongThank you! Also can you tell me which adapter you use for the type c charging cable? Looks pretty convenient!

Yes, I got the magnetic adapter from Amazon. If your search “USB-C magnetic adapter”, you’ll find several brands. Anyway, I just checked the Steam, it no longer shows the name of the controller other than “Xinput controller”. However in “Begin Test”, it still shows the old outline image of the Xbox 360 controller and “Device Support: 45e-28e-4bfcbe17”. In Windows 11, it’s “Flydigi VADER 3”.

Hi, thanks for reaching out. Yes, the DJI Osmo Pocket 3 can take still photos. It has a 9.4 MP resolution, 20 mm f/2.0 lens, and 1-inch CMOS sensor. It’s doesn’t have high megapixels, but the 1-in sensor does great.

Thanks for comment and also for the info. This is very good detail on circular test. I’d like to into it, interesting!

Hi, thanks for reaching out. According to Sony support page, Yes. But you would have to have camera firmware Ver. 3.00 or later (if not, just update it). Moreover, you would also have to have Sony compatible lens for this feature to work. helpguide.sony.net/ilc/2210/v1/en/contents/TP1000882810.html support.d-imaging.sony.co.jp/www/cscs/function/compatibility.php?fnc=1001&area=gb&lang=en&ref=1

@@TossSong great thank you

Hi, thanks for your comment. Yes, it will work with the AD100Pro. I also have the 200Pro, works perfectly.

@@TossSong Thank you for confirming it. I am going to get an AD100Pro then. Cheers!

No problem. 👍

Thank you for your comment and question. I’m not sure. Camera settings: Check your camera's flash settings. Make sure it's not set to force manual mode for external flashes. Or flash compatibility: If you're using a third-party flash, it may not support TTL with this combination of camera and trigger. Let us know.

@@TossSong It works with the flash directly on camera. But not with the trigger. Tried everything. No chance.

The flash itself support TTL?

​@@TossSongYes, the TT350 works like charm on the XT-20.

Try more. Make sure the firmware on the trigger is updated. Double-check the camera’s settings. Sometimes, custom settings or configurations can interfere with TTL mode. Make sure that the trigger is set to TTL mode and not manual (M) mode. Check the Godox X3 manual to make sure it’s configured correctly. Drastic action, If you want, resetting the camera to factory settings can help determine if this is the issue.

Hi, thanks for reaching out. Unfortunately you can’t. But you can transfer data like in the video. This adapter is primarily designed for video output and charging, not for connecting USB peripherals like keyboards or mice. However you can use Bluetooth for keyboard and mouse.

@@TossSong its strange. In the website of apple the description is '' The USB-C Digital AV Multiport Adapter lets you connect your USB-C-enabled Mac, iPad or iPhone to an HDMI display, while also connecting a standard USB device and a USB-C charging cable.''

Okay, I will test again when I get back from work. There might be in the iPadOS or iOS update that allows this. When I first bought it I remember testing it, didn’t work. But try it again.

@@TossSong i want to use for m3 macbook air. Thanks for the answer my friend!

Thanks for your patience. YES, it does work! I first tested a keyboard on the USB port on the adapter connected to my M3 MacBook Pro. (As you know the C port is for power delivery only.) Then I also tested on my iPad Pro, it even had an indicator icon for keyboard connection, never seen that before! So it works on both. Also tested a Mouse too, works. Again, I remember testing it when I first got it, nothing. Things must have improved/changed. I happy and glad about this. Thanks for questioning it.

Hi, thanks for reaching out. The Godox X3 trigger typically uses a 2.4GHz wireless system and is designed to work with Godox's own wireless receivers. It's not typically used with USB-A receivers. If you're looking to connect the X3 trigger to a computer, you might be thinking of a different type of connection. The X3 trigger usually connects directly to a camera's hot shoe or sync port.

@@TossSong I wanted to connect it to the Vistro AR400 Lamp which dosent have receiver build in ;/

Thank you for your comment. Great observation on both points! Yes, this is true the K06 does have the keys packed closer together. The i4 keys are more apart and a little more comfortable. I do feel the difference between them. And also it’s true that the i4 is more clicky and can be annoying if used often. 👍 However they are not too bad in my opinion. And you can get used to either one. I do like them both.

@TossSong Have you done review for the K12+ or have you tried this one? 😀

Thanks for recommending. I haven’t tried it. I definitely would do more on these mini keyboard for sure. And I’ll look into the K12+ too. They’re so interesting to me. Hope you come back for them.

@TossSong I will definitely tune back in, thank you for letting me. I'm interested to know if there's a backlight on thus and the quality. 😀

Hi, thanks for reaching out. It doesn’t do pen writing, but in note app, it can be scribbled with finger(s). However, it’s VERY slow to the point where it’s not usable. Therefore, it doesn’t detect your palm at all.

Hi, thanks for reaching out. I believe you would have to allow access on your computer. I'm not sure. Let me know in more detail.

@@TossSong I can only control the osmo pocket 3 device through the mimo application. if I want to use only the device, I cannot film or take photos. A padlock in a border appears on.

I see try the following: Swipe down from the top of the touchscreen to access the quick settings menu. Look for the padlock icon in this menu. Tap the padlock icon to unlock the device.

@@TossSong I'm sorry, but I didn't find this option (locked) in the quick menu. :((

Okay try the following, from DJI support: 1. Restart the Device: Power off your DJI Osmo Pocket 3 and your mobile device. Then, power them back on and reconnect. 2. Update Firmware: Ensure that both your DJI Osmo Pocket 3 and the DJI Mimo app are updated to the latest firmware and software versions. Sometimes, issues are fixed in updates. 3. Check Mode: Ensure that the camera is not in a mode that restricts photo or video capture. For example, some modes might lock certain functions. 4. Reset Settings: Go to the settings menu of the DJI Osmo Pocket 3 and look for an option to reset settings to default. This can sometimes resolve unexpected behavior. 5. Reinstall the App: Uninstall the DJI Mimo app from your mobile device, then reinstall it from the app store. This can fix potential software conflicts. 6. Reconnect the Device: Disconnect the DJI Osmo Pocket 3 from the mobile device and reconnect it. Ensure that the connection is secure and recognized by the app. 7. Check Permissions: Make sure that the DJI Mimo app has all the necessary permissions enabled on your mobile device.

Hi, thanks for reaching out. Have you removed the lens cap, just my first thought. Some lenses have a mechanism that prevents the shutter button from being pressed when the lens cap is on. I personally have not had any problems with the shutter. Let me know.

@@TossSong Yes, and I reset the camera and swapped lens, it's slowly responding now?

Maybe something is wrong on your end. The shutter on mine perfectly fine. BTW, I meant the lens “Cap”. Have you removed it? Some lenses have a mechanism that prevents the shutter button from being pressed when the lens cap is on.

@@TossSong Might be a software glitch? It’s working fine now. Just have to set up my camera prior from resetting.

Great, glad to hear it’s working again. Seemed like a small glitch.

Hi, thank you for reaching out. As for every day tasks, yes. Yes for sure, as for tablet use. However, as in my video, I have Not tested with a SIM card to use as a phone. So, I can’t more about it. I do know that it will only be capable of 4G LTE.

Thank you for your comment. I'm very happy that this can help. Glad you got it working again. 😀

Thank you for your comment. I’m sure you’ll the adapters very useful. The controller too, of course. :)

Thank you very much for your nice comment. I'm really happy that I did well with this video, and I'm glad you liked it. 😀

Hi, thanks for reaching out. Try to balance again and make sure all the axes are unlocked. Normally, if not balancing correctly, the calibration will fail. Let me know how it goes.

@@TossSong Thanks for the fast reply! I will try this 🤝🏾

Hi, thanks for your comment. I have been using the app for several years now, I’ve not had any issues. There are only two things to press, one is the pump number and another is “confirm”, but Yes, if you’re in a small gas station it can get crowded.

Hi, thanks for your comment. Yes I agree, one gripe about it is the rumble motor. It’s audible and not as strong and intense. When increasing the rumble intensity from the original 60% to higher like 80%, it’s better but still audible. Overall, I’m still very happy with it with all other features on it.

@@TossSong Yeah, I really really like it. It's just this one small issue that I can complain, but I'll eventually just tune the noise out and get used to it. Thanks!

Thanks for your comment. The battery life is good, not great. When setting the screen brightness to 40% or below, it can be great. Out of the box at 80% brightness is okay to good. And yes, I agree about the build quality, the SIM stray is a little fragile too. Like you said it comes with lesser known brands. But it’s performance well thus far for me.

Thank you for your comment. I agree. I have had to buy several adapters for this. I assume they also distribute to many countries that are still using computers/laptops with USB-A connectors.

Hi, thanks for reaching out. Unfortunately, it’s not compatible with Xbox or PS5. You would need an adapter for it-according to gamers. I’m sure you could find it online. After, Let me know how it goes.

Yes, there is a post here under the by a commenter (with many thumbs up). You can turn off cellular and Bluetooth and try connecting again. It should work.

Hi, thanks for reaching out. Let me know if I’m wrong, I assume you’re referring to the sticks replacement. Since the sticks are uniquely designed, I assume you would have to contact Flydigi for that. They are proprietary.

Hi thanks for reaching out. I could only think of rebooting your computer. Have you tried?

Thanks for commenting. But No,no flash.

Hi, thanks for reaching out. I’ve never used KK2, but from my research and experience using the 3, I would say KK3.

Hi, thanks for reaching out. Everything is good with the touchscreen on my camera. Something happened on yours?

I found out how to do it. I was under the impression when I first received the camera it didn’t have touch screen. What a bummer, then I saw your video. lol

I see. That interesting but funny. I still have an older Sony model that I sometimes press the screen when I know that it doesn’t have that feature. :)

Thank you for your comment and for sharing. I'm glad you got it working. Sony could do better implementing their app.

@@TossSong your welcome! I agree, I can’t even download videos directly from an as card, I have to go through the app. And if I Interrupt the process I have to re-connect, and start all over again.

Yes, I have experienced that too. :(

Sorry, it was one of my early videos. Thanks for your input.

Thank you for your comment. I’m happy this helped.

Hi, thanks for reaching out. If it’s this brand, pull it off from the back first. This brand will endure the stress when removing. Don’t be afraid.

@@TossSong and if you have time could you make a video of how to take it off?

I found this video that shows you how to remove it. It’s at two minutes in (the blue silicone cover removal): kzbin.info/www/bejne/rmfOh31oo9SCfsUsi=nfNJ1rBYEew7vyh2

Thank you for your comment. I agree, it could be a bit finicky to upgrade. But I’m glad this was helpful.

Just for context, this is the second X3s trigger I've bought because I thought the first one was a lemon and I love the design and UI of this trigger so much.. I wish that it worked correctly. 2 major problems I had (hoping the firmware fixed - now bricked), is that none of the Godox triggers recognize Sony's built in Wireless Flash ON/OFF feature, so regardless of what it's set to, the trigger fires. As a real estate photographer who needs to bounce back and forth between flash and ambient lighting, it's extremely frustrating. And 2), 90% of the time I turn my X3 ON/OFF for this purpose, it disconnects from all my flashes. I'm often running 4 flashes and it gets very time consuming trying to work with this trigger. Now that it's bricked, it sits in my closet, what a waste of money. I contacted Godox support but provided Tier 1, lamo support. Such a huge let down as this trigger is sexy AF.

Hi thanks for reaching out. I see, could be frustrating. Hope everything turns out well. Next time, if it seems to be bricked, when the screen goes blank, you could try and press and hold the knob for a long bit. Keep doing it intermittently, then plug it in. Or open the Godox Launcher on the computer first, then plug it in. Again try it intermittently.

@@TossSong I eventually received help from Godox's support team and they provided a successful solution, "The transmitter screen will turn black if abnormalities occur in upgrading. The solution is to re-plug the USB cable, press and hold the test button and the select dial at the same time, then release the test button only, until "Upgrading" appears on the interface, then the device can be upgraded successfully through USB cable." All that worked for me, now I'm hoping the firmware update made some huge improvements on connectivity. For those wondering, I do see that legacy hotshoe has now been added after the update.

Very glad you got yours back in working order. And Thank you for sharing this. There will definitely users searching for the solution.

I see, I assume it connected okay.

Thank you for your comment.

¿Has intentado actualizar de nuevo? Puedes sobrescribirlo y no causará ningún problema. Déjame saber cómo te va. Have you tried and update again? You can overwrite it and won't cause any issues. Let me know how it goes.

Thank you for your comment. Glad this helped. :)

Yes, absolutely. Or you could continue to take pictures with the one DAT file in it until you’re ready to format. Either way you can.

Hi, thanks for reaching out. Yes, here on Amazon. a.co/d/01Ot63A0

@@TossSong thank you 🙂

No problem.

Thank you for your comment, appreciate it. 🙏

Thanks so much for the kind words and awesome tips! I'm stoked that my video helped you out with your Leofoto setup. Your insights on rotating the rear mount and modifying the lens support height are super helpful additions. Appreciate you taking the time to share your experience - it'll definitely help other viewers too. Thanks again for being a part of the community and for the thoughtful feedback!

Hi, thanks for reaching out. I would put them back in the case, and then try again. (One my run out of battery.) If still, unpaid and repair them. Also try turning off & on your phone.

Thank you for your comment. The cable I use came with my Canon PowerShot V10 (with a “magnetic USB-C adapter” from Amazon). You can use any as long as it’s data transferable. I use a variety even Apple Thunderbolt 3 cable and even a generic brand. They all work.

Hi, thanks for reaching out. From there support site, the utility app provides several functions: 1. Customizing focus settings 2. Adjusting the focus ring's rotation direction 3. Updating lens firmware 4. Fine-tuning autofocus behavior Regarding lens calibration, the Tamron Lens Utility is not primarily designed for calibrating focus accuracy. If a lens needs calibration due to front or back-focusing issues, the utility itself won't likely fix this problem. For these Tamron lenses, I think real calibration would need to be done by an authorized service.

@@TossSong ah I see. I see the 100-400 doesn't have the USB connection. So would you go about updating the firmware w/o having a USB connection?

For the 100-400mm, you’d need the “TAP-in Console” which I’ve never used. But if you look into it, I think you could do. Shouldn’t be difficult.

Hi, unfortunately not quite. It fits all around except the camera area.