Dame it’s a shame I’m from the UK I’d snap one off them 3d printed air filter right out of your hand 😂 awesome live as usual 🤙👍🏻
@GregTc200850 минут бұрын
Put mine on layaway
@lawrencewinter2 сағат бұрын
Kyosho FW05RR came with foams. I have one waiting to build up :). As always, sorry I couldn't make the live, but enjoy the content. Up the nitrogang. The clutch is a standard bell clutch type, whoa - oldschool. This thing must have changed the game
@s.o.sSavage4 сағат бұрын
Just having a catch up bro👍🫡💯
@narongrachmareongsit19787 сағат бұрын
❤😂😂😢
@hybrid324947 сағат бұрын
Thanks for watching my friend!!
@dale53038 сағат бұрын
Hey bro congrats on many new subscribers, being on of the original less than 1000 subs back in the model rocket days, its awesome to see you doing good bro keep it up!
@hybrid324947 сағат бұрын
Hey man! Thanks so much, I remember the model rocket days too, ahah and I remember all your comments throughout the years! Let's hope the pursuit of Nitro RC and Rocket greatness never stops here! Thanks again!
@dale53037 сағат бұрын
@@hybrid32494 it wont stop on your watch man, your one of the most dedicated people to hobby its awesome! Keep pushing and have a great weekend! 🇺🇦 🇺🇸
@Lucas.stalcup8 сағат бұрын
NITRO GANG
@hybrid324947 сағат бұрын
hey my dude! Sickeing nitro right here right!! Gonna clean it up and it will go on its first run soon.
@davidsinclair89529 сағат бұрын
Sounds good
@CrazyDadNitro-2.021 сағат бұрын
Dropping inn to check and see if you are ok? 👍always. I guess i have missed your lives. Stay positive . Stay blessed. Best wishes to you and uour family 😊🔥💯
@TexasHillКүн бұрын
I wish you would upgrade the engine to the Zenoha you bought for it way back when... It would RIP for days !!! prob do like 40mph too !!!
@hybrid32494Күн бұрын
hey bro! Yes, that is my next project actually. After the last track video my carb is likely dead, so now is a good time to swap engines!! Great comment bro!!
@Phillip-lb3bxКүн бұрын
Got a nitro slash a month ago b-day gift. My first RC truck. Last RC was miss america plane with string controller. Circa 1974.
@olivierplayer1633Күн бұрын
i never saw a video of the savage quad
@hybrid32494Күн бұрын
Hey man, thanks for checking out this video. Just to let you know the HPI Savage was available with the quad body. The chassis was still exactly the same. It was just a unique quad body with a rider on top. Unlike this Kyosho, it literally was not in any way different than the regular Savage normally available to everybody.
@olivierplayer1633Күн бұрын
kyosho was one of the first nitros .
@hybrid32494Күн бұрын
yes bro!! Kyosho was in the forefront of nitro tech back in the day!@@olivierplayer1633
@TheDemonic38Күн бұрын
The traxxas 3232 plug are garbage run a OS L.c3 long reach, hot plug there expensive but there awesome , that ZD is mint bro 🤙
@BASH-RC2 күн бұрын
Just had the same thing happen. Then changed out to the included gears did the same thing.
@RcOffroad95132 күн бұрын
Sickening!
@CrazyDadNitro-2.02 күн бұрын
Nice. Woooo. Crazy Dad will be contacting and paying for spur gears. Now that is positive nitro parts at its best. Awesome. Thank you for sharing 😊
@hybrid324942 күн бұрын
You got it, my dude, as you know, anything to help make Nitro great and positive like they deserve to be. I’ll be happy to send you a printed nylon spur gear for a Revo or slayer in the future, for testing. Could be interesting.
@CrazyDadNitro-2.02 күн бұрын
@@hybrid32494 yes that would be awesome. I will buy one for a Revo. Or the slash. I will test it and post the out come. Sounds great. Yes sir wooo.
@alantaylor3532 күн бұрын
🤔 Hmmmmm... You could shave your balls like that.! 😉 😉 😂 😂 👍 👍
@johngoodwin43533 күн бұрын
HPI all the way!! 💯💪🤘 Sickening!
@JayRose9043 күн бұрын
Best thing about Traxxas is they will send you a brand new one!! Just contact them!! And they buy back broken motors and ESCs at 50% retail cost
@eduardojimenez84933 күн бұрын
I’ve had both of mine for years and never had this issue. My opinion the Xmaxx is the best RC.
@ramos.nitrorc3 күн бұрын
O.S. engines have the best idle!!
@hybrid324943 күн бұрын
100% right, and Single Stage baby!! ahaha. Idle king is the OS!
@mokka87273 күн бұрын
If the engine is "similar" grade to Novarossi, it worths, looking forward after you run the car and conclude if that is true...
@nomusicrc3 күн бұрын
1:13:15 why weren't the wheels spinning freely
@zedtap45283 күн бұрын
How would the motor brake with a clutch ? Tear shoes apartt if it did
@JosiahNielsen3 күн бұрын
I've been there.😂😂
@glenhenning92613 күн бұрын
Shame all you did were warm up laps, check out the 1/8 scale on road race videos and watch these things RUN! They're UNREAL!
@glenhenning92613 күн бұрын
This is not a "pan car"! This is an example of the latest tech full race on road nitro. A "pan car" is what the very first rc on road cars were- NO suspension, solid rear axle and 2wd only made from a slab of fiberglass! You could buy the basic kit for around $60 plus engine which would have been a converted airplane engine with side exhaust, but that was all we had at first! Oh, throw in an AM (!) radio that glitched non-stop, we actually had friends on bikes ready to chase the runaways! No fail safe until the 90's, but hey- you could put an 1/8 scale on the road for maybe $200 or less. Todays on-road racers will cost around $600+ for kit, plus body, plus wheels/tires, plus radio and servos, plus engine. A true 40,000+ rpm 10 port race engine was $600 even 20 years ago, so yeah, when you see a full on 1/10, 1/8 racer ready for competition you're looking at around $1,500+, and that does'nt include tons of spare parts you'll need. These things go thru belts, pulleys, gears like crazy. Oh, and how much is 30% nitro these days?! Turbo glow plugs around $18 now- ONE lean run and you'll be replacing it. One grain of sand in the pulleys will split the belt, destroy the pulleys. Thes things are for fully prepared and freshly blown clean race tracks. But what a freaking BLAST they are! Did this every weekend I could for years!
@HumlsHobbies3 күн бұрын
I had the same problem on mine! Ive been through 3 sets of gears.
@Matt.hurst19803 күн бұрын
That's a ripper
@hybrid324943 күн бұрын
Hey man, thanks for checking out this video. Yes, this thing run surprisingly well although I would say it needs much thicker center diff fluid because you could tell the front wheels are really loose and the back get much less power as it accelerates.
@radiocontrolled_cars3 күн бұрын
Skill issue
@hybrid324943 күн бұрын
Hey buddy, thanks for checking out the short. To give you some background information, this truck went on its first run out of the box and the owner hit the brakes at about 25 to 30 mph. It did one single front flip and stripped the gears. There were no jumps and involved otherwise I would have clearly stated that in the video and you can see the truck is like new without any dirt on it at all.
@champadas10674 күн бұрын
ohvkh iufcchgk j kvx k cfi fkckg jc kv jfcklg jkcckf na
@Awnan4 күн бұрын
That happens, Traxxas Tough! I hear Hot Racing make some really durable steel gears for it.
@travisritenour18494 күн бұрын
Your landing under power
@CrivRex4 күн бұрын
Hey Hybrid! Do you have any recent vlogs on breaking in today's nitro engines and how to maintain them long term? I know this topic has always been controversial with different methods but I see some of those older nitro engines still running and I would love to keep my Traxxas 3.3 running for years to come. I recently tried a break in method and the motor locked up and broke the piston and crank case on the third tank.
@susantidwell71724 күн бұрын
How can I get the big red triangle with ! In it to clear off?
@malik-b-khan59644 күн бұрын
What about Rovan 36cc which is buggy asi?
@RCRoads4 күн бұрын
For the cost of the XMaxx that should never have happened. Hopefully you get it sorted out. Traxxas should give you new gears some cash back for your labor. Or you could take it back to the store you bought it from and have them repair it but then your without a car for a couple of weeks.
@lkwdryan4 күн бұрын
Did they check the gear mesh before running it? I go through everything on my RC trucks - even my real vehicles when I buy them. I trust no one, always always double triple check!
@Aussieknuckleheads4 күн бұрын
If it's not the spur &/or pinion gear stripping, its the esc blowing up 🤦🤦
@user-xk1hn4ye6b4 күн бұрын
You pay a lot of money. Then you work on the RCs . Money breaks seems like it really doesn’t matter what brand RC. money break. Truck sells around 900’00 dollars take it out of the box run it for the first time it breaks.
@vitron014 күн бұрын
What a dousch
@hybrid324944 күн бұрын
Based on what?
@christophermacmillan74385 күн бұрын
That was sick
@Tad3r5 күн бұрын
Turn the brakes down. I had to do both my xrt and xmaxx because it's so hard on the pinion
@tonycoffee73355 күн бұрын
Back in the day I had a RTR-3 Camero body. I put a 2speed in it. Good memories
@Krazee4honda5 күн бұрын
Did you invite your neighbor to come along?
@hybrid324945 күн бұрын
LOL, I should right! Just trying to spread some NITRO RC joy out there you know!
@tarekkhoury53845 күн бұрын
One of the best sought after Nitros ever
@hybrid324945 күн бұрын
thanks you my dude!! Super rare to see a stock one of these today, most have been modded and really dont represent the original out of the box experience anymore. Ofcourse a nice pipe wold make this a better car, but stock is god enough for us! Nitro Gang!
@davidsinclair89525 күн бұрын
# kissing but
@hybrid324945 күн бұрын
ahah, yes ! 4 real!! Not on this channel, we only kiss the nitros!!
@JavaRacingCo5 күн бұрын
Traxxas needs to fix this! I keep having issues with mine too!