I'm looking for just the invertor mine in 2014 had a blown fuse replaced and still doesn't work so I'm hoping if I change invertor it will have power ???

Cool videos. I used them to build my first stroker. Your sensor is pointing away from the block instead of parallel. Mine too. Even a bit more than yours. Is this because of the beefy cam?

Will it work if my vehicle is stiuck in reverse?

does this work if the vehicle doesn't have a key?

Why does mine not do this?? What issue do I have, thanks

What causes a 2017 to do the rpm is going up and down and. Is it a button on the side of the gear shifter my son said it has button on it with a + on it xo I need to push it

On my kids' car it still won't crank the starter. Any other thing I can check??

I have a 2017 Silverado 1500 LS, what clock spring will I need? The one with 2 clips for the airbag or the single clip? Thanks!

Thank you for all the time you put into your videos. I have a silverado and you helped me make a few uogrades. And now with my Camaro. Thanks brother.

Thank you

Would a pcc fit in there or just a hand gun?

It doesn't work for me. What else can hold the gear stick ?

What is your neutral lever not working

Just saved me $15 by not having to buy a hole punch set. Thank you!

Great video. Literally had me on the wrong side of the car and then I saw that you clearly were not on that side. At first I thought maybe you were in a different country. Anyway thank you

Helped me get a car out of a parking spot so I could jump it. Tip if you pinch the rear of the boot and wiggle it and lift it comes out nicely.

See there. Shade tree mechanics have more common sense and knowhow then most high rate shops! This looks like something I would think of. 😂

Mines still won’t go to neutral

This doesn’t even work for me

what do you do for a 2015?

As soon as he said wife’s paused made this comment and left.

Thanks straight to the point

Where did you buy the Homelink< my truck also does not have it?

I have a Audi Tt mk1 with this issue, what size r ur screws, also do I have any recommendations for videos about the removal of these

howdid u build it

Thank you so much and I found my gold stud emerald in that cup holder hole holler😅bc I removed inserts at a time to clean 'em n procrastinated on putting them bk asap

Should this also be the same for a 2013?

You’re a Legend !! God bless you !! 😊🙏🏻👍

U bought an oe fuel filter they sell the o ring separately that dealer for yah

Thanks for the video! I was able to help a couple stranded in the middle of a intersection today.

What if I accidentally put car on park while driving ?

Short and straight to the point. I like it

Your video saved me from calling a tow truck. Many thanks and have a wonderful day!

I'm about to order a balljoint press. I see there are very small ones. What's the minimum length of the tool I'd need? Thanks!

Size of magnets would be nice added information or even links to the magnets on Amazon

Great video just bought one, and the previous owner didnt know the code either so thanks

Would I be able to do this on a 2018 Silverado 1500?

Would I be able to do this on a 2018 Silverado 1500?

Can you tell me which of the two white plugs in the BCM you tapped into? I have a 2016 Silverado 1500 - have the switch the wire harness, but trying to get the hook up to work. I have two white plugs in the BCM: one right next to the brown plug (which already has OEM wire in slot #12) and another on the end of the BCM, closest to the brake pedal (and slot #12 is open on this one). Just trying to verify for sure which plug I need to try and tap into.

Hello, what is this book, where can I see it in full ❤

I love you…

I didnt even know that the push button thing could fail like that. Popped it off and the key worked just fine. Thnks for vid!

I like the lenses. Do you remember the company that made them? I have USR lenses in my XJ and the quality is less than OEM.

Thank you sir KZbin for another win baby Same problem, my rock fell off when I took the tire off and was laying on the inside of the tire. Luckily I took the tire off and layed It against my basketball hoop. After checking in between the rotor and plate I didn’t see anything. Checked the inside of tire and there it was.

Good video. I just change the fuel filter in our 2022 CV515 and there's a few things different. The bleeder screw is on the bottom of the housing and you need a T30 torx head to open it. A little bit of fuel comes out, maybe 1/8 cup. Then to remove the housing that contains the filter, I needed a 1-7/16" socket. In metric that's about 36mm. My socket was 12 pt and a little bit loose, so maybe a 35mm socket would be better. Certianly 6pt is preferred. Once the housing was cracked open a couple of turns, a lot more fuel comes out of the bleeder screw. When it slowed to a very little trickle, I closed it and then removed the housing that contained the filter. A lot more fuel was sitting in there. A cup full would be my guess. The replacement filter I picked up from the International dealer, it contained the large o-ring and a small o-ring. The large one was for the housing. The small one is for the post that extends down into the filter. I also took off the bleeder screw to check for presence of an o-ring and there is a one there, but its more like a flat washer than an o-ring. That did not come with the filter so I left the original in place. With it all tightened up, I followed the remainder of your tips. Two cycles of the key for 30 secs each. I could hear the fuel filling up... and I'm 3/4 deaf. 🙂 Started the truck and it ran just fine. I then navigated to the fuel filter life monitor in the DIC using the buttons on the steering wheel (different that yours). I held down the the centre button (check mark) until the dash beeped. The Oil filter reading doesn't change, but when I shut off the truck and started it again, the fuel filter reads at 100%. 👍👍

Hey how long does it idle up at 2000 for?

Just completed this yesterday. Excellent detailed instructions! I’m not getting any power to the steering wheel controls or horn. All the connections are tight and the heated wheel fuse is good. Would you suspect a faulty clock spring?

Bro, you just saved my life

Thanks for the tip. My fourth number was scraped off the sticker but i played the guessing game until i figured it out.

Mine had this problem I was stuck for a hr before I thought to unhook the positive on battery for 15 seconds , IT WORKED AND MY CAR WAS BACK ON THE ROAD