You have covered all the things that justify me spending the extra money real soon

Well im looking at kioti ls a mahindra around 50 hp what’s y’all’s thoughts

Well I have severe asthma and allergies so I guess that’s all the reason I need

One thing I would comment with regard to the skin cancer issue, look into getting high quality tint for the cab windows. Good ceramic tint blocks UV rays and heat, not only making the cab AC even more effective, but also keeping you safer without as much need for sunscreen. Tint can be had with 70-80% VLT as well if you don't want the darkening effect. It's not much different than tinting car windows/windshields.

there are a few companies on ebay/Amazon that offer braided hoses to replace the entire fuel, & evap lines; usually $60 - 120ish for the kit. the leak is almost always in front of the left rear tire, right next to the exhaust; you would think GM would i$$ue a recall.

Yeah. Just scratched the hell out of that paint

Without any implementation on the back that is a little sketchy. SLOW MOVES!!! Hey fellas both of you stand on my third arm -HURRY DANGIT!

Put some cardboard for softener around forks and bottom of safe hate to cut a nylon choker and scratch up new safe

you good bro ,just due it

Too bad the new K7340 does not have roof vents on the new machine. What was Kioti thinking. They need to fix this. with no ceiling vents the AC would not work and the defog would not defog.

To cab or not to cab. that is easy just live in Spokane Wa. Yup done deal!

The only problem with this is that you piss the weeds and grass off and it grows back worse than it was before you fixed it lol

There’s lotta satisfaction in transforming a grown-up pasture. Enjoyed👍

I'm allergic to bee stings and only have 1 lung working properly. Heat, and ac are very important to me.

Did you trade the bad boy for the kioti

When you hook up attachments, shut off your motor, release the pressure in the hydraulic system by moving the valves after the motor is shut down, then make connect, or disconnect your fittings. Goes a lot easier, and a lot less mess. Enjoy your new machine!

In Texas I can confirm that that happens every single day

I'll add one more log onto your pro-cab fire: most cab tractors have switches or levers to raise and lower the 3 point hitch right there handy at the rear, since climbing back into the cab to do so would just be dumb. I hear they're very useful when attaching implements... 😊

All that selling and you dont make a dime. I am now a subscribe to your channel

Agree 100% I have the 3520.

Thanks for the video, my main reason for the cab was snowblowing but my New Holland 25S cab doesn't allow for a backhoe. Something to consider if you're shopping for a machine and yes some tractors can have both.

It depends how long your money is. If you can Afford it buy it if not use the money to buy attachments.

I'm looking to acquire a TLB soon and having a cab is not only a luxury, but almost a must imo. So many benefits with only laughable downsides, plus Ive heard it saves the environment.

Your video just cost me $8,000😁

Wait?! It rained??

👊 P r o m o s m

How would you describe the difference in your box blade and the land plane?

Well done.

Thank you for posting and very helpful. Took the advice of Ben below and picked up a set of 3 leg oil filter tools. Never knew about them before and thank you both! Have a CK3520 with about 35 hours on it.

I’ve had a set back…but it’s still game on!!

My number one reason for a cab tractor, because I want it!

You are making me wish I had bought a cab. Bought a CK3510 three years ago. I just don’t use it enough to justify the extra expense. But, I do worry about a bee attack. There is usually about one of those a year within a 20 mile radius of where we live. And, I do have skin cancer worries. OK, you have convinced me. Now, I am going to show this video to my wife. Wish me luck! If it goes badly, it is all your fault!

Great video. I have the same tractor , living in a cold winter zone and hot , mosquito and black fly summers. I would not consider an open station at all.

Its a no brainer. I love my cab tractor. I cannot work for long anymore in the heat or cold. Now that is not an issue anymore.

I agree with you. CAB is worth every penny. I have a 2020 ck2610 with cab and all you said is true. I had a problem with the windows fogging when blowing snow, the solution is cracked the back window open with the latch closed so it dosent shut back up, problem solved.

nice to have a cab when you bush hog a bee nest! i play with firewood logs so i needed ROPS. id knock the corners off the cab for sure! i have a 2022 TYM T494, i had a 2021 NX4510 i know kioti makes fantastic machines but i got a covid machine with a bad tranny and the NX is E-hydro they had a bad batch of solinoids in the tranny. very few dealers can deal with an issue like this. i say in the bang for buck catagory the 3 best are kioti tym and yanmar. the one thing i like about them there KU-BOATERS is the hydraulics. you can lower and curl at the same time. other than that i say the tym and kioti crush KU-BOATER loader lift and 3 point lift. hyd. flow is also a bit less in KU-BOATERS the grand L was 18k more. my pockets were not that deep.

Great video! I could not agree more, especially where the stupid allergies are concerned. I have a CK2610 with cab, and will add that where the view is concerned, the mirrors add so much behind that it is worth the small loss where the A-pillar blocks off. Also, regarding the glass keeping people on the ground from talking to me, I have taught the kids to stay back at least 20 feet till I stop and open the door and look right at them. I see it like an added safety feature, especially when using pallet forks and lifting or anything that might tip me. Enjoy the comfort of your tractor cab! I have never looked back after getting mine with cab!

hay man i didn't forget about you .

50 hours in a year? I put 50 hrs on my CK the first week I had it lol

Should’ve put it on his mustache too 😆

Are you a member of the crown Victoria association I have nice articles on people with their cars they love and you can find parts and technical advice

I grew up in a 50's car show every weekend. My dad and grandpa rebuilt cars from the frame up, but I do NOT have the patience for it. I'm mechanically inclined and fix stuff, I just don't have time for slow projects. I'd rather watch someone else's headache and journey from my couch. Looking forward to it. Great job.

Did you get rid of the y block in transmission enjoy watching you guys work together are 4 year old is in the garage all the time working with our 55 and 56 fords keep up the good work

You two are fearless ! So glad y'all shared this. I'm definitely not fearless, but I feel alot better about tackling mine now. Thanks. Can't wait to see you guys cruisin.

nice work.I just bought the same Kioti and have a gravel driveway myself thats a mess right now, I was thinking I need a box blade but now I think I need a land plane. so is a land plane basically a a better heavier box blade? Or is there a different use for a box blade? thanks, Tucker

Not sure how you work in such a clean and spacious environment…you really need to clutter that place up… … …

Love that I found your channel. My wife and I have been married for 48 years now and the first car we bought together was a 1956 Ford Victoria four door. It had the 292 Thunderbird with a factory four barrel to motivate her. She was red and white just like yours! Man I loved that car, but kids came along and ruined everything!🤓

Look forward to the '56 videos. Especially looking forward to the front cross member, as I unfortunately have that to do on mine as well. You two are gonna have a really cool ride.

Back in 2007 my buddy bought a brand new kx 450. He was a good rider but after a few days on his brand new bike, he told me that it scared the hell out of him and that he didn't want to ride it any more. I had him ride my crf 250 and he loved it so we ended up trading bikes. I absolutely loved that 2007 450. It was hands down, the most powerful beast of a bike I've ever ridden. It took my riding to a new level as I was able to jump gaps that I would never try on my 250. Instead of scaring me, the bike gave me confidence. The 2007 KX 450 was an absolute beast.

Seeing you put this together makes me wanna go join you on this project! It’s starting to look like a real functioning car!