Do you only have the exhaust done or is there other things that you have done..?

What did you use to cut the opening?

Nice truck man. We have very similar taste. I'm on the hunt for a MK4 Supra now.

How did you get the tip to sit so flush and tight against the body of the truck? That looks clean

How big is the exhaust tip

I had to add risers to get the Speed V seats up higher in a 71 Camaro, so I guess it is try and see , your results may vary

When you describe the sound part of the wheel bearing, that’s exactly what mine sounded like too, so maybe it’s a super thing lol but I’ve got my whole hub assembly off. I didn’t ruin anything, but my bearing literally came apart exactly like yours did that in a race fell out when I pulled the axle out so it sounds like ours were pretty worn out the same way. Cause I had very very slight play side to side on my tire when I wiggled it doesn’t

This is my first time doing one of these I’m about to take the emergency brake off, but do you have to take the axle love? I just don’t see why it for pulling the assembly out towards the outside you know what I mean?

isn’t it only .5” difference not 1.5” u said the original 1 was 1” and the new 1s were 1.5” so the seat would only sit .5” higher not 1.5”

Link?

Thanks for posting this. The comments all agree. Biggest waste of 370 dollars !!!!!!

This catch can has to inlets or one Inlet and one outlet ?

Hi Jose hope all is well First thing I noticed was the factory stud ring that holds the rotor that itself will trow your balance off removing those will eliminate vibration to nothing at all or barely noticeable. God bless

Having the same problem with mine in the 1965 Mustang Fastback.

hey i just bought a mbrp tip, what size length is that?

Use wood to avoid metal to metal contact between your jack and the frame.

Be prepared to never listen to the radio unless the trucks off. Goin down the freeway can’t hear anything but the drone whispering in your ears

I have these , they came with my VELGEN wheels for my 2015 Roush stage 3 mustang when I ordered my wheels.

So you’re able to use the stock seatbelts or i saw they have the 3 point retractable belts

😮😮😮

Beautiful truck and it sounds amazing with that muffler delete! I can't wait to get a cummins for myself one day

Thanks for the video! Unfortunately, I had to order some custom hub ring spacers (104->78). Wish that mine were a common size so I could've saved money, but I hope to have as good a results as you.

Jose! Kind of in the same boat myself, I threw in the same springs you had at the start. When it came time for tune day, on lowest setting (wastegate pressure) my car made 701 @ 19 psi on 70% ethanol, which is a bit too much for the 91 oct we have up here at altitude, I need to back off the springs a bit too so I can boost on pump gas without worrying. We tuned to 35psi and I told my tuner that's enough lol, so thinking the 15.xx psi spring setup would be good. Been a while man, I hope all is well with you!

We need an update

Struggling to get my hub out???

Thank you for making this video, I'm definitely making my own brackets instead.

How do the 335s hook ??

Was it deleted or anything before you did that?

Those seats are way too big it seems

Love the sound of the Flo pro 5 "!! Where can I purchase that exhaust system? I have white 2015 3500 8 long box I just purchased recently my dream truck! Thanks for your awesome video's ! 👌

What tuner are you using?

Haha, I just found this video after having my NRG seat+planted bracket sitting in the garage for a year(for a civic si ep3). I went to install it today an it was the most painful install ever. Then at the end, the seat was too far away. There was no way to push it closer unless I attached sliders (if I understand correctly). I just ended up putting my stock seat in until I can figure it out, what a waste of $180.

just found this video, i bought the planted brackets for my Porsche 996 and they now sit too high about 1.5 inches, came to me last night i am going to grind off the part of the bracket that the bolts fasten to the car and redrill the holes so the bracket will sit flat.. and that will lower the back end of the seat.

What year Ram?

nice care for the truck looks great and sounds good

Great interview of that fb .I would like to see an interview on lexus sc300

Nice and quiet gotta like that eh Sonny

Did you order the talls or the lows? They make two separate kinds

Love the truck and i love that sound. keep the boost up man :)

You always think it's gonna be easier than it is lol. Thank God you had the crocs on. I only work on my shit with my crocs on. Sounds good bro!

Jose I just bought my 96 dream Supra and I appreciate you showing us the way here. Awesome video and I appreciate the tips.

i have the stock 4 inch exhaust tube and deleted, do you think getting a 5 inch is worth it. i want my truck as loud as possible

Info on where I can get that done to my cluster plz 🙌🏼

My boss has his 2019 dually straight piped and deleted and pulling his 35 ft gooseneck with the windows up you can’t here that much of it, know when he goes to 5 inch from whatever it is know, I think it’s 4 inch rn, I t will be a lot louder so thst will obviously drown more

Still have this thing man? It's been a while and I'm not on FB anymore so outside of Supraforums I feel like I live on an island lol.

Do you have to tune it in order to do a turbo back or any exhaust mod in general? Want mine to sound like this but dont really want to void warranty also.

Your time and energy is needed in aerospace production, and environmental protection.

its really just an alignment tool to help you get the wheel centered, its possible to get lucky and they go on prefect without the rings. probably why when you swap the wheels around you think it gets better or worse.

Stupid ass video, next time make sure to show the car and the tire zoomed out what the fuck is the reason of this video

Does the MV-R and MV-S wastegate use different spring combination for certain PSI