Joe Elementz 1.2M

Пікірлер

@yuan-jia 8 күн бұрын

Does the LEMO port of the PYXIS charge the BP-U battery when connected to AC (or D-TAP → LEMO) ?

@JoeElementz 8 күн бұрын

@@yuan-jia nope

@yuan-jia 8 күн бұрын

@@JoeElementz Ah really, that’s sad! Thanks for the information

@wwessex 14 күн бұрын

That is an awesome bag it includes.

@JoeElementz 13 күн бұрын

I love it!

@Director_S 15 күн бұрын

Are you using the monitor thru SDI ?

@JoeElementz 15 күн бұрын

Yes

@nwcmotionpicture1816 19 күн бұрын

Is this the FXLION Nano 98WH or 50WH?

@JoeElementz 19 күн бұрын

@@nwcmotionpicture1816 it’s the 98W

@뱁샙-z9d 21 күн бұрын

틸타 케이지랑 모파지 nd 필터랑 간섭이 있는지?

@krishandanushka1931 24 күн бұрын

Hi Joe, Thanks for your review. I need to get one advise out from this video. I am planning to buy X2D 100c and I am new to hassselblad, I am more interest of wedding and fashion photography. as your point of view , does this camera fit to my interest ? specially for wedding & event shoots...Do I need to keep additional camera kit ? could you please guide me.. Since I have limited budget and it is hard to afford two camera kits....please comment. Thank you ....

@JoeElementz 23 күн бұрын

@@krishandanushka1931 it is perfect for those needs in terms of colour reproduction. However, the system is very slow unless you are willing to slowdown and are able to control shoot you will miss shots especially with live fashoin shoot

@krishandanushka1931 23 күн бұрын

@@JoeElementz Hi Joe, thanks for sharing your first hand experience.. I just watched your wedding photoshoot from X2D...Good Luck...

@jessemccallum7481 28 күн бұрын

Love the V-Mount adapter. Perfect for my underslung handheld style making the camera longer :)

@wwessex 29 күн бұрын

The Full Metal Jacket cage by XLCS looks awesome

@wwessex 29 күн бұрын

How long does that V Mount battery last you on the Pyxis?

@joshuaripplingerfilms4498 Ай бұрын

nice Solution! Will try this fix for setup as well! Just wondering, with the TILTA Adapter my PYXIS shuts off when the voltage reaches 14.4 volt, although the V Mount is somewhere around 40-50% charge... Any solutions for that?

@JoeElementz Ай бұрын

@@joshuaripplingerfilms4498 I get the same issue however I will be trying a lemon cable to see the difference

@BisikletaDiary Ай бұрын

what firmware?

@StringerBell2002 Ай бұрын

Great workaround!!! Hopefully Tilta sees this @tilta

@gerlinpierre-louis3928 Ай бұрын

Hey bro, could you break down how you took apart the adapter please really love your rig

@JoeElementz Ай бұрын

@@gerlinpierre-louis3928 I will make a video for that 👍🏽

@ArSXBrO 4 күн бұрын

@@JoeElementz amazing solution, i ordered all the parts ! waiting for your vid

@MfstudioDe Ай бұрын

thanks for your video! Could you tell me which of the supported media of blackmagic pyxis is working with that Tilta SSD adapter? Seems like only the Sandisk Extrem Pro Portable SSD V2 fits…? :/

@JoeElementz Ай бұрын

@@MfstudioDe nope I am currently using the Samsung T7 but before then I tried several others but you could only just safely record 1080 upto 4k DCI. Anything higher than that you will get dropped frames

@MfstudioDe Ай бұрын

@@JoeElementz thanks for the quick reply! they don't even recommend the t7 officially, only the shielded version. mhmm :/ all so unsafe as it seems…

@AdamDumaguin Күн бұрын

the regular t7 does not work with off speed recording with the pyxis. only the t7 shield checks everything out pyxis6k owner here as well

@MfstudioDe Күн бұрын

@@AdamDumaguin but t7 shielded doesn‘t fit in that cage right?

@AdamDumaguin Күн бұрын

@@MfstudioDe really? i was about to ask this. the t7 shield does not fit?

@MrASesay Ай бұрын

Thanks Bruce!!!

@FilmAndStar Ай бұрын

Two letters and a digit... FX3

@JoeElementz Ай бұрын

lol three letter RAW 😜

@FilmAndStar Ай бұрын

@@JoeElementz lol Love !

@wwessex Ай бұрын

What is the purple bit you have on front?

@JoeElementz Ай бұрын

@@wwessex pl adapter

@wwessex Ай бұрын

I like Small Rig as they don’t use proprietary bits.

@JoeElementz Ай бұрын

@@wwessex smallrig doesn’t have a cage for the Pyxis

@jpsheets Ай бұрын

Great breakdown of your set up, would love to seen some close ups of how you’ve wired between the motors, lidar and handle.

@VidHeadz Ай бұрын

The original Sony FX6 Tilta V-Mount Plate already comes with a 2 Pin Lemo to plug into the camera. Edit: I'm sorry this is in accurate. I forgot that I changed the original connector 12V Barrel 2.1 to the Lemo connector I got off Amazon. Please excuse my error here. I made this mod back in April when we were first waiting for the camera to release.

@JacobEttinger Ай бұрын

Technically Shape has a V mount plate for the Pyxis that mounts to the top of a cage and can swing up or down by a button push. Essentially same spacing you created here. I'd just rather go with something like Shapes than this due to the exposed wire and connector. Like the other comments below, there is an issue potentially that may damage the motherboard.

@bmefilms6879 Ай бұрын

love the look of your camera!

@earnieboy54 Ай бұрын

Pass. The plates are created for each camera for a reason and that plate has already given a LOT of fx6 users main board nightmares. Just use the plate included and designed for the Pyxis kit! Power may be okay now but it’s going to wear on the camera over time and the expiration date is too random to risk. Could be fine for a year or 2 or fine for a day or 2. Too risky to be considered a solution

@motionpikczer Ай бұрын

Good advice from an FX6 owner. There have been a lot of cases of motherboards being burned by this adapter recently. My three tips: 1. Always have a small PBU battery inside the camera. If the power is cut off (vlock discharge), there will be no short circuit. Only the accessories will turn off. 2. I definitely recommend the MINI Vlock adapter from Tilta. Much more secure battery mount, 2xdtap, 2pin lemo + PD USB (you can directly power e.g. DJI SDR) 3. Several times, e.g. when panning on a tripod or easyrig, it was easier to grab the vlock batteries from the back - this adapter very easily catches the slack and for a micro second the camera loses power. Be very careful about this or change to a mini vlock adapter.

@bmefilms6879 Ай бұрын

your rig looks better and better every time I see it. I might just go with this over the red komodo X!

@JoeElementz Ай бұрын

@@bmefilms6879 full frame

@WatCharles Ай бұрын

You could 3d print a custom-sized replacement casing until a better solution is on the market

@JoeElementz Ай бұрын

@@WatCharles unfortunately I don’t have access to that

@Shaiquille Ай бұрын

Are you running into any power draw issues with this fix?

@JoeElementz Ай бұрын

@@Shaiquille nope not at all

@williamanuel Ай бұрын

Try this: SmallRig V-Lock Battery Plate with 15mm LWS Base Kit for Small Cinema Cameras

@nwcmotionpicture1816 Ай бұрын

I haven’t purchased my pyxis Im waiting to see whats coming out within the next month. But your solution is very practical & I love it Im going to go with your recommendation.

@cralwar Ай бұрын

Nice! Very ingenious modification

@JENKINS3155 Ай бұрын

Brother what God is about to do in your life will blow your mind In Jesus Christ Name I speak it so keep doing what you are doing I don’t know you but I know what I heard watch Jesus Christ in these next coming days and months watch in Jesus Christ Name Amen.

@clermontmondy3447 Ай бұрын

monitor mount link or name please 🙏🏾

@davidp158 Ай бұрын

Nice review of this cage system. I generally like Tilta products, and this one looks pretty nice. I see that it can be configured to allow the PYXIS for vertical shooting. It's not something I intend to do, but the side screen becomes a top screen for people shooting vertical content. Q: Is the bottom plate that connects to the LWS baseplate Manfrotto compatible, or is it proprietary to the LWS baseplate?

@JoeElementz Ай бұрын

@@davidp158 it is manfrotto compatible

@bensmart3569 Ай бұрын

Sorry i hope someone can help me answer this dum question. Whats the deffrence between the PL and EF. Whats the pro and cons of choosing onve over the other. Thanks

@JoeElementz Ай бұрын

@@bensmart3569 Positive Locking mount (PL) provides secure mounting system for that kind of lenses as they are usually heavy and are built for cinema application. This means that 1. They will have focus gear ⚙️ and 2. A set of the same lens shares the same colour representation. Example of the lens has a slight tint of colour all the set will be the same. This helps with post production. Overall PL lenses more intentionally designed compared to Not PL like EF where each lens can have a different look. Just in a nut shell 🐚

@bensmart3569 Ай бұрын

@JoeElementz thank you. I was just confused on which of the pysix I should get. As they are deferent in price.

@unclejezza Ай бұрын

I agree with your assessment of the battery adapter sticking out too much. Seems like Tilta took a shortcut and just re-used the FX6 moulds for this camera. Lazy from them and a real shame!

@davidp158 Ай бұрын

Tilta is very responsive to customer feedback, so it would be worth mentioning this to them. It wouldn't surprise me that they come out with a better solution for this. Maybe they were trying to get this to market and re-used parts from the FX6. I like using the battery as a point on contact, so I'm not sure this would bother me. However, I do agree it could be somewhat shorter. Otherwise, it looks like a really nice cage. Many of the other cages I've seen are overkill, expensive and probably a lot heavier.

@StMediaNL Ай бұрын

I created a similar mount myself and printed it. Works great. I also tested some larger and shorter distances, I think they're quite spot on distance wise so you can still comfortably access all cables/card slots. I really like it this way.

@earnieboy54 Ай бұрын

They also made it that way because at the end of the day, the cf express and the IO connections need space and v mounts aren’t made with equal sizes. It wasn’t lazy, it was them working around the Pyxis slightly janky design.

@AltCine Ай бұрын

Nice overview bro, Tilta do make nice cages.

@JoeElementz Ай бұрын

Yes they do

@GeorgeWakai4628 Ай бұрын

Tilta has a better option for the Pyxis 6K.

@ENJOY97 Ай бұрын

Which SSD fit in the Side Plate? THANKS

@StMediaNL Ай бұрын

TIlta website has the sizes. It's generic so a lot of drives will fit.

@ENJOY97 Ай бұрын

@StMediaNL yes I saw that but the question is does the Samsung T9 rugged fit or just the regular T7.... the Samsung T9 is too thick I think. Have you tried any of them?

@StMediaNL Ай бұрын

@ t9 rugged: 60mm x 88mm x14mm Cage ssd holder max dim: max 60 and max 12 height. So no. The rugged t9 is 2mm too thick. Width of 60 works. So if you sand the thickness of the drive down then it will fit. However remove the rubber/silicone sleeve around it and you get a much sleeker drive that will probably fit. If not make your own custom case for it. This was a 30 sec Google my friend…

@Deraeking Ай бұрын

Buy the top handle for the Sony fx6.

@JoeElementz Ай бұрын

@@Deraeking which one, Any links to share?

@alexgrant311 Ай бұрын

I bought this cage yesterday. I'm excited for it to come in

@JoeElementz Ай бұрын

@@alexgrant311 you won’t regret it

@nckingsley_ 27 күн бұрын

Please help me with the direct link to the store.

@alexgrant311 27 күн бұрын

@nckingsley_ it's on the tilta website

@jordanfrankel-securityexpe8666 Ай бұрын

NO image stabilization! Very disappointing.

@newvoodoofilms Ай бұрын

Totally agree and when you factor in how much better the R3 is with still photos it isn’t even a competition

@2kstyles 2 ай бұрын

Awesome video! I've been trying to gauge the size as in some peoples video it looks massive but i have an iPhone 15 pro max so this helped! thanks brother