Great video, had a couple questions I have a 08 caliber srt and the pcm is not vin matched, if I find someone to vin match the pcm to the shell and unplug the skim before installation, and use hp tuners to do the skim disable. California smog purposes would call that tampered pcm right even though stock parameters just skim disable?

I need on for a 05 hemi do u guys have the stuff for that

Is thjs just for “test stand” setup? Or can I run the factory tune with that quick hemi harness?

Would this work for 392 hemi?

Awesome videos.

This harness works for 8 gear transmission, we’re can I purchase this Harness

I got a 2014 Ram 1500 5.7L. I just bought the 6.4L Exhaust Manifolds for the swap. Do you think I'll need those Franges?

What rear end do you have? I currently have an 8 1/4 and im thinking i need to upgrade to a 9 1/4. Any suggestions would be greatly appreciated!

With a 2012 charger rt as donor car.Could i wire in the ignition switch and use the key fob from the car in my 68 charger??

Will this work on 6.1 hemi from 06

Will this work on an 06 6.1 hemi

have you thought about using a 12volt a/c compressor on some of these swaps no belts mount anywhere

How do you prime a 6.4 L gas engine?

How do you prime a 6.4 L gas engine?

Blake, are the 11-14 Factory compressors non-variable? Is that why you mention those to work with after market AC?

Very good knowledge for that don't that. Thanks

Will this work with the holley alternator relocate bracket?

I have the twin to that Challenger. I have owned it since 79. Mine has a highly modified 340 and a built 727 with 4:10 8 3/4 rear end. I drive is most every week. Your Challenger is one sweet ride.

Does the 8HP70 also have a reverse switch internal?

i bought a 2009 ram 2500HD 4wd i got the chassis and parts of the cab engine bad. did not have mds on this model. i am planning on putting a 1950 cab on the chassis. i have all wiring and computer but no keys do have steering column. i have a 2014 6.4 and a 2018 6.4 and several older 5.7 engines question is can i send you the computer and you delete skim and what ever else needs deleting hopefully the 6.4 will run on the 5.7 tune in the 2009 computer and once up and running have a tune put in. problem i have no idea if the computer is good or bad. can you help me if i sent you the computer do you have a way to connect to something and make sure its ok and then delete the skim.

👍👍👍👍

I have a question. Can I put the rotating assembly from a 07 Hemi into a 09 Hemi block? My 07 ram sucked in water and threw a rod through the block and my fuse box got soaked with water and there is no power to the key or windows. Would putting in one of your fuse box be a better option than using a factor one?

Great video Blake, now I can hook up my lights and the back up camera . Thanks

Do you guys make a wiring harness for the 5.7 hemi .that would work for put a5.7 hemi in a 01 jeep grand Cherokee wj

Skim delete requires a full flash and the mvpi2 is usb connected for flashing. Not sure where you got your information but it’s wrong. Bluetooth is only used for logging.

Great info... thanks guys

Where the link

The fact that you had trouble, actually added to the video. (CAN BUS ENABLE). But what if I just wanted to delete skim on a car, not swapping it?

The 2008 Hemi Ram and the 2007 ram Hemi. Is there any difference and will the 2008 work in the 2007? Is there any wiring difference or are both years the same?

I’m interested. A bit confused on the 5 small connector wires though. Is there a PDF file that’s downloadable to see how it’s set up with more detail? Or do we have to order it for the instructions??

Do you have to re-flash the computer?

2 questions, can you update the VIN from another Jeep? Say i have to replace my PCM, can Hp Tuners update the VIN on the replacement Module? Next question, if it will update/change VIN do you have to but more than 2 credits? How about a video on building that workbench harness? Thanks for great videos.

Make sure you get that cam out on the MDS motors

What do i need i i want to swap for my 1970 cuda what do i need. Like engine with transmission and harnesses. And do i need special engine brackets like the LS swap

What is the lower radiator hose part number?

Dude you ran out of oil

Where do I order ?

I have a 2015 with brown and white connectors. Am i able to flash hp tuner file?

Good idea, we see a lot of the same questions on the hemi sites.

got a 85 ramcharger 4x4(318).....and a rusted out 2010 ram 1500 hemi.....wish yall would do a 4x4

Awesome, thanks for the video! Very good information

Bro, you coming to Texas?

thanks! these video does help people out

One more thing I was curious about. Is can you try write entire instead of calibration. I noticed a lot of other security delete that’s what I saw was done.

Also i dont see you guys having a 2012 guick run harness. Does the 2015 work?

Let me ask a question. Say we still have the MDS still in the engine. With your wiring harness could we get say a diablo tuner and permanently disable the mds off the computer so we dont have to do a cam swap?

Succky part is that the wireless tire pressure sensor and the door locks and alarm.. they dont work without the WCM.

Genius !!!

Just bought a New Mexico interceptor and had no idea how to put it in neutral so thank you

Seems my comment is missing. Or am I not seeing the conversation