New Gen Hemi Standalone Harness - DIYHEMI QuickRun Preview

[@cavaleiro95]

None of your links are working?

[@justswapit-jsi-8911]

With their help and info I made my own harness. Thank you

[@kirbywinters1291]

I’m glad y’all got it figured out now can I get something for my 2009 car hemi

[@matts6409]

Love then harness simplicity! I am interested in doing the swap, but what is needed for 545RFE wiring to make it work with the swap? I haven't found a video yet that demonstrates outside of the truck as a visual aid. Can you make a short for us DIYers?

[@SUBLIMEparts]

Our QuickRun 05-08 truck harness supports the 545rfe since those came stock on them.

[@williamjarbeau3601]

Sweet a saved and following..

[@MrMurph111]

@@SUBLIMEparts …..ok, we have a 2014 truck 5.7 hemi with the 545rfe, uncut engine/trans harness with pcm, pedal, ignition switch/key…what would we need from you to make it work? It’s going in a 1988 D150 short bed. Thx.

[@emiliorosales8745]

What instrument is the 24-pin connector actually controlling?

[@TheHortond]

I need a bypass for limp mode on a Jeep Grand Cherokee.

[@topenddean]

Such a great kit, you guys rock!

[@JohnGarcia-dx4gg]

Hell yeah, i found my guy. Im working on a 60 Oldsmobile Dynamic 88. I definetly need that ECU.

[@cavaleiro95]

Show the ignition switch setup

[@MeleeTV]

Is thjs just for “test stand” setup? Or can I run the factory tune with that quick hemi harness?

[@ryangilley3212]

Is your website no longer up? All i can access is the forum.

[@matthewwiese3184]

I need on for a 05 hemi do u guys have the stuff for that

[@claybeard1157]

love it, keep working hard, it is appreciated

[@SUBLIMEparts]

Thank you! Will do! We appreciate you.

[@SRT_DRE]

I’m interested. A bit confused on the 5 small connector wires though. Is there a PDF file that’s downloadable to see how it’s set up with more detail? Or do we have to order it for the instructions??

[@markmissildine961]

I'm hoping you see this but it appears your email and phone numbers are not linked on your website I would love to call and ask about the quick hemi truck harness

[@awdperformanceboy]

Where the link

[@improvisewitme]

Dang this is crazy!. Looks like a lot of work. Will this run with my tremec TKX transmission?

[@SUBLIMEparts]

It was a fair amount of work to get it ironed out. But we got it 😁 We love pushing hard to bring better solutions to the community. Seeing you all enjoy these swaps keeps us going! We want it to be simple for everyone! This will run along with a tkx trans, no problem.

[@voodoo8931]

Can I start the new Gen engine with an old NGC ECM?

[@ROBERTBRADLEY500]

OK HOW DO I CONTACT YOU GUYS. HOW MUCH IS THE HARNESS

[@Joseramirez650]

Hi I’m where do you guys got fuses box with the computer plug

[@nickhenderson9499]

I am swapping a V6 challenger to a392 hemi and I was wondering if you could help me get one of your quick harnesses

[@MongrelsGarage]

Great Stuff guys, I know where my 2015+ PCM will go in the future!

[@williamjarbeau3601]

Hello I have a 07 5.7 hemi out of a truck need your harness to work in 66 Plymouth

[@antcarter4133]

What if car already wired for a nag 1 can I just tie in both harnesses or I have to go with sound German

[@Count_Munch]

i have a 6.4 hemi where do i get the quick hemi harness and ecu from

[@Speedylam]

Works with stock transmission??

[@Count_Munch]

is there a body connector adapter for a 2011 car to 2013 engine

[@TavaresHoward-j5n]

Can you delete the vats off a factory computer for a whole harnes swap

[@KevinGibson-os7yx]

I have a pre VVT 2007 5.7 hemi crate engine and stand alone harness and computer and was wondering what I do with the original computer in my 1991 Dodge D-150 that I plan on swapping?

[@SUBLIMEparts]

You can pull it out and toss the D-150 ECM or sell it. You will not need it.

[@jorgesaavedra2081]

You guys have a harness that connects from a 2014 5.7 hemi to a 2002 4.7 ram 1500?

[@melvinmassey9131]

I need one those wire harness

[@SUBLIMEparts]

Check us out at Sublimepsrts.com

[@scottscipione9547]

is it necessary to use a hydrolic clutch ? can i use a manual peddle set up? Z bar location the same?

[@aspman97]

What happened with this? Did it ever get made? Link above goes to a forum, is there a store front somewhere?

[@sleeperjunky3629]

Does this work with the MDS engines or does the MDS need to be locked out?

[@SUBLIMEparts]

It works on mds engines, but the mds feature is turned off in the tune.

[@cliffhadesty8311]

Hay guys try to check out some of you links but there not working I’d like to Hemi swap my fury

[@JeepmansOffroad]

Where are these harness to buy??? the Link shows a missing page

[@SUBLIMEparts]

We are now sublimeparts.com

[@jesusaguilar645]

Hey so im swapping a 6.4 srt8 in my 2010 ram 2500 5.7 and i need it tuned but theres no tuning shop and i dont know if a srt8 box tuner will work if i plug it in to my truck so i was wondering what harness to buy and what ecu cause i cant just swapp the ecu because the wiring harnes is a 4 connector to the ecu un like the cars wich is 2 connector

[@hunteralgie746]

Wow super interested! Do you guys still make these!

[@SUBLIMEparts]

Sure do! Sublimeparts.com

[@SUBLIMEparts]

Absolutely! sublimeparts.com

[@cruzitomartinez7509]

@DIYHEMI u guys make anything to make a 2018 motor plug n play for an o6 rt?

[@F.Dig.]

Thank you for your help

[@QuinnP.]

Great work, the best swap kit I have seen yet. Is your kit compatible with a 2013 5.7l hemi matched up with a 545RFE 4x4,truck ECM?

[@boostinturbskee5385]

Nvm I see this is for the car hemi. Ok. Just wanna be sure. This will work for a 2018 truck 5.7 going into a 88 w100?

[@SUBLIMEparts]

No, the truck hemi is wired differently. We will have a full stand alone solution for those in the future

[@cardinalbaycustoms2702]

Have you done a harness for Twin drive by cable Throttle bodys on holley high ram 05 hemi harness... Can I wire the 05 truck harness to just read the TPS on the Tbody...

[@SUBLIMEparts]

We have not done that yet, but would love to hear your results if you try it!

[@cardinalbaycustoms2702]

@DIYHEMI looks like if I use the 4.7 harness with pcm I can run the drive by cable Tbody and attach a second as the follower , then Lots of Tuning .

[@markmissildine961]

I want do put a hemi in my truck what all would I need can I use the OEM wiring and ecu

[@SUBLIMEparts]

use the OEM engine harness, then our QuickRun harness and have us calibrate your ECU

[@antonioV96]

Would this be compatible with a Tremec TR6060? I imagine yes but I’m not too sure. That’s what I plan on running, I just need to know how to option out before I purchase on the website

[@johnfalgoust5372]

How much

[@jamesdobie576]

Do you do one to run a cable throttle?

[@SUBLIMEparts]

Not at this time

[@danielbuckner2167]

So how do you keep the valve guides from dropping?

[@SUBLIMEparts]

You are thinking 03-08 engines. The simple answer is keeping the engines cool. Make sure you have ample cooling capacity to prevent thermal expansion of the cylinder head aluminum. The guide material has a different coefficient of thermal expansion than the aluminum metallurgy of the cylinder head casting. This is how the press in valve guides can come unseated.

[@jjmonty8090]

This is gonna rock isn’t it….

[@SUBLIMEparts]

brother you know it! Let's do this

[@OnlyBuiltOnce]

I have a 2017 6.4L Srt full motor ecu etc. So all i would need is your quick harness and everything should run or do i need to send my ecu in to get other stuff disabled in the ecu itself ?

[@SUBLIMEparts]

Correct, just buy our QuickRun harness and then send in your ECU to be recalibrated so that it will work in standalone configuration.

[@shaquillecoleman71]

Where do I order ?

[@dushanfernando-go2jv]

Do you guys have harness for jeep JL

[@Not.Denver]

Does your ecm need to be recalibrated to run this harness or can you use one straight off a car?

[@SUBLIMEparts]

It needs to be recalibrated

[@clintwoods2937]

Does your harness CAN BUS

[@adonvonpanzern]

Is this my excuse to hemi swap my Late 3g Dak?

[@RS-lt2ue]

What about the NAG1? How is that going to work? Original TCM with TCM 2800... Standalone? What's the plan?

[@SUBLIMEparts]

NAG1 and 8speed transmissions would require a stand alone transmission controller from Sound German Automotive.

[@elcompafonzi357]

Were can i buy that harness?

[@bkemotorsports5199]

How much for a 2011 harness?

[@allenwood3763]

Hey I have a 2006 300C 5.7 hemi. Complete running car looking to swap it to a 71 Duster can you hook me up on what I need on wiring kinda would like to retain ac if possible

[@SUBLIMEparts]

We have a harness for you on our website. 05-08 car QuickRun will get you going

[@F.Dig.]

Can anybody answer me a question I installed this in my 1965 Dodge Coronet wired it up the same way I get fuel I’m not getting spark. Any suggestions?

[@SUBLIMEparts]

Did you have your ECM calibrated? Or are you using a stock ECM?

[@F.Dig.]

I finally got it started. I thought I had voltage on accessory when it was cranking but it didn’t. I ran a jumper from 12 V to the accessory and it starts so I have to find where it keeps 12 V when I’m cranking it at accessory and when it’s cranking

[@SUBLIMEparts]

Awesome, glad you have it sorted out!

[@mattyruppel1654]

Hi, I have 2012 jeep wrangler that I want to put a hemi. My donor truck is a 2006 ram 1500 5.7 with 545rfe. Do you have a harness that will work for my project?

[@SUBLIMEparts]

We have a harness that will work for thst engine but it won’t work well with your Jeep. You keep uses a newer canbus format than the older ram

[@mattyruppel1654]

@@SUBLIMEparts thanks gor responding

[@blueduster74]

Game changer.

[@coyoteserranoband]

Yay

[@fitogonzalez701]

Will this help with running any of the 8hp transmissions or the newer Nag 1 transmissions?

[@SUBLIMEparts]

This just runs the engine. The transmission needs its own controller

[@Javy1021]

@@SUBLIMEparts can you make a wire harness kit to run the 5.7 whit the nag1 on a 2014 jeep jk ?

[@pjshooter6]

​@@Javy1021 jeep speed shop has the kit for what your looking to do.

[@markmissildine961]

Do you have 2004 harness

[@winstonemerson2439]

So is this kit for putting a hemi in an older car or truck?

[@SUBLIMEparts]

That is correct

[@musclecargarage8882]

Nice work

[@SUBLIMEparts]

Thanks brother!

[@RIDESBYDESIGNTV]

When can that be bought?

[@SUBLIMEparts]

They are shipping out starting this month. Check out the link in the description! Thanks

[@Thomzombie303]

Hi Blake, the more i watch your video's the more im convinced i need to do a hemi swap. That said, i got a line up on a 2012 dodge charger (wrecked sheriff RT prusit charger, unsure of miles) that runs and drives. Think i will trailer it back to my shop and start the tear down, rob anything i can for my 71 duster A-body. UNLESS you all want to take on a new A-body "DIY", :)

[@SUBLIMEparts]

We wish we could man. We’ve got so many projects lined up and not enough time unfortunately. Get it brother and let us know along the way how it goes.

[@6.2_2ss]

were to get harness

[@SUBLIMEparts]

sublimeparts.com

[@Automaticrepairco]

Where can I buy? Links don't work

[@SUBLIMEparts]

Sublimeparts.com

[@98Pete]

Work on 6.4 also?

[@bobb7792]

Costs???

[@YouTubecommunityCollege]

Can you please do a video removing and then putting back on the engine harness 😭

[@SUBLIMEparts]

any specific year and engine type?

[@blueduster74]

Ram 1500 work?

[@DiegoRodriguez-fv9go]

Srt8 ?

[@SUBLIMEparts]

Yes, we support SRT8

[@markmissildine961]

Do I use the OEM ecu with this

[@SUBLIMEparts]

Yes you do

[@Paisaxiv]

Will it work for a hellcat engine?

[@SUBLIMEparts]

Yes, it will run hellcat engine. However the hellcat engine needs extra features to be complete. It needs a relayed circuit for interchiller pump at minimum. We are working on a hellcat specific harness and will launch it soon.

[@xavinavas11]

Hola, necesito ayuda con mi hemi, soy de españa, podeis ayudarme? Como me pongo en contacto contigo? Gracias

[@RTLEE1]

Wow !!

[@zuriiiii77]

Is that a 4th gen hemi

[@SUBLIMEparts]

Yes it is

[@zuriiiii77]

@@SUBLIMEparts how hard is it to install in a 3rd gen ram if it’s possible

[@Mrmatt-pt3xm]

So much cheaper of an option.nice man

[@SUBLIMEparts]

You are very welcome!

[@DiegoRodriguez-fv9go]

Info

[@mohammadrezafayazi-z9f]

Hi, I sent you a message for the Dodge Durango 4x4 Hemi wiring for purchase

[@jjmonty8090]

Sounds mean

[@SUBLIMEparts]

The video doesn't do it justice. Its LOUD! LOL

[@victorlinares5753]

Do you guys carry oem engine wiring harness?

[@SUBLIMEparts]

Sorry, we do not.

[@SRT.GRIZZ63]

So I'm swapping my 2006 5.7 Hemi to a 6.1 Hemi pretty much same year with the wiring harness you are talking about I can pull a motor out of another car pop it into one I have and this wiring harness will wire up and I'll have no problems starting my my car I wish I had y'all's phone number I'd rather talk to you on the phone about it gets too detailed here anyway I'm going to swap out my motor and I don't want to replace the entire wiring harness for the whole car and if this is some kind of adapter kit where I can plug and play does it do you also make a wiring harness for the transmission too anyway if you can text me your phone number

[@gofastcrx]

where can i buy this kit?

[@SUBLIMEparts]

sublimeparts.com