xac's DIY

Пікірлер

@MikeRyan-q2e Күн бұрын

Fit din po yan sa Honda City 2010 model? Thanks po

@xacsdiy733 Күн бұрын

1.5 GE ay from 2009-2012 ng both Jazz and City. I guess it will fit bro.

@dunstonmunson8314 12 күн бұрын

Does it matter if the two lines are not horizontal? Because I noticed on the one that's on my car now the two lines are at an angle and they are not horizontal. Do you think this could be what's causing the leak? That it's not sitting right because the lines are not horizontal. I'm wondering if the cap needs to be replaced or if I just need to realign it.

@xacsdiy733 12 күн бұрын

Hi, I think you are right. I am just following what is in the original position but I am thinking right now, I didn't see any orientation that needs to follow in the inside part of the plug or cap. The main reason of the leak is the o-ring only. In your case, if the o-ring is worn out, it will still leak even if you adjust it.

@dunstonmunson8314 15 күн бұрын

Can I use engine degreaser for the cleaning or does it have to be carb cleaner?

@xacsdiy733 15 күн бұрын

D greaser will do. It is just happened that carb cleaner is available and it is fast drying too.

@maxgiacomo 22 күн бұрын

What product do you use to clean?

@maxgiacomo 22 күн бұрын

Could it be WD40 ?

@GreatGrandmasterWang Ай бұрын

I used this in my Subaru when I replaced the radiator. It’s been more than a year and it had no issues

@WellingtonNZdojo Ай бұрын

For the airconditionong push button, is it 1 or 2 bulbs that are being replaced, or is one a dummy?

@xacsdiy733 Ай бұрын

Hi, the button has 2 bulbs. 1 is indicator to show the location of the AC butron when the key is ON. The 2nd bulb lits up when you press it to activate the compressor.

@carlocabbuag389 Ай бұрын

San nyo po nabili atf filter?

@xacsdiy733 Ай бұрын

s.lazada.com.ph/s.MaEmv

@SonHoang-cq2qg 2 ай бұрын

where we buy those led for honda fit 2008 ? thanks

@xacsdiy733 Ай бұрын

Hi, I just bought it from an online store. Just look for T5 LED bulb.

@Andy-1234 2 ай бұрын

Great job filming. You did a good job showing the inside of dash and how connectors work. The bulbs don’t come out easy and you showed how to do it. Thank you! All the best.

@MacCanites 3 ай бұрын

hello, nilinis mo ba ung mismong part kung saan isinasaksak yung PCV valve? Ano ung pinanglinis mo dun?

@xacsdiy733 3 ай бұрын

Hindi ko na nalinis bro yung part ng crankcase kung saan nakalagay yung pcv. Nakaharang kasi yung starter. Dami pa tatanggalin. Kung me chance ka, i suggest malinis mo na din.

@MacCanites 3 ай бұрын

@@xacsdiy733 THank you, ginawa ko inisprayan ko ng carb cleaner yung towel, tapos dahan dahan ko nalng pinunasan yung loob.

@MSB7857 3 ай бұрын

T4 T5 bulb available hai market mai, 10/- 20/- rupees mai, lekin t3 nahi mil raha hai

@warrenjosephlateojr.5554 6 ай бұрын

Do you have facebook page?

@xacsdiy733 6 ай бұрын

Hi, please try Channel xac at FB.

@bill1828 6 ай бұрын

If you make future videos, please skip adding music. It's annoying and distracting. We are hear to learn about servicing a car, not listen to music. Thanks.

@DrNoth 21 сағат бұрын

Mute it if you don't like it.

@MommyBhengskie 7 ай бұрын

Wow

@CartorecaFC 7 ай бұрын

Talvez eu não consiga fazer nem com as duas mãos kkkkk

@zaifkhann 7 ай бұрын

Is there any RPM fluctuations with or without OCC? As i installed an OCC in my honda fit but the can shrink a little bit as it was plastic can DIY. Now I'm going to make an aluminium can. Any beat advice before installing?

@xacsdiy733 7 ай бұрын

You really should need to use aluminum can. Plastic can or even plastic hose will not work. Vacuum from intake manifold is so strong and will surely collapse plastic material.

@macorex100 8 ай бұрын

Hello bro , i just notice a similar leak on your torque converter and shifter oil seal at the bottom.. checking if when you'll be addressing and replace those seals as well? Could it still be driven thousands of kms? How could you tell if those leaks are critical and needs immediate seal replacement?

@xacsdiy733 8 ай бұрын

Hi bro. The leak that we see at bottom of my engine and tranny are all came from the camshaft sensor at the neutral safety switch. The oil seal replacement of the neutral safety switch is in this video kzbin.info/www/bejne/eGqXqn6fmK6apdk I need a good under wash after. 😊 Those leaks can still be driven as long as we are constantly refilling the engine oil for the camshaft leak or the ATF for the neutral safety switch leak and I am not happy doing that every month in my cases. 😂 Appreciate your message bro.

@liondragondanceMY 5 ай бұрын

hi bro, do i need to empty the engine oil first before change the camshaft sensor seal?🙏

@xacsdiy733 5 ай бұрын

Hello bro. No need. There will be no leak also when you removed the sensor. Thanks bro.

@ferchlymontemayor9933 9 ай бұрын

ty po sa video.. saan ba tayo pwde mabili yung T3 bulb po boss..

@xacsdiy733 9 ай бұрын

s.lazada.com.ph/s.9NAqH Thanks sa message bro.

@PerfMeister 9 ай бұрын

Try it on diesel engine

@macorex100 10 ай бұрын

what spray did you use on cleaning inhibitor? also, where did you order the seal bro?

@xacsdiy733 10 ай бұрын

Hi bro, you can use carb cleaner or brake cleaner. Here is the link for the oil seal... shp.ee/g4vsxhf

@thtb368 10 ай бұрын

Thank you so much for detailed instructions 🙏🏻

@karlpineda4544 11 ай бұрын

shawtawt nman dyan kuys 😎👍🏼

@xacsdiy733 11 ай бұрын

Hindi pede shout out pag wala talkis. 😂

@reinhardtgatchalian7344 11 ай бұрын

❤

@reinhardtgatchalian7344 11 ай бұрын

Nice video. Informative, keep it coming bro

@xacsdiy733 11 ай бұрын

Thanks so much!

@macorex100 11 ай бұрын

Bro, nalamig pa AC mo before ka magpalit? maingay lang sadja kaya mo pinalitan clutch assy? saken kasi maingay pag nage-enggage ang plate pero malamig pa

@xacsdiy733 11 ай бұрын

Hindi na consistent bro dahil dumudulas na yung clutch. Minsan didikit minsan magiingay na lang dahil di na makadikit.

@MatteoTodd Жыл бұрын

Great video. Ty

@johnpaulbacani Жыл бұрын

Sabe nila yung Oil Catch Cans daw may sala don sa mga talsik galing sa dip stick at pcv

@xacsdiy733 9 ай бұрын

Me video content ako bro comparing with or without OCC. Thanks sa comment mo. Na trigger ng content ko na ito. 😊

@zardiw Жыл бұрын

Nice vid.........Thanks!!..............Z

@subhamgorai3262 Жыл бұрын

hlw my new petrol car only 2500km driven, but my coolant colour changed from blue colour to colourless greyish colour. i replaced it , but after 5000km the colour again changed. what is the problem.pls reply 😊

@xacsdiy733 Жыл бұрын

Hi, i dont want to suspect your engine have head gasket issue since you still have new car. Normal Coolant replacement should be around 200K km and every 2500km is not normal. Coolant when turn into milky grayish color usually have issues in head gasket and I suggest to bring it to your dealership.

@dayanandawari7991 Жыл бұрын

From where you got said bulb?

@xacsdiy733 Жыл бұрын

Hi, i just got that from a local online shop.

@macorex100 Жыл бұрын

May naramadaman ka sa engine bro bago ka magpalit pcv valve? Anong mileage ka pala nagpalit bro?

@xacsdiy733 Жыл бұрын

Hi bro, wala naman kakaiba. Bale sabog lang ang langis. Mga around 200K mileage nung nabasag pcv valve.

@macorex100 Жыл бұрын

Anong mileage ka bro nagpalit waterpump?

@xacsdiy733 Жыл бұрын

Mga around 200K din nung pinalitan ko water pump ko bro. Dapat sana pati mga hoses kaso wala pa ako mabilihan ng isang set. Parang 9 or 11 pcs yata yun. Preventive maintenance sana. Mahirao maputukan ng hose then overheat, malaki gastos.

@rassiuzluine2943 Жыл бұрын

The new T3 led that u installed have a bigger bulb than the stock one, how to fit in that New T3 on that AC button socket ? Since its cannot fit in Sorry my bad english

@xacsdiy733 Жыл бұрын

Hi, the T3 led is made of plastic material. You may use sand paper until it reduced and fit in the button.

@rassiuzluine2943 Жыл бұрын

Thanks mate....

@yuliyadi3452 Жыл бұрын

om saya coba buka..pinggirannya malah sobek..gimana tuh

@paolife16 Жыл бұрын

Chief after 2 years kamusta performance ng blower? Based sa mga natanungan ko mas mababa daw rpm ng replacement comoared sa japan surplus na blower?

@xacsdiy733 Жыл бұрын

So far bro, ok pa din yung blower fan ko.

@garbagepicker Жыл бұрын

thank you so much! the 6:29 part of the video made my life much easier!

@caseytey189 Жыл бұрын

Hi, what is the actual backlight and AC led color?

@xacsdiy733 Жыл бұрын

Blue or Iced Blue in some online store.

@caseytey189 Жыл бұрын

@@xacsdiy733 the default colour are not green?

@xacsdiy733 Жыл бұрын

Mine is blue.

@ArczAngel Жыл бұрын

boss ano ang purpose ng isang bulb? bat hindi umandar

@xacsdiy733 Жыл бұрын

Hi bro, parang yung isang bulb ay para pailwain lang yung letters na A/C pag naka on ang headlight. Yung isa naman, indicator na naka On ang aircon. Iilaw yun kahit hindi naka ON ang headlight basta naka ON ang aircon.

@ArczAngel Жыл бұрын

Ayun pala purpose non, d mo lng na try sa video mo boss? Btw boss, d pala aandar ang bulb sa swith pag d talga pinaandar ang makina ang buksan ang AC? Tsaka meron pala polarituly yang mga bulb boss? Pag ng baliktad wala naman pong masusunog?

@ArczAngel Жыл бұрын

@@xacsdiy733 dapat nka on ang headlight bos?

@jamnabor Жыл бұрын

Sir pasok din po ba yan sa Honda City 2010 1.5 AT po?

@xacsdiy733 Жыл бұрын

Hi bro. Ang alam ko parehas lang. Kasi pag sa Jazz, 2009 to 2012 ang GE. Parehas lang sa city.

@migellebron748 Жыл бұрын

sir update kapa ng mga vlog mo parehas tau kotse tnx

@jeromepacana3928 Жыл бұрын

Sir honda fit gd idsi engine pasok din kaya yan na rear cam cap?

@xacsdiy733 Жыл бұрын

Bro, hindi ko kabisado ang engine eh. Pero try ko iresearch.

@xacsdiy733 Жыл бұрын

Paki check ito bro kung pasok sa year model ng fit mo yung Jazz sa description... shp.ee/bqgriju

@xacsdiy733 Жыл бұрын

Or ito s.lazada.com.ph/s.h1Fls

@OkiDingo Жыл бұрын

Why are you using a universal joint?

@xacsdiy733 Жыл бұрын

Hi, if you mean the hose, it actually not universal. Hose is designed for jazz ge8.

@OkiDingo Жыл бұрын

@@xacsdiy733a universal joint is the swivel joint on your ratchet. It was painful watching you use it, lol

@xacsdiy733 Жыл бұрын

Oh yeah, i'm trying to use it as an extension and later found out that I can loosen or tighten the bolts without extension with just 1 hand and camera on the other . Lol. Sorry if you felt that pain. I am not professional and just DIYr only. Thanks anyway bro.

@zaoldyeck11217 Жыл бұрын

kumusta naman ngayon ang blower sir?

@xacsdiy733 Жыл бұрын

Ok pa rin bro. Minsan swerte swerte talaga sa after market parts. Buti ok quality nitong nabili ko.

@zaoldyeck11217 Жыл бұрын

@@xacsdiy733 thanks sir, kakabili ko lang din, ikakabit pa lang, sana okay din siya 🙏

@ricanhavoc2828 Жыл бұрын

Thank you

@Tumurbo Жыл бұрын

Sir pasok din kaya sa 1.5 gd vtec yung nasa link?

@xacsdiy733 Жыл бұрын

Ito pa bro, paki check year model ng GD mo kung pasok. Di ko kasi kabisado ang GD. shp.ee/humniuq

@fouroverseven7799 Жыл бұрын

Thanks for the video. Very helpful.

@madizm100 2 жыл бұрын

Nadurog yung pcv ng jazz ko nahulog yung ibang plastic sa loob, ok lng po kaya yun?

@xacsdiy733 2 жыл бұрын

Sa akin meron din nahulog na piraso ng plastic at nasa loob pa din. Nakakita na ko ng loob ng pcv area and parang compartment lang yun bro at hindi papasok sa engine.

@valterlucio1989 2 жыл бұрын

Só faltou áudio

@johnritzrosell885 2 жыл бұрын

Purpose niyan Lods?

@xacsdiy733 2 жыл бұрын

Cover lang yan pinalitan ko dahil me tagas.

@biggotji 2 жыл бұрын

What size is the ratchet wrench suitable for this job (1/4, 3/8)?

@xacsdiy733 2 жыл бұрын

3/8 or 1/2 will do.

Ең жақсы KZbin

Пікірлер