@@rollsizer5623 I am looking forward to using it. The camber on my 6.5 CM must be very liberal at the base. I have played with a number of full length sizing dies and both a Forester and Area 419 press. And of course a variety of approaches to the shell holder. Bottom line for me is trying to size the base in this manner is not going to work. It isn’t consistent and varies based on how many times the brass has been fired. I was going to find a base sizing die for my press but I had my doubts on that as well. This approach just makes sense based on what I have experienced.
@gtc196110 күн бұрын
Are you selling this in the United States? I can't seem to find it.
@rollsizer562310 күн бұрын
@gtc1961 the rollsizer.com website has a major warehouse in Houston TX. If you order online it will ship from there automatically.
@Evintos12 күн бұрын
Is it possible to hook up a portable drill to the Universal like you could with the Manual?
@rollsizer562312 күн бұрын
Its possible but you would have to stop it exactly at the right removal /replacement position.
@SamsodenMaruhomАй бұрын
How to order
@rollsizer5623Ай бұрын
@@SamsodenMaruhom look up rollsizer.com
@Youknowthetruthdontyou2 ай бұрын
Well it is time for a fact check on the rollsizer. I cannot comment on the universal. I weighed all my options of which model. Sent an email to Keith the owner and he responded immediately. I settled on the dc drive model. And let me say, this unit is amazing. I have a hornady case feeder hooked to it. Today, I ran 5800 9mm cases. Not one hiccup. forget that handle stuff, get a motor. You are going to use it more than you think. This will last a lifetime..Buy once,cry once.
@rollsizer5623Ай бұрын
The universal was designed for those in precision / LR shooting with low volumes. these guys run custom dies, calibres etc and look for non standard results (usually 0.004" under their chamber) and the Universal is the only machine on the market that can offer the adjustable precision. its not recommended for the volume USPSA / IPSC groups....hell, I do 8,000 in 1 go with my own commercial.....
@Irregular-SAMK2 ай бұрын
This machine booths decappes and roll sizes?
@rollsizer56232 ай бұрын
Look up rollsizer.com. We make rollsizers and decappers.
@potatopark63293 ай бұрын
Can the universal rollsizer cater 9mm brass? Or should i opt for the manual roll sizer for 9mm?
@rollsizer56233 ай бұрын
Yes the universal will do 9mm no problems. The universal was designed for the adjustable / precision function and can duplicate the other rollsizers but can only be manually operated. Small volumes, no big deal. If you have ,000's of cases, look at one of the others.
@potatopark63293 ай бұрын
@@rollsizer5623 i load 500 to a thousand at a time. Will the universal do or the manual for 9mm?
@rollsizer56233 ай бұрын
The manual rollsizer (as different from the universal)can be hand crank or drill operation, this means much much faster on the calibres available.
@potatopark63293 ай бұрын
@@rollsizer5623 im gonna be getting a 40caliber to use in standard division soon. Should i go for manual and get 9mm and 40 conversion disc or just go for universal?
@markkornytchuk78475 ай бұрын
completetly uneccessary
@rollsizer56235 ай бұрын
if you dont see the need then it is unnecessary for you and i respect that, but we have had a number of top eld and specialist calibre shooters place orders because they see an advantage.
@YouknowthetruthdontyouАй бұрын
@@markkornytchuk7847 How can you say it is not nesessary? People have fought this battle of 9mm range brass bulge since glocks came on the scene. If it does not affect you simply means you do not shoot range brass, do not shoot very often or you simply know something that everyone else on this planet does not know. While I have your ear, and you being all knowing, let us in on how they built this pyramids.
@jesusisalive32276 ай бұрын
Nice! Do you offer just the head without the gearbox?
@rollsizer56236 ай бұрын
Sorry, no.
@tymz-r-achangin7 ай бұрын
Rollsizer? Come on, you can come up with a better name than that, cant you? I cant even see anything that rolls on it
@rollsizer56237 ай бұрын
Lol. If you don't understand it ask.....it sizes a part of the case the sizing dies do not reach. Yes it does work very well.
@tymz-r-achangin7 ай бұрын
@@rollsizer5623 Yawn yawn. Your non-sensible response is why I and may others often dont bother with asking. You still didnt ANSWER why its called a ROLL sizer
@Tex-cf2zl10 ай бұрын
Hi, two questions: After brass are processed by Rollsizer, still need a resizing DIE? On the other side, when reloading 9mm few cartidges don't fit in the cartidge comprobator. The solution I use is use the LEE Factory Crimp DIE in those cartidges. After using this DIE, the rounds fits perfectly in the cartidge comprobator and in my gun chamber. Seems that Rollsizer do to the same that LEE Factory crimp DIE, but before start reloading process... so why is rollsizer a better solution? Note that I'm writting from Spain, where reloading is not as normal as in EEUU and where we don't have access to a lot of reload stuff as well as we are very limited in the number of primers/powder we can buy. I'm reloading 1200-1500 rounds per month. Kind regards.
@ReloadingMoreAD1966 Жыл бұрын
Went live Yesterday, just because things were running so well with the days job. Thought it would be nice for most to see this Rollsizer in action. I am madly crazy in love with this tool. Here is the link: kzbin.infocdQODNfrZ8Q "Let me know if you prefer I take the link out of your comment and will immediately do so. no issues. "
@0Kahless0 Жыл бұрын
This might be the ideal device to resize the body of an existing cartridge to form a wildcat, which otherwise has no real parent casing. Like forming .458 SOCOM from any WSM case. This might not be an option as long as Starline produces .458 SOCOM, but once production ceased this could be the solution.
@caleblong3184 Жыл бұрын
I know this might get buried but what case feeder tube did you use from the Dillion to the rollsizer?
@keithschmidt4089 Жыл бұрын
Is there any power upgrade add on for the future, without purchasing a different machine?
@rollsizer5623 Жыл бұрын
No, sorry. Different internals to the gearboxes. We looked at this option years ago but it was expensive, VERY expensive.
@jakephelps1530 Жыл бұрын
Please do some more videos with a high quality camera.
@gordonblank6845 Жыл бұрын
There very much still around.
@nickdanhillpadre8255 Жыл бұрын
Is there in the philippines?
@philipheelham30612 жыл бұрын
Double alpha plate in the case feeder will fix the speed problem
@Timi_Secoban2 жыл бұрын
I got one few month ago, but still have problems with some sort of cases. Most of them are Sellier Bellot Nontox . Even after rollsizing, those cases are oversized in diameter. I had to made a new bigger inside roll (+,20 mm) and now it work. Just an idea for those who have the same issues like I did.
@chgofirefighter2 жыл бұрын
Wow, it will take forever doing it manually...
@rollsizer56232 жыл бұрын
Add a batttery powered drill. You can get 2500+ cases per hour. We supply all the parts to connect to a drill.
@chgofirefighter2 жыл бұрын
@@rollsizer5623 I was told that the internal bearings were not made to handle a battery-powered drill. Plus who wants to sit there holding a drill forever? Would love to purchase an automated one but sadly, they are not affordable. I guess one used would be nice once I find one... But I won't be paying $2200 for a commercial one that's for sure...
@rollsizer56232 жыл бұрын
@@chgofirefighter who by? LOL, We have seen 3 returned under warranty in 5 years and guys who have burned out 10+ drills on one machine and are bow banned from their local hardware store....
@rollsizer56232 жыл бұрын
And we have sold over 2,000 manual rollsizers to date
@chgofirefighter2 жыл бұрын
@@rollsizer5623 lol, banned from their local hardware stores? Interesting! The issue with the manual option is having to sit there to roll size thousands of cases in my case I have 20k cases of 9mm to process and that's just for personal use until I get another 30k or so more cases, I load 50k rounds a year average and I'm just tired of finding some cases not pass case gauge.
@williambotha58642 жыл бұрын
Awesome Kevin, just became one of your customers - your machines are flawless and your service impeccable!
@boltactoinbarney2 жыл бұрын
Just loaded 1k 9 mm the other day dillon 750. Every one of them fit in my 9mm case gauge just fine. Just carbide dies. Don't waste your money. But if you enjoy the hobby. Spend it.
@chuckcullup13843 жыл бұрын
This product is not on the Rollsizer website yet for purchase, when can we expect to see pricing and Availability?
@rollsizer56233 жыл бұрын
No. Been trying to get some rebuilding on the website. It's been slow. If you want one I can quote directly. Pm me to [email protected] with the address, contact number and calibres you want to process
@DONTTREADONME00114 күн бұрын
What’s shipping time to the US?
@noeljohndacara91663 жыл бұрын
so how much it will cost?
@rollsizer56233 жыл бұрын
John. Pricing is dependent upon which machine and what conversions you want. You can price this up on the Rollsizer.com website
@killer26003 жыл бұрын
Seriously, $1063 to add a motor to a $1162 machine? Shooting sports puts the most absurd prices on the simplest of machines.
@rollsizer56233 жыл бұрын
The DC rollsizer is $1200USD delivered with a pistol conversion, the Manual rollsizer (probably the closest to a Casepro) is $699USD delivered, i think we have offerred an excellent product at a fair price.
@johnjosephponce51713 жыл бұрын
Hi good day do you have one on stock
@rollsizer56233 жыл бұрын
No. We are out of stock but will be allowing backorders on the website shortly. Very limited stock. VERY. We have 28 commercials landing in late April (Subject to LA port congestion) and when wenload these up I expect to sell out in a few days.
@johnjosephponce51713 жыл бұрын
Im hoping to buy the manual one with a 9mm dye
@rollsizer56233 жыл бұрын
@@johnjosephponce5171 I have a bunch more gearboxes being airfreighted in now. It will be 2-3 weeks still but there seems to be a LOT of interest. I will load updates on the website.
@johnjosephponce51713 жыл бұрын
Hope fully you could spare one for me . And possibly ship it to the Philippines
@rollsizer56233 жыл бұрын
None in stock at the moment. It will be late May before we can help
@stevev6983 жыл бұрын
I assume this company is now out of business. Their website doesn't work and they can not be reached by phone.
@saintsfan79913 жыл бұрын
Website appears to be working.
@snowinak3 жыл бұрын
Still have to full length size, so whats the point of this? Full length sizing will do everything this machine does
@rollsizer56233 жыл бұрын
Actually no. Coat a clean, fired case in a permanent marker and full length size. There is a gap at the base which cannot be reached. The rollsizers get this area back to factory. They also get the base concentric to the rim AND square up the lower section to the base. They really do work.
@Jan-yj5mo3 жыл бұрын
Hi, I’ve got a question regarding my 223 conversion kit. 1st after rollsizing a 223 case it comes out with a bell(above the rim). After full length sizing die the bell is still there, is that normal/on purpose? 2nd the 223 conversion plate doesn’t fit on the base shaft correctly, the hole seems to be to tight. Once installed it is almost impossible to remove it again. Is it supposed to be like that? The 9mm plate fits easily. Regards from Germany
@rollsizer56233 жыл бұрын
Yes. The small depression is normal. The process does 3 discrete things. 1. Case becomes concentric (hence the dimples/ depression just above the extractor groove) 2. The case is now circular and sized back to factory standard. 3. The case becomes square to the base. Not as much of a problem with rifle but the problem does occur. As far as the plate goes. If you use a small jewelers file down either side of the shaft keyway it is probably a small burr. Rotating the disc clockwise and anticlockwise will help in the removal. Possibly the disc has a small burr on the inside of the disc. Probably around the place where the key slot was cut.
@Jan-yj5mo3 жыл бұрын
@@rollsizer5623 Thanks for your quick response! I just worked the keyhole with sandpaper and indeed, there was a small burr. Hardly to see with the naked eye. Now it works pretty well. Thanks :)
@rollsizer56233 жыл бұрын
@@Jan-yj5mo glad to hear. Keep me in the loop
@Milby20289394bc3 жыл бұрын
Why not raise the edges and center of your contraption and make it to where it fully resizes the case? Eliminate the need for resizing die in a press.
@rollsizer56233 жыл бұрын
Chris, because the case behaves like an "open can", the cases just get bent out of shape. That's why for the upper 2/3td of the case you need the fill length sizing dies.
@Trad61663 жыл бұрын
Will this uniform the rim of 223 cases as well?
@Trad61663 жыл бұрын
Hmm. Now that you say it, thinking about it. I believe that is the exact problem I am running into with a pretty big batch of wolf 223 brass that I have.
@chuckcullup13843 жыл бұрын
I bought my Compact Electric DC sizer last year. I Now roll size all the calibers That I Reload. I’m currently patiently awaiting the 44 magnum conversion. This is one of the best pieces of reloading equipment I have ever purchased.
@jbarson52003 жыл бұрын
I have the commercial rollsizer I have to take 3 of the screws out so my case feeder can keep up, but when I take out the 3 the rollsizer won't kick out the case cause the moving arm that hit the screws doesent quite move far enough. But with all 6 screws in itll run flawless any fix to this? I was thinking about welding something that sticks out a little further on the screws
@rollsizer56233 жыл бұрын
Ok. The levers are designed so they only move the case out far enough to allow the NEXT case to drop down. This is deliberate. The lever should extend 30mm or so from the case pusher. Please email me a photo of your set-up to [email protected].
@rollsizer56233 жыл бұрын
Thats a common problem.....
@allip6732 жыл бұрын
Does it actually create a problem to have the rollsizer outrun the case feeder? If not, it seems to me there's no benefit in moving the bottleneck further down in the system. Slowing down the rollsizer just decreases total throughput.
@dericpetronius903 жыл бұрын
Do you ship to Brazil?
@rollsizer56233 жыл бұрын
Yes and 47 other countries. Which one are you after?
@rollsizer56233 жыл бұрын
Jib. Yes you need to supply a case feeder.
@jbarson52003 жыл бұрын
Ok cool I have a mark 7 on the way it should be able to keep up if I take 3 pins out
@jbarson52003 жыл бұрын
So i would have to already have a case feeder?
@rollsizer56233 жыл бұрын
Charles. The rollsizers remove the bulge at the base of the case where the full length sizing dies do not reach. The base is sized back to a factory dimension and case gauging becomes a waste of time.
@charleshetrick31523 жыл бұрын
I’ve just ordered up a Mark7 and roll sizing popes on my radar. where does the bulge go? Does it ultimately contribute to more case neck trimming? If a person uses a “small base die” is there any considerations to made?
@charleshetrick31523 жыл бұрын
I use a reclaimed vibrator from an old baby swing to deliberately add *dither* to the powder drop for more consistency in powder throw.
@HanstheTraffer3 жыл бұрын
I reload 22lr. The factories use a machine to crimp and cannelure 22lr cartridges that is VERY similar to this machine. The crimping machine has a blade and a knurler on it but other than that it is exactly the same design. I have learned a bit of machining in order to make the dies and tools for reloading 22lr. I use a collet type crimper now...a modified Lee Collet crimper. Been trying to make myself a crimper similar to the case pro 1000 but lack the skills. Sigh.
@rollsizer56233 жыл бұрын
The latest round count was over 20,000,000 cases before the base needed replacing, this was basically run non stop for 3 years as a commercial processor.
@rferreira35614 жыл бұрын
It seems very easy, nor does it require strength, greetings Rafael, straight from Brazil
@keimolantio4 жыл бұрын
Do you ship to Europe?
@rollsizer56234 жыл бұрын
Yes, absolutely, Rollsizer.com is currently sold and shipped to 38 countries to date.
@FabrícioAeromodelismo5 жыл бұрын
where buy ?
@rollsizer56234 жыл бұрын
Look up rollsizer.com. you can order online.
@txmac19665 жыл бұрын
Next time try holding your phone sideways that way your video will fill the whole screen.
@KindredGh0st5 жыл бұрын
Where can I buy this in the united states?
@rcann11405 жыл бұрын
Actually it does make a difference if the cases feed upside down. When it is upside down you are NOT base sizing the case, ,which is the whole point of rolling the case. Any bulge will still be on the brass, which could cause the final finished round to not be able to seat properly in the chamber. Which could cause a blow out of the base of the case directing the gasses straight down the magazine well. So pay attention during rolling and grab any upside down cases as they are coming off the machine.
@CRA6775 жыл бұрын
Does this require an adapter to connect to a drill?