Rollsizer video processing 9mm cases at 6,000+ cases per hour

The rollsizer from Whitehead Specialty Engineering is now in full production. Processing rates well in excess of 6,000 cases per hour. multiple calibre options including 308Win and 223 / 5.56 Nato. for all details refer to rollsizer.com or direct email to [e-mail]

[@southernkayaker]

I would just like to add that Mr. Whitehead has been very quick to respond to my questions, and answers thoroughly any and all questions. I am studying and weighing the benefits both short and longer term of this rollsizer for my use, and he has been nothing but helpful so far, and anything BUT a "pushy salesman". He is an engineer first, and it shows through his conduct. Two thumbs UP!

[@tangotwo4743]

Great video. Great machine. Thanks for posting

[@rollsizer5623]

This is this is actually processing at 6,800 per hour. The machine can handle it but for reliability of feeding I have kept it to 6,100. The production machines use special bearings and has a L10 bearing life of approximately 85,000 hours, this is better than a lot of high end mining equipment.

[@rcann1140]

Actually it does make a difference if the cases feed upside down. When it is upside down you are NOT base sizing the case, ,which is the whole point of rolling the case. Any bulge will still be on the brass, which could cause the final finished round to not be able to seat properly in the chamber. Which could cause a blow out of the base of the case directing the gasses straight down the magazine well. So pay attention during rolling and grab any upside down cases as they are coming off the machine.

[@Timi_Secoban]

I got one few month ago, but still have problems with some sort of cases. Most of them are Sellier Bellot Nontox . Even after rollsizing, those cases are oversized in diameter.

[@bobotte7532]

One thing to mention. The 9mm is a tapered case and it cannot go in upside down. What you have will work for the straight wall, not for the taper case.

[@jbarson5200]

So i would have to already have a case feeder?

[@jakephelps1530]

Please do some more videos with a high quality camera.

[@rollsizer5623]

Jib.

[@jeferson26]

How can I get this? Could you send to Brasil?! The electric motor and reducer I alread have. The matrix is what a need! Is it possible?

[@snowinak]

Still have to full length size, so whats the point of this? Full length sizing will do everything this machine does

[@txmac1966]

Next time try holding your phone sideways that way your video will fill the whole screen.

[@johnjosephponce5171]

Hi good day do you have one on stock