I used to watch this when I was younger Now I own one:)
@tranquach64283 ай бұрын
You are sooooo lucky
@HeIsTheBluesCat2 жыл бұрын
Kekeke, ke...
@BioGoji-zm5ph3 жыл бұрын
It's interesting to see how the 93 era Victory Gundam kits, at least the 1/144 scale ones, had a primitive inner frame predating the Real Grade kits by nearly a decade. And, interestingly, the more primitive 93 era inner frames seem to hold up to usage far better than the early Real Grade ones. Although, since the 93 era inner frames are much simpler in design and construction, they are less prone to wearing down by default, I suppose.
@swfbutler3 жыл бұрын
Who makes that wonderful X-Wing? Is it also Revell?
This guy seemed to cameo in the penultimate episode of G Gundam so i looked to see if he had an HG kit and he does. There's even new kits on the way apparently. Too bad there's no wiki that lists all the HGs from this show...
@sx61844 жыл бұрын
Don't buy pirated versions! fuckin Recasters!
@jonnylyden4 жыл бұрын
who needs talking when the audio and presentation are awesome
@Evilpass4 жыл бұрын
My god that music its too loud
@sirrugglesby21905 жыл бұрын
I made the Millennium Falcon kit and lit it up, great panel lining BTW
@xscarecrowxx5 жыл бұрын
Lol I remember that show
@punishedjake57155 жыл бұрын
Im a total neeb i just order this and two other gundam the other were RX-78-2 and zaku II my quation is do i need glue or can this be done with none should i buy glue
@Mark-uq9km5 жыл бұрын
God this annoying
@xujie09875 жыл бұрын
Thank you for the video! I learned a lot. What did you put in the Isograph pen after the ink? I found it quite hard to erase the ink with alcohol.
@xujie09875 жыл бұрын
Thank you for the video! I learned a lot. What did you put in the Isograph pen after the ink? I found it quite hard to erase the ink with alcohol.
@limjiawei74466 жыл бұрын
Really hope ZZ Gundam will receive same treatment as them.
@weezwee3806 жыл бұрын
nice job. how you separate black orange paint ??
@shinji67656 жыл бұрын
Could you please talk about what you are doing and why instead of only just pointing.
@mrAfarts6 жыл бұрын
*this man predicted the STD style of the enterprise*
@kenho69386 жыл бұрын
I need some help, it would seem that my end result is always slanted any ideas why? Is it because I used too much putty??
@DLP-Coasters6 жыл бұрын
i'm listening to this with my HA-NC80 lel
@Hakuru156 жыл бұрын
just got this kit came to my door and built it, i really love it!!!
@Joni.Richy.6 жыл бұрын
I really enjoyed this video, I especially liked the comparison between other models at the end :D
@kenkingsflyingmachines23827 жыл бұрын
Is that music supposed to be playing?
@bismarck57957 жыл бұрын
how long is the model ?
@TheAxelson7 жыл бұрын
Nice job. I think if you had used a bit darker flesh tone, the face sculpt would have looked so much better.
@wc74847 жыл бұрын
how did you make that picture with the color scheme?
@lhasarus7 жыл бұрын
Back then I had an old version of Photoshop. I guess today I would do it with Gimp (free image editing software).
@wc74847 жыл бұрын
hey lhasarus how did you make the model of the gundam? the one with the computer designed color scheme?
@charlesembry81337 жыл бұрын
good size for making Vader fleet. these would be to scale to some super star destroyer models and being cheap you could easily afford many of them
@junkerjunk7 жыл бұрын
Did we really have to watch all the unpacking? And the music makes it seem like a cheap porn movie.
@mirouskemirous98457 жыл бұрын
....škoda času a materiálu. Samozrejme každý máme svoje "sny", ale toto je tak do 12 rokov veku.....prepáčte.
@jelaienfinue8 жыл бұрын
I wish it was still on E2046... I want that.
@feigong88 жыл бұрын
H
@feigong88 жыл бұрын
Cqx ZZccqqc A
@OFFICIALRubikscude8 жыл бұрын
Where'd you get the turn display?
@MaddawgJAG8 жыл бұрын
Typical Revell .......shit
@charlesembry81337 жыл бұрын
Jim Goebel I think it is cool, would be to scale to some super star destroyed models, you could make Vader fleet with the executor and several of these surrounding it.
@stahlhort8 жыл бұрын
FedEx und UPS sind Abzocker! Die nehmen - wie du sagst - die 10€ Servicegebühr und übernehmen ungefragt die Verzollung. Ist Betrug, Abzocke und generell Beschiss. Aber man kann sich nicht dagegen wehren, da man bei deren Anwälten eine Klage verlieren würde, obwohl deren Handeln illegal ist.
@lefishe83038 жыл бұрын
do they still sell this? please give me the link
@oogabooga95467 жыл бұрын
Try at Amazon.com
@joshuaemmanuelbelisario83269 жыл бұрын
enamel paint for handpainting?
@lhasarus9 жыл бұрын
+Joshua Emmanuel Belisario Nope. Acryllics. Back then I used Revell Aqua Color. By now I shifted to Vallejo Acryllics. Thanks for the comment!
@zwerver61369 жыл бұрын
will inkt also do the job just like washing?
@lhasarus9 жыл бұрын
+Michel Krijger Hey. I am not 100% sure what you mean with inkt. But if you mean applying highly thinned paint to the lines and removing it with thinner after it is dried. Yes. If you are interested, I can give you a link to tutorials.
@jaycobs31249 жыл бұрын
Very good video review Since Headphones like home speakers are subject to the listerner this is a great review no talking about " There Great" or something useless since you can't hear them. Great music which the post had the name of the GROUP..Reminds me of a YELLO type of vibe...Keep up the great tube views...D J JAY man....
@donaldzuramp44049 жыл бұрын
hi, im new and wanna build gundam, should i start off with hg or rg? and where do u buy those paints? Geat video btw and now im inspired to build:D
@lhasarus9 жыл бұрын
+Igneos Kai Sorry for the late reply. I would start of with HG - RG have many tiny parts that might be a bit frustrating a t the beginning. On paints: that really depends on where you live and what is availible. I would recommend Acryllics. In Germany I used Revell Aqua Colors and now in Japan Vallejo Colors and Mr. Hobby Acryllics.
@donaldzuramp44049 жыл бұрын
oh, thanks for ur response! i've already started building:D i've already built 00 raiser rg. iyeah, the small parts are really frustrating but i cant argue with the result. im still thinking twice about painting cuz i might mess up. ur videos are really helpful, i'll try it in the future:)
@ЕрмекАлшынов9 жыл бұрын
привет
@williamvanparysiii79869 жыл бұрын
Very informative, thanks bro'...
@nicogowindra69539 жыл бұрын
hi! thank you for posting this Video. it is so inspiring :) May i know what kind of liquid did you use to strip the paint? Thanks a lot :)
@julioenricotagle9 жыл бұрын
+nico gowindra i was gonna ask the same question. haha. and for the gun, what kind of paint did you use for the white and grey (lacquer or enamel)
@lhasarus9 жыл бұрын
+Julio Enrico Tagle +nico gowindra Sorry for the late reply. It is ethanol aka denatured alcohol aka methylated spirit. Cheers!
@julioenricotagle9 жыл бұрын
+Lhasarus thanks!
@MaydayAlish9 жыл бұрын
Fuckin song disturbing
@221b9 жыл бұрын
I just put one of these together today. Kind of annoying that the most difficult part to assemble by far is the inside of the cockpit, which is barely visible once the thing's all together.
@jiroapolonio29239 жыл бұрын
I am really having hard time on the eyes, I dont want the sticker