Whats your cfm

The cooler needs to be between the compressor and the tank. It cools the air and allows the water to fall out and never enters the tank. By that time it enters the tank and cools down it’s harder to get the water out. You have to cool it much colder.

Amazing! Well done.

What about a junk yard condenser

Hi, really enjoyed your video! Would it be possible to get a list of links to all the parts you discussed in this video?

Much volume drop? 11, 180 degree turns.

I bought this touch probe, thanks to this video. Thank you! The wireless V.8 probe is fantastic!

another idea. Maybe try mounting a big brush the entire length of the gantry it brushs over the collet holders cleaning them off as it travels back to pick up another tool. And if they are long enough it will protect them from debris while you are cutting.

Can you include a link to where you are getting theeiso20 ER16 tool holders for $20. I would really like to try them.

Just a thought maybe you should install some stops infront of each side of the linear beaings on your tool changer so you can adjust the stoping position and it you could correct it from being out of alignment with the gantry.

Bro stop gate keeping the macro. Don’t be shy and share it

Good work man!

just want to say im so glad i found this clip thanks for sharing 🤙🏽 fixd my problem .

Subscribed.

Nice setup. I'd add a fan to the radiator and a T between the radiator and the air dryer with a valve in order to minimize the work load on the air dryer so that you can empty water before it gets to the dryer. Other than that it's a really nice looking setup!

Well apparently you have been feeding way too slow then :)

Que tarjeta ocupas para este proyecto ... ? Que core manejas ? GRBL HAL, MACH3, LinuxCnc , otros ? Que Software CAM te da el uso correcto de estos accesorios ?

Wow! Can I please get your feeds and speeds for the 2.5mm single flute?

How do you do this

This radiator has a serious problem. Have you figured it out yet?

The video was well made and the setup looks very clean. My only complaint is that you did not list the parts and numbers and where you found them here in the comments, that would've been nice so I don't have to search all over for them.

Hello Nikita, do you know about cheaper one of those iso20 probe holders? I have only found several from some brandname companies for over $100.

Just saved my life, thx

I just purched iso20 tool holder, .001mm, 40,000rpm, delivered to Canada, under $20CDN, in 10 days, ER20 version. Very high quality 😊

2:06 haa, had to laugh, since I had the exact same problem, changed the USB-cable for an obvious better one and the issue was solved :D

Hi how are you ? From where can I buy this ?

Thank you. I've used paper clips to remove these before and this time I kept the tool around that ships with the products but it's too short and I can never remember whether the clip should get pushed up or down. This zip-tie hack was the easiest way I've ever used to remove these access points from the ceiling. Really appreciate this video.

Thanks for posting the video appreciate your time.

Hi, very nice Omio. Thank´s for uploading all this videos, they are a great inspiration. I also have an Omio and want to add an ATC spindle, maybe you can answer me two questions. Can the original steppers handle the extra spindle weight (I have seen you have upgraded to servos)? Would you choose the JGL80-1,5kw again or would you go with the JGL80-2,2kw or maybe even the JGL100-3,2kw?

Big hug from Perú. I would really love a video step by step on the how to ATC a normal CNC. That would the first video of its kind I guess. Haven't found any yet.

Great job. What Spindle brand did u use. I just got my first cnc machine and i need to upgrade my spindle to atc

How much air does the compressor really need to provide for the ATC? I've read 90 PSI at a run rate of 5 CFM. In the videos I am watching, it only seems to need the 90 PSI during a tool change event. Seems like the 5 CFM requirement is overkill...

That’s just awesome. Love the tap to turn the water off when I leave town.

🤦‍♂️ you make the thread after you cut the part off held by tape??? Doesn’t make sense.

Good but you didn’t say what’s the max operating pressure for this system.

Perfect work Nikita, would you mind to share M6 macro for inspiration? Thanks Juraj

Software you use??

What are those digital read out gauges on your tubes? They're so sick 🤢 I gotta havem on my CNC machine

Your electronics look good too man I'm low-key jealous lol 😆 I'm in the process of my making my CNC machine and I have my linear rails coming I'm going with MGN12H on the y axis and HGH25 rails on the X Carriage and Z Axis

@NikitasLab hey man I was wondering if you would be able to make a BOM for the components your ATC air assist system is made up of the names of the parts with pictures maybe? I've never really known what make up those systems and would like to make one myself. Any insight in how the whole system is made would be great 👍 Thanks

for the moment i have this spindle that usually comes with a home cnc machine. have these small collars that i have to change manually. Do i need to get a totally new spindle to have this took holder shuck or can i rebuild the one i have?

Oval holes, looks like Nema 24 with 23 hole compatibility, doesn't help the larger frame size though, 23 and 24 have the same size central circular boss by default. Faulty advertising for sure.

Can you show how to install 😊

you need a better microphone

Did anyone ask if this radiator is in line between the compressor and the tank?

I would argue that the cooler placement should be between the air compressor pump and storage tank. You want to store dry air. I'd also install a fan on the aftercooler. It could very wired so that the fan only runs when the compressor runs.

Every one of those loops is a condensation trap, I bet it gurgles and restricts flow like crazy.

Do you not need a fan behind the cooler?

only 200 like? idiots...best cnc dude!