RU afraid to demo your catcher repaired job by starting your mower on KZbin?? I don't have confidence in this repair job! There's "NEVER enough time to do things RIGHT but always enough time to do it AGAIN!!!

Why not place the patch on the "inside" of the catcher material; that's the side with air-pressure and grass-weight pressing on it?? Outside patches have a greater tendency to get blown or knocked off. Also, patches are best when they have rounded edges, not corners <= corners small size have the tendency of lifting-off?

Can u please help. When we put the address in by google it doesnt take us to the log in for us to put the details in

Thanks for putting this video up. It doesn't help me, as Camec chose to put a steel wire strap on the inside that is tightened with a loose nut/bolt arrangement that precludes just pulling it off. Bloody annoying. But your video has obviously helped others, so thanks for doing it.

Thank you for these clearing instructions, it really helped :)

For me it doesnt show up on available networks

Testing the kill sith both ways should read differently. One way the 2.6700 ohms and the other way shouild read "open."

didnt work for me unfortunately

coud not even log into the IP useless the page can not be reached also does not recognise my router

have a briggs sprint 40 lx from 2000 and this is the first time it's not sparked, now know the coil is ok and it's probably the 24 year old plug, thanks Roy.

great tip , thank you

EXELENTE,el video me fue muy útil, ese tipo de Arrancador no es tan común, Muchas gracias por el video

I have a old briggs and stratton mines coming up as 12.66 not sure if im doing it right

Thank you a repeater is not what I thought it was, you made it clear.

🐐

At 4:38 you should have said "infinite resistance" No resistance is continuity which would read zero.

Very good 👍

Thanks Mate

I do like that little tip of the Emery paper wrapped round the feeler gauge, very good 👍

Great video thanks. Helped me out. But where can I find the gasket and metal plate? I don't have those on mine.

Great video ...I've just got my mower working again thanks to your tutorial. however, I think I'll need to replace the gaskets in the Carb the next time around the 'o' ring was flattened and I'm sure the gasket was missing from the carb end that meets the main engine. can you suggest where I can get the carb kit for mine. It's a Mountfield SP534 model 51cm cut. Cheers

When cleaning our Indesit washing machine, the inner tension spring ring came loose. We were about to buy a new machine until we came across your video. Competent instructions, easy and successful to follow, many thanks from Austria! You, Sir, are a hero to us!

These also fail when they warm up and leak internally due to insulation failure. No test for that.

you are lucky you get a fuel tap built into the tank. Over here it is just a fuel tank , no fuel tap.

Help me mine was i accidentally upload a picture on software upload after that it never show the wifi ssid and stop blinking at i can't reset any more

Cant get it working using LAN...sucks to be me lol

Sorry for last comment,mine had already been pulled apart & 2nd spring was missing,have a great day Roy.😊

You said the spring was in wrong hole,why did you put it back the same as it was?You made it sound like there's 2 springs when there is only one.

My Briggs coil is showing 6.2 is it still good?

Hi Roy, I have atco lawn mower, Very old battery turns it over and over but it doesn't fire up? When I star it by pulling the cord it starts straight away, Please suggest, Much appreciated.

Ok so I plugged it in via ethernet cable all the lights came on but still no better? I tried the ip address but that doesn’t seem to work either? Any ideas

MY coil is reading 2.6- 2.7 is that okay?

Thank you

Hi Roy ,I think I should point out that the 3rd coil you checked as open circuit has the metal cased.Resistive plug connector which plugs into the coil lead .It's value is 5k ohm. If this item is open circuit or the connection is corroded to the lead.Then the test will show no reading on the coil.It can be misleading.I got caught out and purchased a new coil for nothing.Cleaned the connection after finding out it can be separated. Then tested ok.

8:40pm 1/5/24

I spotted an essential piece missing as you put the blade on and thought at the time “this fellas missed a part” 😂 I’ve just inherited one of these myself, used it today for the first time. The only issue I have is the fact that the blade spins permanently whilst the engine is running instead of only spinning when engaged via the handle like a lot of my previous mowers. Not sure if this is standard on this mower or if it’s something I need to take a look at. Great video mate 👍🏼

Well done sir . Thank you.

Hard to find that cable. Any ideas? Great vid btw.

is it always admin password

Never seen your videos before but love your way of thinking with the wire brush drill. I am a one man band fixing garden machinery part time and a customer brought a old 1988 Mountfield in with the same Quantum mk1 35 engine and i had no idea until now about the pull start system either. Am in North yorkshire if you ever want to meet up and see my little workshop. You are just like me with your logic. Remind me of my self buddy love it.

Very useful thanks, I was struggling & no there videos showed me how to get the cover off so I could replace the fraying pull cord.

So my coil is off a 17.5hp Briggs and I lost fire yesterday as I was trying to start it up, it kept flooding. Not hitting at all. Thought it was possibly a switch or sparkplug but I tried a spark tester and it wasn't jumping on it. My meter showed 1. On both tests. So my coil is dead?

How to find website to find his firmware update

You didn't post the adjustments to the carburetor. Can you explain what you did?

Hey sir thank you for sharing. I have little faith in lawnmower shops though they can fix anything if you are rich. I do thank God for KZbin for such people like me living on a small budget. Again thank you Sir

I have 2 of these the 20 inch and the pro cut 560 absolutely brilliant mowers cut 2 foot high grass ans hundreds of acres of grass love mine

why didn’t you sort out the slow running speed, those machines have a centrifugal clutch; which stops the cutting blades rotating when the engine is ticking over / idle speed.

Good job roy 😊 me roy 2😊😊😊

It seems from the comments, I may have a faulty one. I’ve tried typing in the numbers to no avail whatsoever. It just isn’t finding the extender at all

I think you forgot to put the little screw on the ventilation gas tube.. and i think you are very lucky in the begining to trying to start the motor with wrong position of your hands..🙏