Diggin’ with Dylan

Пікірлер

@chadanderson-w4v 5 күн бұрын

What dealer are you using. It sounds like they really went the extra mile. I’m looking at the same setup. I saw this was a year ago, would you do the same setup after a year? Have you had any problems with it? It’s a big purchase.

@diggingwithdylan9092 5 күн бұрын

@@chadanderson-w4v I’m about 2 years in now. No issues out of the excavator and my dealer is amazing! The rotator has been good but had a few small issues and it was a nightmare dealing with NOX. On my next one I’ll go with steel wrist or Engcon on the rotator but I am happy with the performance and even reliability of the NOX so far. They just don’t have enough customer support. I used Apalachin equipment soloutions as my dealer they have several locations in TN and West Virginia

@chadanderson-w4v 4 күн бұрын

@ Ok thanks. That’s what I was worried about was customer support. Keep doing what you’re doing. I think your channel is about to skyrocket.

@diggingwithdylan9092 4 күн бұрын

@ thanks! Really appreciate the support! Can’t recommend the Sany enough! As for the rotator unfortunately Nox is the only one I have experience with so can’t truly speak for the others but have really enjoyed my conversations with the steel wrist team and would probably go that route on my next one. But I also have been really intrigued by CMP attachments tilt rotate bucket. Again no personal experience with it but for the price point would be a good stepping stone to the full blown rotator setup.

@chadanderson-w4v 4 күн бұрын

@@diggingwithdylan9092 Last question. Would you give up the grabbers for half the price. Ragnar gave me a price for around 23k for 360 bucket with tilt but they don’t have the grabbers. I appreciate your feedback.

@diggingwithdylan9092 4 күн бұрын

@ honestly now after I have experienced the full blown setup I wouldn’t give it up for anything! It is life changing and I uses the grabbers all the time. I will never be without a full tiltrotator setup again as long as I’m in this line of work. I think the CMP bucket that has tilt and rotate is what I would try if I was forced to go back. But Even CMP will tell you it doesn’t compare to a true tilt rotator setup. But it is a fraction of the price if you can’t afford the tiltrotator right out the gate.

@leaplacencia325 7 күн бұрын

i love your SY80 excavator

@tomrizzo1554 8 күн бұрын

That is a non operator

@gunnerranch 12 күн бұрын

So cool can we see more of this? What kind of laser?

@diggingwithdylan9092 12 күн бұрын

@@gunnerranch can definitely try to post some more videos of it. It is a Johnson brand machine mounted laser receiver. It will work with any rotory laser setup

@kahvac 15 күн бұрын

I just got thru with work today running a SANY 155U not a bad machine machine but the cab is small and uncomfortable and awkward getting in and out of this machine...its a 35,000 lb machine you would think the cab had a better more ergonomic layout ...oh well.

@kahvac 15 күн бұрын

Why all the decals blocking your view @8:15 ?? Really...

@diggingwithdylan9092 15 күн бұрын

@@kahvac they are a bit excessive lol but honestly have never noticed them being in the way. If they were on the forward window it would definitely be a problem

@M3SIGNS 29 күн бұрын

Yeah, I just have a Sany SY 16 mini 2 ton excavator and I took out a box that’s mounted in front of the under the seats that stuck out about 3 to 4 inches that had I guess we’re supposed to put the manual keep the book in it, which I would never do and then I that gave me more room and I can put my tiptoes on the bottom of the pedals and that’s how I go backwards

@Lifes-solutions Ай бұрын

Sany is made in Peachtree Georgia, 5yr 5000hr warranty. They own the steel mill to cut the cost.

@DirtRoadIndustries Ай бұрын

Really enjoy this type of video!! Can't wait to see more.

@Thefunnyfarm78 Ай бұрын

Takeuchi would not come to the job site to fix my machine with less than 50hrs and less than 30days when the fuel pump went out,(all I knew at the time was it just quit running on me) most prople would not have the means to load a 10,000 lb + machine that won't even roll when not running. I was extremely shocked and ready to cancel the sell and let them come get THEIR machine back!!! In short the dealer came and fixed it. smdh

@diggingwithdylan9092 Ай бұрын

@@Thefunnyfarm78 yeah the fact that dealers think that should even be an option is baffling to me! These machines cost way to much money!

@Thefunnyfarm78 Ай бұрын

@@diggingwithdylan9092 Amen!

@Thefunnyfarm78 Ай бұрын

awsome job brother 👍

@diggingwithdylan9092 Ай бұрын

@@Thefunnyfarm78 appreciate it sir!

@cain2655 Ай бұрын

I own a cat mini...funny thing is is that since early 2000's all cat minis are made in china also..But for some reason cat guys deny that...just use google and read it!! Good for u running Sany ive used many of them there good equipment..smaller one use a yanmar which is the second oldest japanese motor they been around since 1908!! awesome engine

@diggingwithdylan9092 Ай бұрын

@@cain2655 appreciate you watching and the comment!

@lightning9279 Ай бұрын

Most people don't know that Sany's business model is genius. Sany legally took the expired patents of older Caterpillar equipment tweaked them a little and are now able to offer lower prices and great warranties. Since they invested in no to little research and development they are able to pass that savings onto customers and still have a viable profit margin. They may not have all the bells and whistles but who cares. Men are putting money in the bank and food on the table with these machines.

@mikeingeorgia1 Ай бұрын

Was it beeping when you were changing attachments because the quick connects were disconnected?

@diggingwithdylan9092 Ай бұрын

@@mikeingeorgia1 yes sir. It’s an alarm just to let you know the quick coupler is open and bucket isn’t securely attached

@rtundlt1 Ай бұрын

i know this is an older video but i just bought a SY35 pro from Appalachian Equipment in Athens. Seem to be a good dealership and I was very impressed with how smooth the SY35 operated. The Pro has a 4 way blade, larger cab, extra air vent and an air ride seat. I don't have much experience with excavators but the Sany just checked all the boxes I needed checked and offered good credit terms and a whale of a warranty. Your video gave me confidence I made the right purchase. Thank you.

@diggingwithdylan9092 Ай бұрын

@@rtundlt1 awesome! Glad I could help! Appreciate you watching!

@RCsDirtworkandExcavation Ай бұрын

Hey what about was the price on the enclosed 35? I’m looking at getting a 35 myself.

@rtundlt1 24 күн бұрын

@@RCsDirtworkandExcavation with a 36" grading bucket, WB hydraulic thumb and manual coupler and a 36" VMC brush cutter installed I paid $65.000 at Appalachian.

@jerryhammack1318 Ай бұрын

Many old homesteads in rural Areas have rough cut timber with square nails and if the roof didn't leak the rafters and base frame timbers are still rock solid and the square nails look brand new after 100 + years old! ❤! Greatly appreciate how you carefully removed and separated the house! Not all demo needs destruction but preserving the materials for future use! Blessings and best regards to your future endeavors.

@robbiesmith9786 Ай бұрын

Price?

@jerryhammack1318 Ай бұрын

Giving JCB a competitor! I am all for it . Not a fan of any JCB that I have ever ran. But this machine checks off a lot of one machine small area jobs that I have come across!

@BLACKROCKF350 2 ай бұрын

Any way check out lesu rc and tucan hobby for ones that are actually hydraulic and steel

@diggingwithdylan9092 2 ай бұрын

@@BLACKROCKF350 yeah I am aware of those models but they are way out of my budget for a toy. I designed and 3d printed this from scratch!

@BLACKROCKF350 2 ай бұрын

@@diggingwithdylan9092 good job it looks good

@diggingwithdylan9092 2 ай бұрын

@@BLACKROCKF350 thanks!

@BLACKROCKF350 2 ай бұрын

Hmm my comment removed

@prestonmoore8643 2 ай бұрын

Sany makes a great machine all of the important parts are high quality engine,pumps fittings etc plus a 5yr 5k warranty plus the price you can't beat it IMHO

@Ninjump 2 ай бұрын

Well appointed - definitely gives me something to think about

@Joy_PeaceLoveLight 2 ай бұрын

Love this song oh yeah!

@fr4301 2 ай бұрын

The bucket angle does really change the distance the receiver to the ground. How do you do so it’s everytime at same position when you Check ?

@diggingwithdylan9092 2 ай бұрын

@@fr4301 not an exact science. I wouldn’t use this method for extreme precision. Just do the best I can

@mrmr6563 2 ай бұрын

Excavator operator for 10 years, nice work man

@diggingwithdylan9092 2 ай бұрын

@@mrmr6563 appreciate it!

@nelsontejeda3017 3 ай бұрын

No! Backhoe s are not out dated!🇺🇸

@john8931 3 ай бұрын

Have you considered using shower caddy with suction. cup for storage?

@pjs5191 3 ай бұрын

Love track loader work. Always searching for more track loader content and the Deere is a definite plus too. You’re right Deere track loaders aren’t as common especially the 605.

@diggingwithdylan9092 3 ай бұрын

@@pjs5191 thanks for watching! Really appreciate it!

@GaryDean-wf4iw 3 ай бұрын

First class jerk

@louielouiepks 3 ай бұрын

Turtle soup

@JMS-to3xb 3 ай бұрын

Jesus man, is this the best thing you have to offer society? I can't help but wonder how a mind like this works.

@maxmannella4073 3 ай бұрын

Just trash. The accent, the holes in the shirt, shooting from his work truck. ⚪️🗑️

@flaccoohno5206 3 ай бұрын

Bro....not gonna lie thats cold....im sure fish and what not get a snack but is it really necessary to shoot em? Turtles are cool bro i stop and help em across the road all the time

@bradleybrown8399 3 ай бұрын

Because turtles are omnivores. And if that's a fish pond those turtles will feast

@mbw5 3 ай бұрын

Turtles? Why?

@ptolemygrey5813 3 ай бұрын

Why not relocate them ? Or at least make turtle soup or something 😂

@diggingwithdylan9092 3 ай бұрын

@@ptolemygrey5813 tried that on the last pond I did with over 70 snapping turtles!! They don’t particularly like to be handled and that many turtles would be a big job to relocate 🥴 farmers don’t want them around

@guitubagrips9719 3 ай бұрын

@diggingwithdylan9092 you amd that turtle are both guests here. Destroying gods creation is the folly of unwise men

@Thefunnyfarm78 3 ай бұрын

like secret service for the fish 🐠😂

@diggingwithdylan9092 3 ай бұрын

@@Thefunnyfarm78 exactly 😂

@maickel1988 3 ай бұрын

Why do you have so much weight on your boom? That thumb is so much unnecessary weight since you have a nox tilt rotator with a gripper😅

@diggingwithdylan9092 3 ай бұрын

@@maickel1988 that’s what everyone says until it’s time to drop the NOX off the machine. It handles the weight perfectly fine I can still overflow my 59” bucket and the machine is stable. I kept my thumb so that I can take the rotator off for rough demo work and for land clearing.

@GarlandKent-y6k 3 ай бұрын

[ nice, looking equipment trailer. I, just bought a 1988, eager bever 20- ton deck over equipment trailer tandem axle duel wheels fold up ramps and air brakes]

@diggingwithdylan9092 3 ай бұрын

@@GarlandKent-y6k sounds like you got yourself a good one! It’s a very essential piece of equipment that doesn’t get much attention!

@GarlandKent-y6k 3 ай бұрын

[ thank, you for youre video. nice looking bull dozer. i, just bought a 2002, 939c cat track loader bull dozer with a 4&1 bucket for $40k]

@diggingwithdylan9092 3 ай бұрын

@@GarlandKent-y6k those are nice machines! I love a track loader! I’ve upgraded from this old cat to a newer JD it has a 4 in 1 bucket! You can check it out on my other videos!

@wendypilley1505 4 ай бұрын

Great song by Eric Church. The house should have just had the corrugated iron removed and then set alight, bye bye house 😊

@ericmenehune100 4 ай бұрын

I wonder how many families stayed there? How many kids raised there?

@jasdunlop9907 4 ай бұрын

Tidy digger well set out with thumb and tilt rotator .dear Santa !!!!!!

@diggingwithdylan9092 4 ай бұрын

@@jasdunlop9907 haha thanks for watching!

@JohnathonAnstey 4 ай бұрын

JUST BOUGHT MY OWN SANY SY80U - CURIOUS HOW MUCH MOVEMENT DO YOU HAVE ON YOUR SY80 WHEN ROTATING THE BODY AROUND AS IN SLEW. MINE WHEN ROTATING BRAKES TO STOP THEN SEEMS TO BOUNCE BACK AND FORTH.

@diggingwithdylan9092 4 ай бұрын

@@JohnathonAnstey I’ve not noticed enough on mine to be concerned with it 🤔

@JohnathonAnstey 4 ай бұрын

@@diggingwithdylan9092 appreciate the feedback at cab its about 3 inches from left to right they said its normal just alot compared to kubota

@diggingwithdylan9092 4 ай бұрын

@@JohnathonAnstey no problem. Happy to help anytime. Overall it’s been a great machine for me!