PoE injector = ethernet cable?

What is it like with heat? It gets really hot in the GC and I've actually had the legacy UDM die on me due to this.

It'd have been nice to talk about the thermals during all these tests. I read this thing is getting really, really hot.

I installed 5 of these yesterday. So far so good, no issues during setup with the new units. I was a bit shocked at how hot they run compared to some of the other models.

Are the notifications free of subscription on C540V? Thank you

Can these be used as a WAN failover for UDR, UDM and UX setups?

Any issue with using the Samsung drive? What steps did you have to do beyond simply plugging it in? Do you have to partition and/or format the drive or anything like that? Unifi system recognized the drive no problem?

I'm pretty new to starlink I just installed gen 3 yesterday and the wifi signal is really weak through out the house, I just need an extender for guests etc.. will the TP Link RE450 pair with the gen 3 router through the tether app?

10:28 Shout-out to UI marketing for clearly labeling it as 1.5 Gbps with IDS/IPS. Looks like it checks out!

Great video - very clear I have the tplink switch out to 4 EAP225 waps Can I also connect my old wifi router into the switch and then that be a second network (diff SSID)? Will it just be plug and play or must configure w OC200 controller?

it's been said that the NS (no storage model) will not have a drive sled.

Well describe❤❤❤

Thanks for the explanation of the mounting options. Ubiquiti does a terrible job of explaining this in their documentation. At 3:10 you say "if we push this button, we can take this plate off". However, the button has nothing to do with removing the plate. That was an assumption on your part. The plate is held on by a small plastic nub at the TOP of the plate that fits in a small hole at the top of the device. This is what holds the backplate on (besides the optional screw). The button does nothing for removing the plate, and if you look, it contacts nothing on the inside. You can remove the plate without pressing the "button". In fact, it is not a "button" at all, rather, is it a pivot point for the softer material that surrounds the split in the plate at the bottom for putting your terminated cable through. Also, think about it - if it were what you say (a button for removing the plate), it wouldn't work because as soon as you slide the device onto the backplate, you don't have access to the "button" to remove it from the plate anymore since the "button" is behind the device (and behind the plate - pressed tight to the wall) now. :)

Recently received and installed; working great, particularly like the load-balance feature.

Nice vid, can you explain the usecase/benefits of smart queues if they are set to the max connection speed?

Best explanation of setting up a mesh system via a Starlink ISP! Appreciated that there were variations of equipment brands.

Can it run 80+ devices simultaneously without having issue?

That bent on the cable head is badddd

is this too old to put in a small biz (5 users) in July 2024? 2024 Cyber capable?

Will be great when it works. Currently the directory does not allow you to add tenants. Unless you set them up as a Admin. Tennants cant use the identity app yet. Also another problem is the back light number stay on and cant be turned off.

So if this is in an environment like an apartment complex, will guests be able to dial the user in the directory and allow the user to unlock the door from their app?

Hi! Can you turn, twist AND tilt it ? I want to know if you can mount it to a wall and turn it left/right... or if it just tilts and twists.

Don't buy this stuff if you live in the UK. The returns process is done by sending stuff to the Netherlands. Your products get customs charges for returns! This stuff is garbage! I was offered instore credits to cover the customs charges! I will not be buying more items to send to the Netherlands! Very poor customer service.

Tks for the video and got useful info... Does the camera got night light on them? Your color video was pixelating but not sure it was the camera or youtube lousy video encoding... Wonder how far the light and color works..

this guy dont know what he is doing f idiot test before you record movie jezzzzus

Isn't that a EAP235 in wall?

can i use cloud key gen 2 as well?

Can you turn off the router feature and just keep the cloud key features?

Ordered mine. I'll probably be waiting 6 months minimum.

what abut whait list

So this device doesnt need any cloud key device?

I'll get one more renewal out of my SG230 ... but then I'll upgrade to the XGS equivalent ;)

can starlink integrate with hikvision ip cctv ?

Thank you for the in-depth info on the VIGI system, it has been most helpful. I do have 2 questions though and hope you can guide me. 1. If for example I installed 4 X Wi-Fi cameras connected to our local Wi-Fi. Can I view the Live Feed of all 4 at the same time or would I still need an NVR on the LAN? 2. If using the VIGI VMS software can I view the live feed of all Wireless and Wired Cameras simultaneously? Thank you!

Cannot seem to get the Intercom Viewer anywhere in the UK

very informative video. thanks Tech Geeks

Finally an explanation that makes sense. I’ve added security cameras around my property, it’s only a 140’x 50’ lot and a metal garage and a wooden garage. I’m still watching the video and the reviews at the end to decide on which ones I need. Your video is very clear and concise in setting up the equipment.

It would be good to see some configurations guides for the UISP_Console as there is nothing on the Ubiquiti web site.

hello sir do you want to hire an video editor ? I am an video editor ,If you want then please reply . btw your channel have many useful videos Thanks 😊

Uid and prot forwarding problems reoling losing businesses

Is it possible to run the intercom without viewers? We would like to add mobile (app) users to the directory of the intercom. The visitor selects the resident from the menu and the resident then receives a push notification and can open the door. Is that possible with the UA-intercom?

this is great but i wish I could power it using poe or even a power adapter. I have 2 APs and a dream machine pro -se which has only 2 PoE+ and I need the U7-PRO-Wall for the office

When you have more than one intercom (hopefully in the future also supporting the G4 doorbell pro) does it work with the same viewer? Or do you really have to attach a viewer (or more) to a specific intercom?

Thanks for the video. I'm struggling to block access to the default/management network from another vlan/wifi network. EG. Despite configuring firewall rules to deny WiFi vlan 192.168.47.0/24 access to Default LAN 192.168.1.0/24. Any ideas?

Ok, great video. i think i understood. I have a house with a cable modem and router. So I'll have one of these devices there. Then i have a barn 500ft (150m) away. I need the other one there. But then the barn has network devices, wireless and PoE cameras. How do i hook these to this 2nd nanobeam? Do i add a switch and/or access point off of the nanobeam in the barn? Thanks!

A performance review would be helpful.

Hello, may i ask a question? I have a gen 1 nanobeam. If i download the configuration of this one and i upload it on a nanobeam gen2, does it work?

I have had similar PTZ cameras, never from TP-Link, and they always lack security in their functions: When the camera is in PATROL mode, patrolling the areas, and detects a human intruder, it continues the patrol to the next area, losing sight of the intruder instead of stopping the patrol function and following the intruder. Does the same thing happen with this VIGI C540-W camera?

did i hear it right that this device can power by 48volts?

Does it support POE?