Was just for fun - explanation link is in description ;)

I have the Aria 2 RGB and do you mean opening battery flap ? If you push/swivel from the bottom of main torch unit so it swivels round from the headstrap mount, you have to push quite hard first time. Then to open battery flap put your finger behind the edge above petzl logo/button and pull forward till you hear click and the battery cover just pulls open. I suspect you are just not pushing hard enough, do it somewhere warm so plastic isn't brittle and it will push round.

If you have tail wag on both, I'd check for slop in tail mechanism, turn gain down and finally try trimming blades down and balancing as those are most likely causes - they are quite twitchy so are you sure your just not expecting too much from small heli?

​@@jamesb72 James glad u are Still Around !. Im learning. 17 year elec foam plane flyer. Have 150s,230s v2, nanos3, blades. The 150 an 180 interchange many parts. 150 has dedicated tail motor. I intend to include ur input as I fiddle with my 180's. Bought used all of em ebay cept the nano 3. Yea the 180's I have are beautiful Engineering, I think they were Sold on ebay for tail problems, yea Expecting pnp, no problems,, lol. Ill accept it is what it is. Have u seen the Horizion Hobby "700. Blade Infusion" just Launched, ? Regards John Prattville Alabama USA

@@oldmandoingstuff8997 Hi John, motored tail is much simpler and easier to maintain as tail generally either works or it doesn't, so can see why Blade are going that way - I think tail wag is something you can fly around to some extent, I still have a couple of MCPX v2s I fly indoors every winter and really enjoy the challenge but the tail is fairly sketchy - but I can flip inverted and hover around in small space, so works great for me and they owe me nothing. I do think if you have two 180s both with similar tails and you've checked no slop and played with gains then thats probably just how they are, but still great fun. Happy flying.

No height restrictions but armbands are NOT allowed so rapids are only for confident swimmers. The pool at the end is deep so need to be able to swim to the side to grab rope to pull round to steps.

Thanks for your quick reply. Are there height restrictions on the indoor slides? Sorry for all the questions it’s just my son has dwarfism and although he’s 13 he’s the height of a six year old. He’s a good swimmer but my concern is he wont be able to do what his younger sisters can do and that makes it awkward!

@@paulnormansellartist I don't work for Centerparcs, but at Longleat there are no restrictions on the indoor tube slides or the ramp slides. The only height restrictions from memory were the larger Typhoon and Cyclone rides in tubes - just googled centerparcs height and there is a list of rides blog.centerparcs.co.uk/posts/fun-for-all-at-the-subtropical-swimming-paradise.html

It is 1m 20cm

Its a std RC Lipo battery on Phantom1, so I use cellpro balanced chargers at 2C

We're finding range amazing even behind trees or bushes but its been dry here (a wet tree is much harder for rf to get through iirc). Certainly amazingly better than the old analogue fpv gear I used a few years ago which would only cover a few hundred ft and would go snowy behind any obstacles). But we're staying vlos mostly and have distance limit set 1600ft and not flown behind terrain only tree's/bushes.

I edited in movie studio but you can use youtube editor to clip or add music easily after uploading

Thank you

No, just got one to check and Aria2 RGB is far too wide so won't fit at all. Just checked and petzl website lists it as compatible, which is ridiculous ?? www.petzl.com/GB/en/Sport/Headlamps/NOCTILIGHT

​​@@jamesb72I don't understand this. Also ordered the Aria 2 plus RGB and it doesnt fit..

i returned it to canon for replacment just to make sure it's that a normal.. Stm lol

​​@@shad0w303hi may i know about the replacement? Is it still got the same issue?

@@haha_00190 I was asked for a replacement because it was very noisy during autofocus, when I got a new one, everything was fine, smooth, so if anyone had same problems you should ask for replacement.

@@shad0w303 isee, may i know what's your camera type?

@@haha_00190 Canon m50 Mark II