what grit sandpaper do you use after filing while tuning?
@Enchanted3DPrints2 жыл бұрын
You can buy a mandrel from PSI woodworking its called a collet chuck. I ended up returning the PSI brand due to too much runout and bought a Beall brand. Much better quality from the USA
@NathansFerroceriumrods12 жыл бұрын
Thank you for the tutorial.
@GrievenceCapitolist3 жыл бұрын
Hey , I have one of those . A squirt of saw gas and it fired up first pull after many moons .
@bcbryan093 жыл бұрын
Why is my insert sticking? If I use any volume of air it sticks
@danielvrana94443 жыл бұрын
Let’s hear it!!!!! You all are making calls that look great but sound like Shit!!!!
@sta39cee3 жыл бұрын
Are you using 11/16" O.D. o-rings on your inserts?
@sta39cee3 жыл бұрын
Great video. Query....have you ever used mineral oil for your finish?
@cottonhewitt80683 жыл бұрын
Very informative but camera work is bad
@bayoufowlduckcallsbojackso37634 жыл бұрын
What holding the block of wood I see a center point what's on the other side
@phancak4 жыл бұрын
Hi. Please help. Where to buy membrane for whisle call? Thanks
@gjuucfyu93934 жыл бұрын
Gud
@alandefelice89814 жыл бұрын
Thank you! I am hooked. You make this look easier than it is I am sure but I am dying to try to turn my own call. Do you sell a plan to do so with specs etc.? Not interested in the Plastic kits you can buy Would much prefer to do it right from scratch. Any suggestions?
@danhoke21104 жыл бұрын
Hey
@danielvrana94444 жыл бұрын
Yes I want to know also where you bought that mandrel? I’ve seen them but cannot find where to buy one? Is this a trade secret lol?
@NathansFerroceriumrods12 жыл бұрын
Here it is www.woodturnerscatalog.com/p/101/4400/apprentice-Collet-Chuck-7-Piece-Set
@danielvrana94444 жыл бұрын
What’s the oil Bath you use?
@thomasbrown78435 жыл бұрын
Where did you get the mandrel? Thx
@danielvrana94444 жыл бұрын
Thomas Brown did you find that mandrel?
@NathansFerroceriumrods12 жыл бұрын
get it here. www.woodturnerscatalog.com/p/101/4400/apprentice-Collet-Chuck-7-Piece-Set
@marceloarrechea9165 жыл бұрын
Muy lindo trabajo pero sus manos no dejan ver como terminar las piezas.Una pena
@mikenatrop50895 жыл бұрын
Thanks for the video on inlays, I wasn't sleeving and kept busting the ends off when I was turning. Nice to see a fellow Wisconsinite
@user-fi8ep1oq2w5 жыл бұрын
can help with the choice of wood ?? what use? and which one can be used?
@wingert30005 жыл бұрын
Where do you get your inserts?
@DrakeDropperCalls5 жыл бұрын
I make my own.
@wingert30005 жыл бұрын
You make your sound board to?(the plastic part) love the video btw
@DrakeDropperCalls5 жыл бұрын
Thanks, yes it’s made out of Delrin rod.
@frozenrope87665 жыл бұрын
whats the barrel length
@joej24095 жыл бұрын
Hi what did you leave it in overnight to water proof it.
@paulnew46155 жыл бұрын
What kind of oil do you use for your oil bath?
@DrakeDropperCalls5 жыл бұрын
Oils used are either velvit oil or boiled linseed oil.
@marklengal99905 жыл бұрын
What kind of oil did you dip it in?
@DrakeDropperCalls5 жыл бұрын
Oils that are used are velvit oil or boiled linseed oil
@vikkilott59236 жыл бұрын
Hi can you tell me what part did you get to drill on your lathe? How do you hold the chuck in the lathe? Or how do you know what size it is to order the chuck for the lathe? Thank you
@martyvagvolgyi54246 жыл бұрын
What size I.D. Do you have for the insert?
@jerrymartin36606 жыл бұрын
I was wondering what you made your black insert out of? Does not look like acrylic?
@DrakeDropperCalls6 жыл бұрын
That insert is made from Delrin plastic.
@jerrymartin36606 жыл бұрын
Drake Dropper Calls Thanks
@tzugg16 жыл бұрын
Did you use 200 natural velvit oil or deep walnut velvit oil?
@DrakeDropperCalls6 жыл бұрын
Sorry for the delay natural velvet oil was used
@paytonsimmons14126 жыл бұрын
How did you know that you needed to sand the tone board? When you blew on it it sounded great to me
@DrakeDropperCalls6 жыл бұрын
There are times like in this video I can tell that it will stick or be flat in time when going for a hail or comeback call. After doing many many calls your ear gets trained what to listen for and what you need to do to fix those problems.
@raymondroot65986 жыл бұрын
what size bands are you useing on your calls? 1"
@bucknut02566 жыл бұрын
Why use a gutsert on acrylic?
@DrakeDropperCalls6 жыл бұрын
Because it’s not true acrylic. It is a casted resin and doesn’t have the strength of true cast acrylic rod.
@pedalzworkshop52797 жыл бұрын
Those bands! Where do you get your bands made? Great content! Keep it up!
@DrakeDropperCalls7 жыл бұрын
+Pedalz Workshop I make them my self. Thanks it's about time for another video.
@jthenriksen34827 жыл бұрын
Hey I'm wandering what that stuff you dipped it in was
@DrakeDropperCalls7 жыл бұрын
+JT Henriksen velvit oil
@jamespuphal79067 жыл бұрын
is the barrel hollowed out all the way or half way
@gaoutdoors15987 жыл бұрын
I know a trick to burn wood faster is use 2000 grit sand paper and hold on till it smokes
@pauldavies93pd7 жыл бұрын
lovely calls, thanks for sharing
@hunterbondoc83697 жыл бұрын
Are they for sale?
@DrakeDropperCalls7 жыл бұрын
+Hunter Bondoc This video was shot over a year ago calls have been long sold. I can make a call out of just about any type of wood you would like. Feel free to contact me via email with any other questions. [email protected]
@hunterbondoc83697 жыл бұрын
Drake Dropper Calls ok will do
@FatManChubz7 жыл бұрын
Hey man, awesome videos! I Just got a wood lathe for Christmas and I want to start make some duck calls. Are they're any must have attachments that you recommend. And I have never used a wood lathe, only huge metal lathes. Thanks for any tips! Keep up the beautiful work!
@DrakeDropperCalls7 жыл бұрын
+Chubbs Outdoors Thank you. Best if you shoot me an email would be easier to discuss what you will all need. [email protected]
@crosstiesbeagles7 жыл бұрын
what do u dip in?
@DrakeDropperCalls7 жыл бұрын
+David Whitaker velvit oil
@georgecesarini77486 жыл бұрын
Drake Dropper Calls I was going to ask the same thing. It came out such a great color and that light semi gloss shine I was hoping you were going to buff it cause I knew it would just add that extra little pop. How long did you leave it submerged in the oil? Love your videos bro. I’m a big waterfowl hunter and am calling waterfowl, Turkey, predators etc all year long. I’ve also always been artistic and able to make things with my hands. But you and your videos convinced me to buy an old wood lathe, some wood scraps, gouges and I just finished my first call that actually turned out perfect start to finish and sounds great too. Lord knows I went through what felt like the Amazon rainforest worth of wood before getting here lol. It was perfect timing though because I’m giving it to my son for his 1st birthday in a few weeks so he can start tagging along with his daddy and his uncles and help give our lungs a rest while unknowingly sparking that passion we have for the outdoors in him and keeping our sport alive and strong through the next generation. He is always getting into my calls now and could blow a hail and come back call or feeding chuckle with better pitch and cadence then most adults I know. Plus he was doing this before he could walk or spoke his first word. It’s really cool to see and I wanted to say thanks for sharing these videos. You definitely opened my eyes to a whole new arena of the hunting world. And my son is getting a pretty nice walnut double reed that he will be able to teach his boys on and think of me every time he hears it long after I’m called back home to that endless hunting season in the sky. God bless my friend. Keep cuttin em
@mattyarborough46887 жыл бұрын
Great Video. When gluing the barrell it was still a 5/8" I.D. with 3/4" O.D. tenon?
@DrakeDropperCalls7 жыл бұрын
+TxQuackStacker Matt Thanks. Yes the barrel blank is drilled out at 5/8" and then the tenon is turned down to 3/4".
@matthenry45937 жыл бұрын
Blow them I want to see how they sound!!
@DrakeDropperCalls7 жыл бұрын
+matt henry These calls were made over a year ago they have long been sold. There is a current video up that has clips of tuning a call towards the end.
@timothyrice81947 жыл бұрын
hi hey where did you get your mandrel from
@DrakeDropperCalls7 жыл бұрын
+Timothy Rice I believe these were purchased from Enco a few years back.