You video says that Teak Oil is toxic and should not be used on any surfaces coming in to contact with food, however most manufactures say that their Teak Oil product is generally okay for food contact ONCE FULLY DRIED. Can you please comment on this?
@repaintnowАй бұрын
If you need a food safe wood finish, I would recommend Mineral oil, Tung oil, Raw linseed oil, and Walnut oil. Once thoroughly cured, these are completely food-safe. Still want to use teak oil - I recommend checking the label. If it's marked food safe you can go with it.
@patrinaleesam5006Ай бұрын
Thanks for the vid
@repaintnowАй бұрын
Glad you liked.
@paris16rta2 ай бұрын
So helpful - for our school project we are building raised garden beds to grow native plants in hopes of attracting pollinators. For three of the beds we painted with exterior latex low VOC paint. Now we're thinking to be completely safe we want to go with milk based paint. If we prime and paint over the low VOC paint that is currently on the beds, is it now safe for plants? It was painted well over 6 weeks ago and has been outside if that makes a difference. Thank you so much!
@repaintnow2 ай бұрын
Glad to know it's helpful. Yes, I think it will be safe to apply milk paint over exterior latex low VOC paint. To be more effective I recommend sanding the surfaces lightly before you apply the milk paint.
@paris16rtaАй бұрын
@@repaintnow You're the best!
@SouthernFryd2 ай бұрын
Didn't see any repaired brick at all.
@brandon79132 ай бұрын
Thanks I see so many people usingTSP on ceramic back splash
@ST-03114 ай бұрын
"Some of these methods may not be suitable for heavy loads..." Right. Like all of them.
@JessiOz2k075 ай бұрын
Whats the best method to fill screw holes in wood door when you need to screw back into the same filled in holes?
@repaintnow5 ай бұрын
If you need to fill screw holes in a wood door and intend to screw back into the same filled holes, select a wood filler that matches the color of your wood door - you can find wood fillers in various shades to blend seamlessly with different wood types. Using a putty knife or a similar tool, apply the wood filler to the screw holes. Press the filler firmly into the holes, overfilling them slightly. After filling the holes, use the putty knife to smooth the surface of the wood filler. Make sure it is level with the surrounding wood and allow several hours to dry completely.
@FORTUNEAK5 ай бұрын
Dish soap
@ahhhh94906 ай бұрын
Would a flower based body oil work as well?
@repaintnow5 ай бұрын
I think yes, but only for a small project you can try and see the results. If it's an important project like painting an entire wall or a room I would not recommend it. Some body oils may contain ingredients like shea butter or cocoa butter to provide additional moisturizing and emollient properties and this can affect the finish and durability of your project.
@michaelmurtha61467 ай бұрын
Should not be used in cereal 🥣
@Afelood9 ай бұрын
what about wood gloors
@Afelood9 ай бұрын
floors
@nasirmajeed41189 ай бұрын
Good information
@texasgigi368410 ай бұрын
Thanks for a very helpful video!!❤
@RxCalyx10 ай бұрын
Thank you
@jennifersimpson775210 ай бұрын
that makes no sense to me.. don’t touch for 3 hours while the dry.. And once every hour open and close door to prevent sticking?? is it me that thinks this is contracting
@JayBSinging6 ай бұрын
I suspect by "don't touch or move the hinges" they actually mean physical contact like touching it with your fingers or removing the screws. Swinging the door is fine.
@carolynepegues93765 ай бұрын
I really don't want to spray paint them, way too messy. Can I use a brush/sponge and have it turn out well?
@selloanephanzi767611 ай бұрын
Where can I buy it
@deborahfairbanks401211 ай бұрын
Thanks!
@judykelley968411 ай бұрын
Can tsp be used in laundry?
@stageiiwappie9507 ай бұрын
Yes but might be overkill and bad for envirenment
@FMarie-po4mh11 ай бұрын
I painted a hutch with the doors attached. Now the doors will not close all the way. The paint on the hinges did something to the doors. What should I do?
@Slimthixmama Жыл бұрын
God bless u fr
@Slimthixmama5 ай бұрын
@@thesunflowertheory for real
@user-gr4yk6gf6e Жыл бұрын
Thanks for the updates
@sandragibbs5667 Жыл бұрын
Thank you for this great information.
@jmack619 Жыл бұрын
We used 2 part epoxy, which was supplied by the cork tile manufacturer. What say you ? Thank you for your video and info !
@jasongambrell4762 Жыл бұрын
Works really well on getting soot off of brick. Put it in a spray bottle
@repaintnow Жыл бұрын
Thanks for sharing your thoughts jason. Yes it works great for the black soot and molds also when used in spray bottle.