The Bambu is like half the size

27:11 is it aluminium? Not nickel plated copper?

They will 100% lock all of this behind a monthly charge once their market share is high enough.

So throwing away reliable printers for Chinese crap. Smart move

Got the Qidi X Max 3 they are so underrated but so good Printers, Huge Build Volume, fast Speed, Heated Chamber

I've heard that wargamer resin is less smelly

The can bus board has an accelerometer onboard.

Or the A1 not just the A1 mini

These reviews are so good. Every question I may have had is answered and more. The editing is spot on, great shots as well and the whole thing makes retention easy. Love the historical issues and fixes too, nice touch.

Just landed on your channel and have to say the quality and honesty of the videos you are putting out is top notch. I can see this easily being a maker community staple channel. Great job man, and thank you! ❤

Hi guys. While printing, an error message pops up that says 'print error' and the printing is being interrupted. Any ideas? The strange thing is that up to the printed layer, everything looks great and then it just stops printing with this message. I have tried cleaning up everything, using new resin (or even no resin at all with the same file) and leveling again, but still the problem remains. Any ideas?

Variable nozzles is the next big step.

Great hardware let down by bad software and poor configuration. Shame, because it has so much potential

this seems like a GIANT over site for a $4000 printer.

Do you know if I Could I use the I2C pin that is available on manta 8P V2 board for using Eddy Coil version? or the unique option that i have for connection is usb connection mode?

Great vid, but I miss the new RatRig!

Ive got the xtool d1 pro.. its by far my most favourite machine to use 👍

My last employer had two Form Labs 2 machines.. I wasn't impressed by them at all.. though I think that could in part be due to how many people were using them.. or misusing them 🤔 I've got a CR-30, Kobra Max, I Mega and a Delta Kossel.. the Mega is my most reliable machine and that form lab experience is what has put me off adding resin to the list.. but I think this printer and its reviews have swayed me to buy...

Does the Eddy current sensor work with all types of bed materials? How about using a BLTouch-like setup with a smooth, metallic ball that moves slowly and continuously registers Z-axis displacement? It could perform an initial probing to adjust for any wear and use a random path to cover the entire area, so it doesn’t always drag over the same spots. Plus, the slow movement helps reduce noise. Or maybe a laser sensor, though it might struggle with glass or weird texture/colored beds due to refraction issues. What would be the most precise system?

probably dum question but do you have installed eddy on a rpi4 ? i have a ender 5 plus with merlin (klipper firmware) with rpi4

When i type in bedmesh_calibrate method=scan etc in defaults to manual probe. When i use BTT_bedmesh_calibrate it probes individual points on the bed. Help i have eddy coil

Thank you for the videos, really enjoying your review style. I'd like to see you review the Peopoly Magneto as well.

As awful as bambu.

Shieeet, my $150 creality ender 3 can be overclocked to these speeds.

Great review. One thing you forgot to mention about the Falcon2 Pro is the laser head capability to switch from 40 watt for cutting to 22 watt for engraving (or 20 depending on your source). This is why I am going with the Falcon2 Pro.

Everyone was so excited for this printer lol

Next do all carbon for the Mars rovers.

I cannot understand what were they thinking when they released this train wreck. Such a pity, it seemed promising...

Clough42 sent me 😊

This is how all reviewers should do reviews

1499 us for something that's not finished this is the problem with this company I purchased one of their first printers it wasn't even ready for Market I got suckered with it have it here at the doorstep try to have them replace it send me parts or replace it and pay something extra to exchange the machine they have not done nothing they made agreements back pedals I have tons of emails back and forth with them and they've never taken care of it still have the unit as a door stop the new hardware might look good still the same garbage company

The CPAP Fan intake is so wrong when you print you want a hot chamber and "hot air" from the Chamber for Fan(s) so when you print with ABS you cool too fast your layers and then your layer adhesion i like nothing

Regarding maintenance and comparing hotend maintenance between S1 and Bambu is just not correct, one is delta and one is core xy printer. Completely different kinematics which in case of delta are surrounded with rods and you dont have so much physical space as on core xy printer.

Sems like it takes only one and the rest folow ..

As a human who enjoys driving car and doing walk I think it's important to keep in mind how much ground breaking processes have failures and we should be 100% certain FLSUN will sort these issues that come with ground breaking innovation out.

Great review. Printer developed by deaf engineers for deaf users. I can't imagine that someone can be in the same room with this printer. The worst thing is that the printer makes sounds even when it is not printing!

FLSun getting cooked! Wow its been a while since all the 3D youtubers ripping a product this bad at same time.

This level of blatant lies on the specs/functions isnt really acceptable

All of the flsun claims aren't true 😅😅

The truth about this printer is that it is a lie, a spawn of Satan.

Did y'all ever film an update for this?

The Q1 Pro that is now being delivered is revised and has some improvements (Q1 Pro v2). Things like the LAN port, side filament entry, build plate stops, power switch is now easily reachable from the left were adressed. They also have in the meantime released some gcode files for am ore robust spool holder - top or sideways mount.

20:10, Fisun was also deceitful in previous versions. Probably there is no 100% honest manufacturer. It seems to me that the problem is not with marketers, but with their followers, who are ashamed to admit that they are being deceived by those they fanatically pray for. The world needs adequate people who do not lie or conceal, who test and compare and share this data with other people. Thank you 🫡

great review! just a small note, you probably need a special pla that can melt faster to achieve 100mm3s, like polysonic for eg. one channel did manage to get it and it should be possible with such a large melt zone.

Would you be able to test the max flow rate at higg temperatures? For example 260c PLA. I've seen lots of tests for flow rate but people are still using 200-210 c for the test which is way too low for high speed printing. Ny Kobra 2 ( with cht style brass nozzle) can just about manage 50mms³ at 260c 0.6mm nozzle But at 215 only just about manages 32mms³

A very good review. I do like the insights. Keep up the good work

can you run EDDY USB to RPI when using SB2209?

I ordered a T1 expectation being it would be better than a SR, have klipper, WiFi and an enclosure yet cheaper than the v400. If print speeds and quality remain the same I’m ok with that. However the delivery date advertised has been 5 months longer and I have purchased my first Bambu and now regret the order. There is no way the T1 is going to be as good.