I am an old school carpenter and am extremely fussy, to see this level of creativity, craftsmanship and attention to detail in this boat has restored my faith in craftsman. Absolutely awesome.
@bluewaterboatbuilder24 күн бұрын
Thanks for watching! We are pleased we have restored your faith in high quality craftsmen 😊
@christinewilliams930528 күн бұрын
How much was it?
@bluewaterboatbuilder27 күн бұрын
If you can email us we can let you know the specification, the additional costs and the overall cost.
@dorothydotson715428 күн бұрын
Lovely boat.
@bluewaterboatbuilder27 күн бұрын
Thank you 😊
@leejentaylor6195Ай бұрын
you didn't even go in it...what's the point of the video
@bluewaterboatbuilderАй бұрын
Real customer feedback. It’s easy to show video of the inside of the boat but authentic feedback is really important to us. You can see inside the boat on this video. kzbin.info/www/bejne/pqqVhWp4gKmCr9Usi=PJ45x6dFZmCWHbOL
@christinewilliams930510 күн бұрын
How much was it please?
@GrahamSwan-yi5gwАй бұрын
We are so looking forward to the build of our wide beam “BISON” and agree with all of the comments and that’s why we chose Blueatwer Boats as our builder .
@johnmugbusiness5127Ай бұрын
I have done a lot of in-depth research and can say one of the few top builders out there. Very knowledgeable and has very knowledgeable skills about paint protection systems also. You will be very happy for sure.Enjoy 👍
@bluewaterboatbuilder23 күн бұрын
Thank you for watching and for your comments. We certainly pride ourselves on our paint systems 😊
@bluewaterboatbuilder23 күн бұрын
We are so looking forward to building Bison and meeting you both later on this year 😊
@GrahamSwan-yi5gwАй бұрын
We are really looking forward to the build of our 60 foot widebeam “BISON” and agree with all of the reasons why you would chose Bluewater as your builder. Cheers Swanny & Kath
@bluewaterboatbuilderАй бұрын
If you’d like to see inside the electric boat please check out this video. kzbin.info/www/bejne/pqqVhWp4gKmCr9Usi=PJ45x6dFZmCWHbOL We hope you like this video giving an insight from our customers. If you would like to buy a narrowboat from Bluewater Boats, please call us on 01926 811699. Alternatively please complete the contact request form at warwickshirearts.co.uk/bwb/
@1MickFuryАй бұрын
Such a positive enthusiastic salesman, not
@bluewaterboatbuilderАй бұрын
Well it did the trick as the boat sold!
@stephenhughes4943Ай бұрын
Politically correct. Let's see how winter stays happiness....
@bluewaterboatbuilderАй бұрын
We will update in the winter when we know, but for now 10 hours cruising without the generator running is good for the owner 😊
@mistybee527Ай бұрын
Can we book an appointment to see her on Saturday please?
@bluewaterboatbuilderАй бұрын
Yes of course I have 11.30, 12.30 or 1pm available. Let me know which time suits you best 😊
@mistybee527Ай бұрын
@@bluewaterboatbuilder 12.30 please if its still available, or any other time, thank-you, 😀
@bluewaterboatbuilderАй бұрын
Hi I have booked you in for Saturday at 1pm 😊
@GrahamSwan-yi5gwАй бұрын
Fantastic boat - so manoeuvrable - amazing underwater stern profile - love the trick with the fenders - looking forward to a wide beam build !!
@bluewaterboatbuilderАй бұрын
Thank you Graham for watching and your comments 👍. Looking forward to building your wide beam
@realmattjcАй бұрын
Great boat build. Hope to see it in all its glory at Crick 👍
@bluewaterboatbuilderАй бұрын
Thank you, she is truly stunning and cruises like a dream. Would you like to make an appointment to view her at Crick? 🤩
@mistybee527Ай бұрын
Wow, she is stunning! Hope we can see her at Crick too.
@AlFoxysNarrowboatLUNARАй бұрын
Very nice can’t wait to see it next weekend. How do we make an appointment 😊
@bluewaterboatbuilderАй бұрын
What day would you like to view her at Crick and I will book you an appointment?
@bluewaterboatbuilderАй бұрын
Let me know what day you are visiting and I will book you an appointment before the show as we expect appointments to be full during the show 😊
@nimbus_tvАй бұрын
What is the height from the center floor to the ceiling of the interior?
@bluewaterboatbuilderАй бұрын
Head height is 6ft x 6” internally, we can tailor make the head height to suit individuals
@nimbus_tvАй бұрын
@@bluewaterboatbuilder Do you think 7' is too high of a celine? Why did you choose 6ft 6''?
@bluewaterboatbuilder22 күн бұрын
It’s the air draught you need to be careful with with bridge heights.
@BAALABZVАй бұрын
Brilliant Information, About The Pitfalls, To Be Aware Of, When Buying Any Boat/RV/Car, etc.. Thanks For Taking The Time, To Educate, Potential/Customers, &, For The Boating Industry, To, Get Their Act Together.! To Stop, Ripping Of Customers.! Customers, ARE, The Boating Industry's, BREAD & BUTTER, Yet COWBOYS, Think Its Ok, To Endanger Lives.! Great Infomative Video, Your A Credit, To Your Industry.!
@RetroReganАй бұрын
I was really looking forward to seeing this "Luxury wide beam canal boat thats like a 5 star floating hotel" Majorly disappointed. You should rename it " Luxury wide beam canal boat builder, with glimpses of the boat" Too much focus on the presenter and not enough on the boat. When you view a boat you want to see the boat, not the guy who built it. Take a look at Nick's videos from Aquaholic. Thats how to present and show the full features of a boat.
@troytempest290Ай бұрын
These guys must surely be the best boat builders in the U.K..! Incredible workmanship. 👏
@bluewaterboatbuilderАй бұрын
Thank you so much for your lovely comments and thanks for watching. 😊
@ajw14672 ай бұрын
Great video what do you think about copper coat on hulls i read about in a canal magazine this month i always used on commercial trawlers i owed and had great results
@tonycamplin86072 ай бұрын
It really doesn't seem to be a practical proposition. If you can only cruse for 5hrs, that's nothing, you definitely need a minimum of 10 hours for summer crusing. You don't mention how long you'd have to run the generator at night to fully charge the batteries, this is without using any of the inboard equipment, washing machine, freezer etc.. It just looks like a very expensive project just to satisfy the greens.
@BritishAnts2 ай бұрын
One of those batterys would cover the fridge and washing machine for the year! I run mine and the kettle off 100Amp lithium and the solar tops them back up from 30% in the morning! These aren’t the old lead ones! I think you’re thinking it’s 1990’s green tech and it isnt!
@tonycamplin86072 ай бұрын
@BritishAnts I hope not, but the video said that you could only run the boat for about 5-6 hours a day, that's nowhere near long enough. I was referring to a freezer not a refrigerator.
@tompo74672 ай бұрын
It’s a cracking refurb there’s no denying that, although not without its problems as you say. But 125k is too expensive. With some experience of boat refurbs I’d say you’re doubling your money there give or take. I appreciate the inflation since Covid but, with respect, this boat is 30% too expensive. You can still buy a 3 bed house in half of the country for that.
@bluewaterboatbuilder2 ай бұрын
Thanks for watching and commenting. It is for sale at £115,000 not £125,000. However, sadly we are nowhere near doubling our money on this boat. It is a very good price for the boat with new boats costing in the region of £200,000.
@tompo74672 ай бұрын
@@bluewaterboatbuilder I don’t agree sorry. I think it’s way overpriced. No offence. Just my opinion.
@philelliott53272 ай бұрын
Very nicely done work. What are the benefits of a hybrid boat over a traditional diesel set up? Other than being a bit quieter, which can probably be matched with a good hospital silencer? Any fuel saving must be offset by the massive cost increase in the build. It's a lot of technology to push a skip down a muddy channel.😂
@Idle-Days2 ай бұрын
Vibration is considerably reduced whilst on electric propulsion, which is the worst source of noise in our boat, which has a hospital silencer. I think hybrid should provide the best of both worlds.
@davidrussell78372 ай бұрын
Looking forward to seeing this at Crick 👍
@ProjectNarrowboat2 ай бұрын
The one thing that struck me from day one was that there really seems to be a mentality of "we've always done it like that" in the narrowboat world. Fine if those things work, not so fine otherwise!
@bluewaterboatbuilder2 ай бұрын
Thanks for watching and commenting. We do try and show the difference shot blasting can make to a boat especially to people who have only known boats to be built Without it
@mjadams58292 ай бұрын
What a fantastic and beautiful makeover. The colors and other bits added have made the boat even more desireable. Great job and goodluck at Crick!
@bluewaterboatbuilder2 ай бұрын
Thank you 😊
@ocean6862 ай бұрын
Problem is the quality of the steel. Newer the boat, poorer the quality - Chinese import these days. I had 1929 iron build - still floating around somewhere - bit of paint every now and again to make it look good, but no pitting. Engine was 1930 - 2 cyl cov godiver (used in fire trucks) Only spares needed was inj nozzles, everything else remove,clean,put back. No money pit, and thump-thump all day.
@bluewaterboatbuilder2 ай бұрын
Thanks for your comments. The steel industry in the UK is virtually nonexistent due to decisions beyond our control I’m afraid 😢. Hence the need to import steel from China/Taiwan etc. however it still remains the same that the best thing to do with mild steel is to blast it and remove all of the contaminants 😊
@ismzaxxon3 ай бұрын
How long have canal boats been in existence. How long has epoxy been around. I wouldnt come down too hard on bitumin pain. Still being used in Australia on wooden hull vintage vessels.
@bluewaterboatbuilder2 ай бұрын
Thanks for watching and your comments. It is a proven fact that epoxy coatings last longer and are more effective than Bitumen. However it’s great to hear bitumen is lasting for you over In Australia 👍.
@TRICKY106663 ай бұрын
Stonking boat , not my colour of choice but it works and wouldn't want to change it👍😎
@bluewaterboatbuilder2 ай бұрын
Thanks for watching. If you were interested in her we can repaint her in a colour of your choice
@Chrisfeb683 ай бұрын
Amazing boat.
@bluewaterboatbuilder3 ай бұрын
Thank you and thanks for watching 😊
@user-ml3kf4yg8c3 ай бұрын
Enjoyed this video, you talk a lot of sense. Thanks
@bluewaterboatbuilder3 ай бұрын
Thanks for watching 👍
@douglassduplassie62713 ай бұрын
Too much wasted talking about the mechanics instead of the interior. The interior is awesome.
@bluewaterboatbuilder3 ай бұрын
Thanks for watching. We believe the mechanics of a boat are as important to a boat as much as the interior is. Unfortunately there are boats that are not built correctly mechanically and suffer from this failure. We build all of our boats with a hull/engineering/carpentry and painting perspective offering the best
@johnmurray98333 ай бұрын
Nice !
@bluewaterboatbuilder3 ай бұрын
Thank you. It has recently been reduced to £115,000 if you are interested
@d4dan7343 ай бұрын
I have seen some you tube videos of these boat repairs and I am aware of peddlers selling fake sacrificial anodes. Do you think this could be one of those boats that have rusted from this?
@bluewaterboatbuilder3 ай бұрын
Thanks for watching. I don’t believe so. I believe it is just down to not having the hull shot blasted and two pack blacking applied originally.
@quavernote43074 ай бұрын
Buy a Sea Otter Narrow boat all Aluminium no sand blasting needed fantastic boats needs a guy like Elon Musk to invent Narrow boat now !!
@bluewaterboatbuilder3 ай бұрын
Thanks for commenting. However unfortunately Sea Otter are no longer trading so not sure that’s an answer to boat owners problems. Shot blasting is still the best way to protect your boat
@tonycamplin86074 ай бұрын
As one other has commented im surprised that the environmental agency allows antifouling paint on the canals. Perhaps you could clarify this?
@markrant14604 ай бұрын
Hi Dave, In this video you are sitting in your office and on the wall is a poster advertising Vetus electric motors. I understand that they are an air cooled motor. Recently I watched a video about an electric motor that is liquide cooled. This is the link to that channel kzbin.info/www/bejne/jWWXY31joNKtedk Considering the experience that you have do you prefer one type of electric motor (air cooled vs. liquide cooled) over another and why? Mark Alberta, Canada
@bluewaterboatbuilder4 ай бұрын
Hi mark unfortunately it’s a very one sided test almost like testing a mini against a Range Rover and not even got the facts right. The Vetus motor is raw water cooled not air cooled and size of propeller is a massive decision based on cruising time against power ratio that Vetus have spent months testing not just half an hour hope this helps.
@markrant14604 ай бұрын
Thank you Dave for your response the video made things look too simplistic.@@bluewaterboatbuilder
@christinewilliams93058 күн бұрын
Hi Dave It’s me Christine the lady from New Zealand. I’m still umming and arring about which boat size to choose. I was wondering why the wide beam live aboard full time are free from VAT and why the narrower boats are not when living aboard full time on one. As it seems you can get a wide beam vat free for the same cost as a narrow boat with VAT. Where’s a good place for me to look to find out the running costs of both options please .
@d4dan7344 ай бұрын
I would question the sacrificial anodes on the boat. They seem to be the same size and shape of a new one? Be careful who you buy your anodes from.
@bluewaterboatbuilder4 ай бұрын
Thanks for your comment although I’m not quite sure what you are trying to get across. We bolt on magnesium anodes to all of our boats that are on the canal system. 😊
@phenogen81254 ай бұрын
I am surprised that anti-fouling is permitted on a canal system as they are basically soluble toxins and many canals end up feeding water supplies and also supporting vulnerable wildlife.
@tonycamplin86074 ай бұрын
I completely agree with you about that.
@RichardAnderson-zt8mq4 ай бұрын
Superb work guys - that's high-end automotive grade finish. Paintwork quality is everything in my humble opinion - you see three year old boats where it's already looking rough - and that's not good enough when you consider how much these things cost. Great job on the interior too - floating perfection I would say. Owners will be very happy I'm sure!
@bluewaterboatbuilder4 ай бұрын
Thank you for watching and for your lovely compliments. And yes the owners are very happy 😊
@RichardAnderson-zt8mq4 ай бұрын
@@bluewaterboatbuilderI'm sure they are! There are maybe a dozen or so builders out there but none of them put the thought and time and craftsmanship in as you guys - it's outstanding. Mrs A is nearly convinced and it will be you we come to!
@shwepepe4 ай бұрын
Just wondered if a stove could be fitted, even if at an extra cost? Basic white inside, but i like that can put my own stamp on it colour wise. Very informative video.
@bluewaterboatbuilder4 ай бұрын
Nothing is impossible to fit, obviously will lose a bit of space, a diesel stove would be better and take up less space but more than happy to discuss this. Could Possibly take out the sofa bed and have chairs instead to make a bit more room?
@wingmanwilsonalexander59264 ай бұрын
I am the lucky owner of this boat, and almost daily I get compliments about it's fabulous shine❤. I am so blooming careful with it, anally so, but little scratches and scrapes have unfortunately occurred. I'd love some top tips on how to polish them out/touch them up. I want her looking tip-top always! Theresa 😊
@WC4DOOR4 ай бұрын
From a guy across the pond knowing nothing about these boats, your quality is spot on. Are the boats made of only steel, or is aluminum or stainless steel an option?
@bluewaterboatbuilder4 ай бұрын
Thank you for watching from afar. These types of boats are only usually made from mild steel, stainless steel would be even more expensive.
@WC4DOOR4 ай бұрын
If I had one of these boats that needed fixing, I would find this guy to do it. Very well done.
@bluewaterboatbuilder4 ай бұрын
You know where we are if you ever need us. Thanks for watching 😊
@gordonchapman2224 ай бұрын
Fascinating stuff, thanks for sharing
@bluewaterboatbuilder4 ай бұрын
Glad you enjoyed it and thanks for watching 😊
@RichardAnderson-zt8mq4 ай бұрын
Wow - another lovely piece of top quality craftsmanship! You guys must be so proud when you step back and look at the finished article. The Art in Article.
@bluewaterboatbuilder4 ай бұрын
Thank you so much for your comments and yes we are all very proud of Elsie May II. There is another video due out soon of the build - keep watching! 😊
@RichardAnderson-zt8mq4 ай бұрын
I certainly will - with much interest! @@bluewaterboatbuilder
@AlFoxysNarrowboatLUNAR4 ай бұрын
Very nice we love the colour. Can’t wait to get our boat lunar on the cut